Module Awso_textract_syncSource

The X and Y coordinates of a point on a document page. The X and Y values that are returned are ratios of the overall document page size. For example, if the input document is 700 x 200 and the operation returns X=0.5 and Y=0.25, then the point is at the (350,50) pixel coordinate on the document page. An array of Point objects, Polygon, is returned by DetectDocumentText. Polygon represents a fine-grained polygon around detected text. For more information, see Geometry in the Amazon Textract Developer Guide.

The bounding box around the detected page, text, key-value pair, table, table cell, or selection element on a document page. The left (x-coordinate) and top (y-coordinate) are coordinates that represent the top and left sides of the bounding box. Note that the upper-left corner of the image is the origin (0,0). The top and left values returned are ratios of the overall document page size. For example, if the input image is 700 x 200 pixels, and the top-left coordinate of the bounding box is 350 x 50 pixels, the API returns a left value of 0.5 (350/700) and a top value of 0.25 (50/200). The width and height values represent the dimensions of the bounding box as a ratio of the overall document page dimension. For example, if the document page size is 700 x 200 pixels, and the bounding box width is 70 pixels, the width returned is 0.1.

Information about where the following items are located on a document page: detected page, text, key-value pairs, tables, table cells, and selection elements.

Shows the group that a certain key belongs to. This helps differentiate between names and addresses for different organizations, that can be hard to determine via JSON response.

Returns the kind of currency detected.

An object used to store information about the Value or Label detected by Amazon Textract.

An object used to store information about the Type detected by Amazon Textract.

Breakdown of detected information, seperated into the catagories Type, LabelDetection, and ValueDetection

Information about how blocks are related to each other. A Block object contains 0 or more Relation objects in a list, Relationships. For more information, see Block. The Type element provides the type of the relationship for all blocks in the IDs array.

A structure that holds information about the different lines found in a document's tables.

Contains information relating to dates in a document, including the type of value, and the value.

The results extracted for a lending document.

Each query contains the question you want to ask in the Text and the alias you want to associate.

Used to contain the information detected by an AnalyzeID operation.

A Block represents items that are recognized in a document within a group of pixels close to each other. The information returned in a Block object depends on the type of operation. In text detection for documents (for example DetectDocumentText), you get information about the detected words and lines of text. In text analysis (for example AnalyzeDocument), you can also get information about the fields, tables, and selection elements that are detected in the document. An array of Block objects is returned by both synchronous and asynchronous operations. In synchronous operations, such as DetectDocumentText, the array of Block objects is the entire set of results. In asynchronous operations, such as GetDocumentAnalysis, the array is returned over one or more responses. For more information, see How Amazon Textract Works.

A grouping of tables which contain LineItems, with each table identified by the table's LineItemGroupIndex.

Structure containing both the normalized type of the extracted information and the text associated with it. These are extracted as Type and Value respectively.

Holds the normalized key-value pairs returned by AnalyzeDocument, including the document type, detected text, and geometry.

Information regarding a detected signature on a page.

A structure that holds information regarding a detected signature on a page.

Contains information about the pages of a document, defined by logical boundary.

A structure containing information about an undetected signature on a page where it was expected but not found.

The structure holding all the information returned by AnalyzeExpense

The structure that lists each document processed in an AnalyzeID operation.

Holds the structured data returned by AnalyzeDocument for lending documents.

Contains information regarding predicted values returned by Amazon Textract operations, including the predicted value and the confidence in the predicted value.

Contains information extracted by an analysis operation after using StartLendingAnalysis.

An adapter selected for use when analyzing documents. Contains an adapter ID and a version number. Contains information on pages selected for analysis when analyzing documents asychronously.

Summary information about documents grouped by the same document type.

The class assigned to a Page object detected in an input document. Contains information regarding the predicted type/class of a document's page and the page number that the Page object was detected on.

The evaluation metrics (F1 score, Precision, and Recall) for an adapter version.

The S3 bucket name and file name that identifies the document. The AWS Region for the S3 bucket that contains the document must match the Region that you use for Amazon Textract operations. For Amazon Textract to process a file in an S3 bucket, the user must have permission to access the S3 bucket and file.

Contains information on the adapter, including the adapter ID, Name, Creation time, and feature types.

Summary info for an adapter version. Contains information on the AdapterId, AdapterVersion, CreationTime, FeatureTypes, and Status.

A warning about an issue that occurred during asynchronous text analysis (StartDocumentAnalysis) or asynchronous document text detection (StartDocumentTextDetection).

Contains the detections for each page analyzed through the Analyze Lending API.

Contains information on the metrics used to evalute the peformance of a given adapter version. Includes data for baseline model performance and individual adapter version perfromance.

The input document, either as bytes or as an S3 object. You pass image bytes to an Amazon Textract API operation by using the Bytes property. For example, you would use the Bytes property to pass a document loaded from a local file system. Image bytes passed by using the Bytes property must be base64 encoded. Your code might not need to encode document file bytes if you're using an AWS SDK to call Amazon Textract API operations. You pass images stored in an S3 bucket to an Amazon Textract API operation by using the S3Object property. Documents stored in an S3 bucket don't need to be base64 encoded. The AWS Region for the S3 bucket that contains the S3 object must match the AWS Region that you use for Amazon Textract operations. If you use the AWS CLI to call Amazon Textract operations, passing image bytes using the Bytes property isn't supported. You must first upload the document to an Amazon S3 bucket, and then call the operation using the S3Object property. For Amazon Textract to process an S3 object, the user must have permission to access the S3 object.

Allows you to set attributes of the image. Currently, you can declare an image as free of personally identifiable information and adult content.

You aren't authorized to perform the action. Use the Amazon Resource Name (ARN) of an authorized user or IAM role to perform the operation.

Updating or deleting a resource can cause an inconsistent state.

Amazon Textract experienced a service issue. Try your call again.

An input parameter violated a constraint. For example, in synchronous operations, an InvalidParameterException exception occurs when neither of the S3Object or Bytes values are supplied in the Document request parameter. Validate your parameter before calling the API operation again.

The number of requests exceeded your throughput limit. If you want to increase this limit, contact Amazon Textract.

Returned when an operation tried to access a nonexistent resource.

Amazon Textract is temporarily unable to process the request. Try your call again.

Indicates that a request was not valid. Check request for proper formatting.

Returned when a request cannot be completed as it would exceed a maximum service quota.

Amazon Textract isn't able to read the document. For more information on the document limits in Amazon Textract, see limits.

The document can't be processed because it's too large. The maximum document size for synchronous operations 10 MB. The maximum document size for asynchronous operations is 500 MB for PDF files.

A ClientRequestToken input parameter was reused with an operation, but at least one of the other input parameters is different from the previous call to the operation.

Indicates you do not have decrypt permissions with the KMS key entered, or the KMS key was entered incorrectly.

Amazon Textract is unable to access the S3 object that's specified in the request. for more information, Configure Access to Amazon S3 For troubleshooting information, see Troubleshooting Amazon S3

An Amazon Textract service limit was exceeded. For example, if you start too many asynchronous jobs concurrently, calls to start operations (StartDocumentTextDetection, for example) raise a LimitExceededException exception (HTTP status code: 400) until the number of concurrently running jobs is below the Amazon Textract service limit.

The format of the input document isn't supported. Documents for operations can be in PNG, JPEG, PDF, or TIFF format.

The Amazon S3 bucket that contains the document to be processed. It's used by asynchronous operations. The input document can be an image file in JPEG or PNG format. It can also be a file in PDF format.

The Amazon Simple Notification Service (Amazon SNS) topic to which Amazon Textract publishes the completion status of an asynchronous document operation.

Sets whether or not your output will go to a user created bucket. Used to set the name of the bucket, and the prefix on the output file. OutputConfig is an optional parameter which lets you adjust where your output will be placed. By default, Amazon Textract will store the results internally and can only be accessed by the Get API operations. With OutputConfig enabled, you can set the name of the bucket the output will be sent to the file prefix of the results where you can download your results. Additionally, you can set the KMSKeyID parameter to a customer master key (CMK) to encrypt your output. Without this parameter set Amazon Textract will encrypt server-side using the AWS managed CMK for Amazon S3. Decryption of Customer Content is necessary for processing of the documents by Amazon Textract. If your account is opted out under an AI services opt out policy then all unencrypted Customer Content is immediately and permanently deleted after the Customer Content has been processed by the service. No copy of of the output is retained by Amazon Textract. For information about how to opt out, see Managing AI services opt-out policy. For more information on data privacy, see the Data Privacy FAQ.

Contains information about adapters used when analyzing a document, with each adapter specified using an AdapterId and version

Information about the input document.

An invalid job identifier was passed to an asynchronous analysis operation.

Contains information regarding DocumentGroups and UndetectedDocumentTypes.

The dataset configuration options for a given version of an adapter. Can include an Amazon S3 bucket if specified.

Shows the results of the human in the loop evaluation. If there is no HumanLoopArn, the input did not trigger human review.

Indicates you have exceeded the maximum number of active human in the loop workflows available

Sets up the human review workflow the document will be sent to if one of the conditions is met. You can also set certain attributes of the image before review.

Update the configuration for an adapter. FeatureTypes configurations cannot be updated. At least one new parameter must be specified as an argument.

Update the configuration for an adapter. FeatureTypes configurations cannot be updated. At least one new parameter must be specified as an argument.

Removes any tags with the specified keys from the specified resource.

Removes any tags with the specified keys from the specified resource.

Adds one or more tags to the specified resource.

Adds one or more tags to the specified resource.

Starts the classification and analysis of an input document. StartLendingAnalysis initiates the classification and analysis of a packet of lending documents. StartLendingAnalysis operates on a document file located in an Amazon S3 bucket. StartLendingAnalysis can analyze text in documents that are in one of the following formats: JPEG, PNG, TIFF, PDF. Use DocumentLocation to specify the bucket name and the file name of the document. StartLendingAnalysis returns a job identifier (JobId) that you use to get the results of the operation. When the text analysis is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you specify in NotificationChannel. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If the status is SUCCEEDED you can call either GetLendingAnalysis or GetLendingAnalysisSummary and provide the JobId to obtain the results of the analysis. If using OutputConfig to specify an Amazon S3 bucket, the output will be contained within the specified prefix in a directory labeled with the job-id. In the directory there are 3 sub-directories: detailedResponse (contains the GetLendingAnalysis response) summaryResponse (for the GetLendingAnalysisSummary response) splitDocuments (documents split across logical boundaries)

Starts the classification and analysis of an input document. StartLendingAnalysis initiates the classification and analysis of a packet of lending documents. StartLendingAnalysis operates on a document file located in an Amazon S3 bucket. StartLendingAnalysis can analyze text in documents that are in one of the following formats: JPEG, PNG, TIFF, PDF. Use DocumentLocation to specify the bucket name and the file name of the document. StartLendingAnalysis returns a job identifier (JobId) that you use to get the results of the operation. When the text analysis is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you specify in NotificationChannel. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If the status is SUCCEEDED you can call either GetLendingAnalysis or GetLendingAnalysisSummary and provide the JobId to obtain the results of the analysis. If using OutputConfig to specify an Amazon S3 bucket, the output will be contained within the specified prefix in a directory labeled with the job-id. In the directory there are 3 sub-directories: detailedResponse (contains the GetLendingAnalysis response) summaryResponse (for the GetLendingAnalysisSummary response) splitDocuments (documents split across logical boundaries)

Starts the asynchronous analysis of invoices or receipts for data like contact information, items purchased, and vendor names. StartExpenseAnalysis can analyze text in documents that are in JPEG, PNG, and PDF format. The documents must be stored in an Amazon S3 bucket. Use the DocumentLocation parameter to specify the name of your S3 bucket and the name of the document in that bucket. StartExpenseAnalysis returns a job identifier (JobId) that you will provide to GetExpenseAnalysis to retrieve the results of the operation. When the analysis of the input invoices/receipts is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you provide to the NotificationChannel. To obtain the results of the invoice and receipt analysis operation, ensure that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetExpenseAnalysis, and pass the job identifier (JobId) that was returned by your call to StartExpenseAnalysis. For more information, see Analyzing Invoices and Receipts.

Starts the asynchronous analysis of invoices or receipts for data like contact information, items purchased, and vendor names. StartExpenseAnalysis can analyze text in documents that are in JPEG, PNG, and PDF format. The documents must be stored in an Amazon S3 bucket. Use the DocumentLocation parameter to specify the name of your S3 bucket and the name of the document in that bucket. StartExpenseAnalysis returns a job identifier (JobId) that you will provide to GetExpenseAnalysis to retrieve the results of the operation. When the analysis of the input invoices/receipts is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you provide to the NotificationChannel. To obtain the results of the invoice and receipt analysis operation, ensure that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetExpenseAnalysis, and pass the job identifier (JobId) that was returned by your call to StartExpenseAnalysis. For more information, see Analyzing Invoices and Receipts.

Starts the asynchronous detection of text in a document. Amazon Textract can detect lines of text and the words that make up a line of text. StartDocumentTextDetection can analyze text in documents that are in JPEG, PNG, TIFF, and PDF format. The documents are stored in an Amazon S3 bucket. Use DocumentLocation to specify the bucket name and file name of the document. StartDocumentTextDetection returns a job identifier (JobId) that you use to get the results of the operation. When text detection is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you specify in NotificationChannel. To get the results of the text detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentTextDetection, and pass the job identifier (JobId) from the initial call to StartDocumentTextDetection. For more information, see Document Text Detection.

Starts the asynchronous detection of text in a document. Amazon Textract can detect lines of text and the words that make up a line of text. StartDocumentTextDetection can analyze text in documents that are in JPEG, PNG, TIFF, and PDF format. The documents are stored in an Amazon S3 bucket. Use DocumentLocation to specify the bucket name and file name of the document. StartDocumentTextDetection returns a job identifier (JobId) that you use to get the results of the operation. When text detection is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you specify in NotificationChannel. To get the results of the text detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentTextDetection, and pass the job identifier (JobId) from the initial call to StartDocumentTextDetection. For more information, see Document Text Detection.

Starts the asynchronous analysis of an input document for relationships between detected items such as key-value pairs, tables, and selection elements. StartDocumentAnalysis can analyze text in documents that are in JPEG, PNG, TIFF, and PDF format. The documents are stored in an Amazon S3 bucket. Use DocumentLocation to specify the bucket name and file name of the document. StartDocumentAnalysis returns a job identifier (JobId) that you use to get the results of the operation. When text analysis is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you specify in NotificationChannel. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentAnalysis, and pass the job identifier (JobId) from the initial call to StartDocumentAnalysis. For more information, see Document Text Analysis.

Starts the asynchronous analysis of an input document for relationships between detected items such as key-value pairs, tables, and selection elements. StartDocumentAnalysis can analyze text in documents that are in JPEG, PNG, TIFF, and PDF format. The documents are stored in an Amazon S3 bucket. Use DocumentLocation to specify the bucket name and file name of the document. StartDocumentAnalysis returns a job identifier (JobId) that you use to get the results of the operation. When text analysis is finished, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that you specify in NotificationChannel. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentAnalysis, and pass the job identifier (JobId) from the initial call to StartDocumentAnalysis. For more information, see Document Text Analysis.

Lists all tags for an Amazon Textract resource.

Lists all tags for an Amazon Textract resource.

Lists all adapters that match the specified filtration criteria.

Lists all adapters that match the specified filtration criteria.

List all version of an adapter that meet the specified filtration criteria.

List all version of an adapter that meet the specified filtration criteria.

Gets summarized results for the StartLendingAnalysis operation, which analyzes text in a lending document. The returned summary consists of information about documents grouped together by a common document type. Information like detected signatures, page numbers, and split documents is returned with respect to the type of grouped document. You start asynchronous text analysis by calling StartLendingAnalysis, which returns a job identifier (JobId). When the text analysis operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartLendingAnalysis. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetLendingAnalysisSummary, and pass the job identifier (JobId) from the initial call to StartLendingAnalysis.

Gets summarized results for the StartLendingAnalysis operation, which analyzes text in a lending document. The returned summary consists of information about documents grouped together by a common document type. Information like detected signatures, page numbers, and split documents is returned with respect to the type of grouped document. You start asynchronous text analysis by calling StartLendingAnalysis, which returns a job identifier (JobId). When the text analysis operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartLendingAnalysis. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetLendingAnalysisSummary, and pass the job identifier (JobId) from the initial call to StartLendingAnalysis.

Gets the results for an Amazon Textract asynchronous operation that analyzes text in a lending document. You start asynchronous text analysis by calling StartLendingAnalysis, which returns a job identifier (JobId). When the text analysis operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartLendingAnalysis. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetLendingAnalysis, and pass the job identifier (JobId) from the initial call to StartLendingAnalysis.

Gets the results for an Amazon Textract asynchronous operation that analyzes text in a lending document. You start asynchronous text analysis by calling StartLendingAnalysis, which returns a job identifier (JobId). When the text analysis operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartLendingAnalysis. To get the results of the text analysis operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetLendingAnalysis, and pass the job identifier (JobId) from the initial call to StartLendingAnalysis.

Gets the results for an Amazon Textract asynchronous operation that analyzes invoices and receipts. Amazon Textract finds contact information, items purchased, and vendor name, from input invoices and receipts. You start asynchronous invoice/receipt analysis by calling StartExpenseAnalysis, which returns a job identifier (JobId). Upon completion of the invoice/receipt analysis, Amazon Textract publishes the completion status to the Amazon Simple Notification Service (Amazon SNS) topic. This topic must be registered in the initial call to StartExpenseAnalysis. To get the results of the invoice/receipt analysis operation, first ensure that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetExpenseAnalysis, and pass the job identifier (JobId) from the initial call to StartExpenseAnalysis. Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetExpenseAnalysis, and populate the NextToken request parameter with the token value that's returned from the previous call to GetExpenseAnalysis. For more information, see Analyzing Invoices and Receipts.

Gets the results for an Amazon Textract asynchronous operation that analyzes invoices and receipts. Amazon Textract finds contact information, items purchased, and vendor name, from input invoices and receipts. You start asynchronous invoice/receipt analysis by calling StartExpenseAnalysis, which returns a job identifier (JobId). Upon completion of the invoice/receipt analysis, Amazon Textract publishes the completion status to the Amazon Simple Notification Service (Amazon SNS) topic. This topic must be registered in the initial call to StartExpenseAnalysis. To get the results of the invoice/receipt analysis operation, first ensure that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetExpenseAnalysis, and pass the job identifier (JobId) from the initial call to StartExpenseAnalysis. Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetExpenseAnalysis, and populate the NextToken request parameter with the token value that's returned from the previous call to GetExpenseAnalysis. For more information, see Analyzing Invoices and Receipts.

Gets the results for an Amazon Textract asynchronous operation that detects text in a document. Amazon Textract can detect lines of text and the words that make up a line of text. You start asynchronous text detection by calling StartDocumentTextDetection, which returns a job identifier (JobId). When the text detection operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartDocumentTextDetection. To get the results of the text-detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentTextDetection, and pass the job identifier (JobId) from the initial call to StartDocumentTextDetection. GetDocumentTextDetection returns an array of Block objects. Each document page has as an associated Block of type PAGE. Each PAGE Block object is the parent of LINE Block objects that represent the lines of detected text on a page. A LINE Block object is a parent for each word that makes up the line. Words are represented by Block objects of type WORD. Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetDocumentTextDetection, and populate the NextToken request parameter with the token value that's returned from the previous call to GetDocumentTextDetection. For more information, see Document Text Detection.

Gets the results for an Amazon Textract asynchronous operation that detects text in a document. Amazon Textract can detect lines of text and the words that make up a line of text. You start asynchronous text detection by calling StartDocumentTextDetection, which returns a job identifier (JobId). When the text detection operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartDocumentTextDetection. To get the results of the text-detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentTextDetection, and pass the job identifier (JobId) from the initial call to StartDocumentTextDetection. GetDocumentTextDetection returns an array of Block objects. Each document page has as an associated Block of type PAGE. Each PAGE Block object is the parent of LINE Block objects that represent the lines of detected text on a page. A LINE Block object is a parent for each word that makes up the line. Words are represented by Block objects of type WORD. Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetDocumentTextDetection, and populate the NextToken request parameter with the token value that's returned from the previous call to GetDocumentTextDetection. For more information, see Document Text Detection.

Gets the results for an Amazon Textract asynchronous operation that analyzes text in a document. You start asynchronous text analysis by calling StartDocumentAnalysis, which returns a job identifier (JobId). When the text analysis operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartDocumentAnalysis. To get the results of the text-detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentAnalysis, and pass the job identifier (JobId) from the initial call to StartDocumentAnalysis. GetDocumentAnalysis returns an array of Block objects. The following types of information are returned: Form data (key-value pairs). The related information is returned in two Block objects, each of type KEY_VALUE_SET: a KEY Block object and a VALUE Block object. For example, Name: Ana Silva Carolina contains a key and value. Name: is the key. Ana Silva Carolina is the value. Table and table cell data. A TABLE Block object contains information about a detected table. A CELL Block object is returned for each cell in a table. Lines and words of text. A LINE Block object contains one or more WORD Block objects. All lines and words that are detected in the document are returned (including text that doesn't have a relationship with the value of the StartDocumentAnalysis FeatureTypes input parameter). Query. A QUERY Block object contains the query text, alias and link to the associated Query results block object. Query Results. A QUERY_RESULT Block object contains the answer to the query and an ID that connects it to the query asked. This Block also contains a confidence score. While processing a document with queries, look out for INVALID_REQUEST_PARAMETERS output. This indicates that either the per page query limit has been exceeded or that the operation is trying to query a page in the document which doesn’t exist. Selection elements such as check boxes and option buttons (radio buttons) can be detected in form data and in tables. A SELECTION_ELEMENT Block object contains information about a selection element, including the selection status. Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetDocumentAnalysis, and populate the NextToken request parameter with the token value that's returned from the previous call to GetDocumentAnalysis. For more information, see Document Text Analysis.

Gets the results for an Amazon Textract asynchronous operation that analyzes text in a document. You start asynchronous text analysis by calling StartDocumentAnalysis, which returns a job identifier (JobId). When the text analysis operation finishes, Amazon Textract publishes a completion status to the Amazon Simple Notification Service (Amazon SNS) topic that's registered in the initial call to StartDocumentAnalysis. To get the results of the text-detection operation, first check that the status value published to the Amazon SNS topic is SUCCEEDED. If so, call GetDocumentAnalysis, and pass the job identifier (JobId) from the initial call to StartDocumentAnalysis. GetDocumentAnalysis returns an array of Block objects. The following types of information are returned: Form data (key-value pairs). The related information is returned in two Block objects, each of type KEY_VALUE_SET: a KEY Block object and a VALUE Block object. For example, Name: Ana Silva Carolina contains a key and value. Name: is the key. Ana Silva Carolina is the value. Table and table cell data. A TABLE Block object contains information about a detected table. A CELL Block object is returned for each cell in a table. Lines and words of text. A LINE Block object contains one or more WORD Block objects. All lines and words that are detected in the document are returned (including text that doesn't have a relationship with the value of the StartDocumentAnalysis FeatureTypes input parameter). Query. A QUERY Block object contains the query text, alias and link to the associated Query results block object. Query Results. A QUERY_RESULT Block object contains the answer to the query and an ID that connects it to the query asked. This Block also contains a confidence score. While processing a document with queries, look out for INVALID_REQUEST_PARAMETERS output. This indicates that either the per page query limit has been exceeded or that the operation is trying to query a page in the document which doesn’t exist. Selection elements such as check boxes and option buttons (radio buttons) can be detected in form data and in tables. A SELECTION_ELEMENT Block object contains information about a selection element, including the selection status. Use the MaxResults parameter to limit the number of blocks that are returned. If there are more results than specified in MaxResults, the value of NextToken in the operation response contains a pagination token for getting the next set of results. To get the next page of results, call GetDocumentAnalysis, and populate the NextToken request parameter with the token value that's returned from the previous call to GetDocumentAnalysis. For more information, see Document Text Analysis.

Gets configuration information for the specified adapter version, including: AdapterId, AdapterVersion, FeatureTypes, Status, StatusMessage, DatasetConfig, KMSKeyId, OutputConfig, Tags and EvaluationMetrics.

Gets configuration information for the specified adapter version, including: AdapterId, AdapterVersion, FeatureTypes, Status, StatusMessage, DatasetConfig, KMSKeyId, OutputConfig, Tags and EvaluationMetrics.

Gets configuration information for an adapter specified by an AdapterId, returning information on AdapterName, Description, CreationTime, AutoUpdate status, and FeatureTypes.

Gets configuration information for an adapter specified by an AdapterId, returning information on AdapterName, Description, CreationTime, AutoUpdate status, and FeatureTypes.

Detects text in the input document. Amazon Textract can detect lines of text and the words that make up a line of text. The input document must be in one of the following image formats: JPEG, PNG, PDF, or TIFF. DetectDocumentText returns the detected text in an array of Block objects. Each document page has as an associated Block of type PAGE. Each PAGE Block object is the parent of LINE Block objects that represent the lines of detected text on a page. A LINE Block object is a parent for each word that makes up the line. Words are represented by Block objects of type WORD. DetectDocumentText is a synchronous operation. To analyze documents asynchronously, use StartDocumentTextDetection. For more information, see Document Text Detection.

Detects text in the input document. Amazon Textract can detect lines of text and the words that make up a line of text. The input document must be in one of the following image formats: JPEG, PNG, PDF, or TIFF. DetectDocumentText returns the detected text in an array of Block objects. Each document page has as an associated Block of type PAGE. Each PAGE Block object is the parent of LINE Block objects that represent the lines of detected text on a page. A LINE Block object is a parent for each word that makes up the line. Words are represented by Block objects of type WORD. DetectDocumentText is a synchronous operation. To analyze documents asynchronously, use StartDocumentTextDetection. For more information, see Document Text Detection.

Deletes an Amazon Textract adapter version. Requires that you specify both an AdapterId and a AdapterVersion. Deletes the adapter version specified by the AdapterId and the AdapterVersion.

Deletes an Amazon Textract adapter version. Requires that you specify both an AdapterId and a AdapterVersion. Deletes the adapter version specified by the AdapterId and the AdapterVersion.

Deletes an Amazon Textract adapter. Takes an AdapterId and deletes the adapter specified by the ID.

Deletes an Amazon Textract adapter. Takes an AdapterId and deletes the adapter specified by the ID.

Creates a new version of an adapter. Operates on a provided AdapterId and a specified dataset provided via the DatasetConfig argument. Requires that you specify an Amazon S3 bucket with the OutputConfig argument. You can provide an optional KMSKeyId, an optional ClientRequestToken, and optional tags.

Creates a new version of an adapter. Operates on a provided AdapterId and a specified dataset provided via the DatasetConfig argument. Requires that you specify an Amazon S3 bucket with the OutputConfig argument. You can provide an optional KMSKeyId, an optional ClientRequestToken, and optional tags.

Creates an adapter, which can be fine-tuned for enhanced performance on user provided documents. Takes an AdapterName and FeatureType. Currently the only supported feature type is QUERIES. You can also provide a Description, Tags, and a ClientRequestToken. You can choose whether or not the adapter should be AutoUpdated with the AutoUpdate argument. By default, AutoUpdate is set to DISABLED.

Creates an adapter, which can be fine-tuned for enhanced performance on user provided documents. Takes an AdapterName and FeatureType. Currently the only supported feature type is QUERIES. You can also provide a Description, Tags, and a ClientRequestToken. You can choose whether or not the adapter should be AutoUpdated with the AutoUpdate argument. By default, AutoUpdate is set to DISABLED.

Analyzes identity documents for relevant information. This information is extracted and returned as IdentityDocumentFields, which records both the normalized field and value of the extracted text. Unlike other Amazon Textract operations, AnalyzeID doesn't return any Geometry data.

Analyzes identity documents for relevant information. This information is extracted and returned as IdentityDocumentFields, which records both the normalized field and value of the extracted text. Unlike other Amazon Textract operations, AnalyzeID doesn't return any Geometry data.

AnalyzeExpense synchronously analyzes an input document for financially related relationships between text. Information is returned as ExpenseDocuments and seperated as follows: LineItemGroups- A data set containing LineItems which store information about the lines of text, such as an item purchased and its price on a receipt. SummaryFields- Contains all other information a receipt, such as header information or the vendors name.

AnalyzeExpense synchronously analyzes an input document for financially related relationships between text. Information is returned as ExpenseDocuments and seperated as follows: LineItemGroups- A data set containing LineItems which store information about the lines of text, such as an item purchased and its price on a receipt. SummaryFields- Contains all other information a receipt, such as header information or the vendors name.

Analyzes an input document for relationships between detected items. The types of information returned are as follows: Form data (key-value pairs). The related information is returned in two Block objects, each of type KEY_VALUE_SET: a KEY Block object and a VALUE Block object. For example, Name: Ana Silva Carolina contains a key and value. Name: is the key. Ana Silva Carolina is the value. Table and table cell data. A TABLE Block object contains information about a detected table. A CELL Block object is returned for each cell in a table. Lines and words of text. A LINE Block object contains one or more WORD Block objects. All lines and words that are detected in the document are returned (including text that doesn't have a relationship with the value of FeatureTypes). Signatures. A SIGNATURE Block object contains the location information of a signature in a document. If used in conjunction with forms or tables, a signature can be given a Key-Value pairing or be detected in the cell of a table. Query. A QUERY Block object contains the query text, alias and link to the associated Query results block object. Query Result. A QUERY_RESULT Block object contains the answer to the query and an ID that connects it to the query asked. This Block also contains a confidence score. Selection elements such as check boxes and option buttons (radio buttons) can be detected in form data and in tables. A SELECTION_ELEMENT Block object contains information about a selection element, including the selection status. You can choose which type of analysis to perform by specifying the FeatureTypes list. The output is returned in a list of Block objects. AnalyzeDocument is a synchronous operation. To analyze documents asynchronously, use StartDocumentAnalysis. For more information, see Document Text Analysis.

Analyzes an input document for relationships between detected items. The types of information returned are as follows: Form data (key-value pairs). The related information is returned in two Block objects, each of type KEY_VALUE_SET: a KEY Block object and a VALUE Block object. For example, Name: Ana Silva Carolina contains a key and value. Name: is the key. Ana Silva Carolina is the value. Table and table cell data. A TABLE Block object contains information about a detected table. A CELL Block object is returned for each cell in a table. Lines and words of text. A LINE Block object contains one or more WORD Block objects. All lines and words that are detected in the document are returned (including text that doesn't have a relationship with the value of FeatureTypes). Signatures. A SIGNATURE Block object contains the location information of a signature in a document. If used in conjunction with forms or tables, a signature can be given a Key-Value pairing or be detected in the cell of a table. Query. A QUERY Block object contains the query text, alias and link to the associated Query results block object. Query Result. A QUERY_RESULT Block object contains the answer to the query and an ID that connects it to the query asked. This Block also contains a confidence score. Selection elements such as check boxes and option buttons (radio buttons) can be detected in form data and in tables. A SELECTION_ELEMENT Block object contains information about a selection element, including the selection status. You can choose which type of analysis to perform by specifying the FeatureTypes list. The output is returned in a list of Block objects. AnalyzeDocument is a synchronous operation. To analyze documents asynchronously, use StartDocumentAnalysis. For more information, see Document Text Analysis.