Module Awso_keyspaces_eioSource

The auto scaling policy that scales a table based on the ratio of consumed to provisioned capacity.

Amazon Keyspaces supports the target tracking auto scaling policy. With this policy, Amazon Keyspaces auto scaling ensures that the table's ratio of consumed to provisioned capacity stays at or near the target value that you specify. You define the target value as a percentage between 20 and 90.

The optional auto scaling settings for a table with provisioned throughput capacity. To turn on auto scaling for a table in throughputMode:PROVISIONED, you must specify the following parameters. Configure the minimum and maximum capacity units. The auto scaling policy ensures that capacity never goes below the minimum or above the maximum range. minimumUnits: The minimum level of throughput the table should always be ready to support. The value must be between 1 and the max throughput per second quota for your account (40,000 by default). maximumUnits: The maximum level of throughput the table should always be ready to support. The value must be between 1 and the max throughput per second quota for your account (40,000 by default). scalingPolicy: Amazon Keyspaces supports the target tracking scaling policy. The auto scaling target is the provisioned capacity of the table. targetTrackingScalingPolicyConfiguration: To define the target tracking policy, you must define the target value. targetValue: The target utilization rate of the table. Amazon Keyspaces auto scaling ensures that the ratio of consumed capacity to provisioned capacity stays at or near this value. You define targetValue as a percentage. A double between 20 and 90. (Required) disableScaleIn: A boolean that specifies if scale-in is disabled or enabled for the table. This parameter is disabled by default. To turn on scale-in, set the boolean value to FALSE. This means that capacity for a table can be automatically scaled down on your behalf. (Optional) scaleInCooldown: A cooldown period in seconds between scaling activities that lets the table stabilize before another scale in activity starts. If no value is provided, the default is 0. (Optional) scaleOutCooldown: A cooldown period in seconds between scaling activities that lets the table stabilize before another scale out activity starts. If no value is provided, the default is 0. (Optional) For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide.

Describes a tag. A tag is a key-value pair. You can add up to 50 tags to a single Amazon Keyspaces resource. Amazon Web Services-assigned tag names and values are automatically assigned the aws: prefix, which the user cannot assign. Amazon Web Services-assigned tag names do not count towards the tag limit of 50. User-assigned tag names have the prefix user: in the Cost Allocation Report. You cannot backdate the application of a tag. For more information, see Adding tags and labels to Amazon Keyspaces resources in the Amazon Keyspaces Developer Guide.

The read/write throughput capacity mode for a table. The options are: throughputMode:PAY_PER_REQUEST and throughputMode:PROVISIONED. For more information, see Read/write capacity modes in the Amazon Keyspaces Developer Guide.

Contains the current warm throughput settings for a table, including the configured capacity units and the current status of the warm throughput configuration.

The optional clustering column portion of your primary key determines how the data is clustered and sorted within each partition.

The names and data types of regular columns.

The partition key portion of the primary key is required and determines how Amazon Keyspaces stores the data. The partition key can be a single column, or it can be a compound value composed of two or more columns.

The static columns of the table. Static columns store values that are shared by all rows in the same partition.

The optional auto scaling capacity settings for a table in provisioned capacity mode.

The Amazon Web Services Region specific settings of a multi-Region table. For a multi-Region table, you can configure the table's read capacity differently per Amazon Web Services Region. You can do this by configuring the following parameters. region: The Region where these settings are applied. (Required) readCapacityUnits: The provisioned read capacity units. (Optional) readCapacityAutoScaling: The read capacity auto scaling settings for the table. (Optional)

Returns the name of the specified table, the keyspace it is stored in, and the unique identifier in the format of an Amazon Resource Name (ARN).

Represents the properties of a keyspace.

A field definition consists out of a name and a type.

The Region-specific settings of a multi-Region table in the specified Amazon Web Services Region. If the multi-Region table is using provisioned capacity and has optional auto scaling policies configured, note that the Region specific summary returns both read and write capacity settings. But only Region specific read capacity settings can be configured for a multi-Region table. In a multi-Region table, your write capacity units will be synced across all Amazon Web Services Regions to ensure that there is enough capacity to replicate write events across Regions.

The auto scaling settings of a multi-Region table in the specified Amazon Web Services Region.

This shows the summary status of the keyspace after a new Amazon Web Services Region was added.

You don't have sufficient access permissions to perform this action.

Amazon Keyspaces couldn't complete the requested action. This error may occur if you try to perform an action and the same or a different action is already in progress, or if you try to create a resource that already exists.

Amazon Keyspaces was unable to fully process this request because of an internal server error.

The operation tried to access a keyspace, table, or type that doesn't exist. The resource might not be specified correctly, or its status might not be ACTIVE.

The operation exceeded the service quota for this resource. For more information on service quotas, see Quotas in the Amazon Keyspaces Developer Guide.

The operation failed due to an invalid or malformed request.

Amazon Keyspaces has two read/write capacity modes for processing reads and writes on your tables: On-demand (default) Provisioned The read/write capacity mode that you choose controls how you are charged for read and write throughput and how table throughput capacity is managed. For more information, see Read/write capacity modes in the Amazon Keyspaces Developer Guide.

The settings for the CDC stream of a table. For more information about CDC streams, see Working with change data capture (CDC) streams in Amazon Keyspaces in the Amazon Keyspaces Developer Guide.

The client-side timestamp setting of the table. For more information, see How it works: Amazon Keyspaces client-side timestamps in the Amazon Keyspaces Developer Guide.

Amazon Keyspaces encrypts and decrypts the table data at rest transparently and integrates with Key Management Service for storing and managing the encryption key. You can choose one of the following KMS keys (KMS keys): Amazon Web Services owned key - This is the default encryption type. The key is owned by Amazon Keyspaces (no additional charge). Customer managed key - This key is stored in your account and is created, owned, and managed by you. You have full control over the customer managed key (KMS charges apply). For more information about encryption at rest in Amazon Keyspaces, see Encryption at rest in the Amazon Keyspaces Developer Guide. For more information about KMS, see KMS management service concepts in the Key Management Service Developer Guide.

Point-in-time recovery (PITR) helps protect your Amazon Keyspaces tables from accidental write or delete operations by providing you continuous backups of your table data. For more information, see Point-in-time recovery in the Amazon Keyspaces Developer Guide.

Enable custom Time to Live (TTL) settings for rows and columns without setting a TTL default for the specified table. For more information, see Enabling TTL on tables in the Amazon Keyspaces Developer Guide.

Specifies the warm throughput settings for a table. Pre-warming a table by specifying warm throughput pre-provisions read and write capacity units to help avoid capacity exceeded exceptions and reduce latency when your table starts receiving traffic. For more information about pre-warming in Amazon Keyspaces, see Pre-warm a table in Amazon Keyspaces in the Amazon Keyspaces Developer Guide.

The replication specification of the keyspace includes: regionList - the Amazon Web Services Regions where the keyspace is replicated in. replicationStrategy - the required value is SINGLE_REGION or MULTI_REGION.

The settings of the CDC stream of the table. For more information about CDC streams, see Working with change data capture (CDC) streams in Amazon Keyspaces in the Amazon Keyspaces Developer Guide.

An optional comment that describes the table.

The point-in-time recovery status of the specified table.

Describes the schema of the table.

Adds new columns to the table or updates one of the table's settings, for example capacity mode, auto scaling, encryption, point-in-time recovery, or ttl settings. Note that you can only update one specific table setting per update operation.

Adds new columns to the table or updates one of the table's settings, for example capacity mode, auto scaling, encryption, point-in-time recovery, or ttl settings. Note that you can only update one specific table setting per update operation.

Adds a new Amazon Web Services Region to the keyspace. You can add a new Region to a keyspace that is either a single or a multi-Region keyspace. Amazon Keyspaces is going to replicate all tables in the keyspace to the new Region. To successfully replicate all tables to the new Region, they must use client-side timestamps for conflict resolution. To enable client-side timestamps, specify clientSideTimestamps.status = enabled when invoking the API. For more information about client-side timestamps, see Client-side timestamps in Amazon Keyspaces in the Amazon Keyspaces Developer Guide. To add a Region to a keyspace using the UpdateKeyspace API, the IAM principal needs permissions for the following IAM actions: cassandra:Alter cassandra:AlterMultiRegionResource cassandra:Create cassandra:CreateMultiRegionResource cassandra:Select cassandra:SelectMultiRegionResource cassandra:Modify cassandra:ModifyMultiRegionResource If the keyspace contains a table that is configured in provisioned mode with auto scaling enabled, the following additional IAM actions need to be allowed. application-autoscaling:RegisterScalableTarget application-autoscaling:DeregisterScalableTarget application-autoscaling:DescribeScalableTargets application-autoscaling:PutScalingPolicy application-autoscaling:DescribeScalingPolicies To use the UpdateKeyspace API, the IAM principal also needs permissions to create a service-linked role with the following elements: iam:CreateServiceLinkedRole - The action the principal can perform. arn:aws:iam::*:role/aws-service-role/replication.cassandra.amazonaws.com/AWSServiceRoleForKeyspacesReplication - The resource that the action can be performed on. iam:AWSServiceName: replication.cassandra.amazonaws.com - The only Amazon Web Services service that this role can be attached to is Amazon Keyspaces. For more information, see Configure the IAM permissions required to add an Amazon Web Services Region to a keyspace in the Amazon Keyspaces Developer Guide.

Adds a new Amazon Web Services Region to the keyspace. You can add a new Region to a keyspace that is either a single or a multi-Region keyspace. Amazon Keyspaces is going to replicate all tables in the keyspace to the new Region. To successfully replicate all tables to the new Region, they must use client-side timestamps for conflict resolution. To enable client-side timestamps, specify clientSideTimestamps.status = enabled when invoking the API. For more information about client-side timestamps, see Client-side timestamps in Amazon Keyspaces in the Amazon Keyspaces Developer Guide. To add a Region to a keyspace using the UpdateKeyspace API, the IAM principal needs permissions for the following IAM actions: cassandra:Alter cassandra:AlterMultiRegionResource cassandra:Create cassandra:CreateMultiRegionResource cassandra:Select cassandra:SelectMultiRegionResource cassandra:Modify cassandra:ModifyMultiRegionResource If the keyspace contains a table that is configured in provisioned mode with auto scaling enabled, the following additional IAM actions need to be allowed. application-autoscaling:RegisterScalableTarget application-autoscaling:DeregisterScalableTarget application-autoscaling:DescribeScalableTargets application-autoscaling:PutScalingPolicy application-autoscaling:DescribeScalingPolicies To use the UpdateKeyspace API, the IAM principal also needs permissions to create a service-linked role with the following elements: iam:CreateServiceLinkedRole - The action the principal can perform. arn:aws:iam::*:role/aws-service-role/replication.cassandra.amazonaws.com/AWSServiceRoleForKeyspacesReplication - The resource that the action can be performed on. iam:AWSServiceName: replication.cassandra.amazonaws.com - The only Amazon Web Services service that this role can be attached to is Amazon Keyspaces. For more information, see Configure the IAM permissions required to add an Amazon Web Services Region to a keyspace in the Amazon Keyspaces Developer Guide.

Removes the association of tags from a Amazon Keyspaces resource.

Removes the association of tags from a Amazon Keyspaces resource.

Associates a set of tags with a Amazon Keyspaces resource. You can then activate these user-defined tags so that they appear on the Cost Management Console for cost allocation tracking. For more information, see Adding tags and labels to Amazon Keyspaces resources in the Amazon Keyspaces Developer Guide. For IAM policy examples that show how to control access to Amazon Keyspaces resources based on tags, see Amazon Keyspaces resource access based on tags in the Amazon Keyspaces Developer Guide.

Associates a set of tags with a Amazon Keyspaces resource. You can then activate these user-defined tags so that they appear on the Cost Management Console for cost allocation tracking. For more information, see Adding tags and labels to Amazon Keyspaces resources in the Amazon Keyspaces Developer Guide. For IAM policy examples that show how to control access to Amazon Keyspaces resources based on tags, see Amazon Keyspaces resource access based on tags in the Amazon Keyspaces Developer Guide.

Restores the table to the specified point in time within the earliest_restorable_timestamp and the current time. For more information about restore points, see Time window for PITR continuous backups in the Amazon Keyspaces Developer Guide. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account. When you restore using point in time recovery, Amazon Keyspaces restores your source table's schema and data to the state based on the selected timestamp (day:hour:minute:second) to a new table. The Time to Live (TTL) settings are also restored to the state based on the selected timestamp. In addition to the table's schema, data, and TTL settings, RestoreTable restores the capacity mode, auto scaling settings, encryption settings, and point-in-time recovery settings from the source table. Unlike the table's schema data and TTL settings, which are restored based on the selected timestamp, these settings are always restored based on the table's settings as of the current time or when the table was deleted. You can also overwrite these settings during restore: Read/write capacity mode Provisioned throughput capacity units Auto scaling settings Point-in-time (PITR) settings Tags For more information, see PITR restore settings in the Amazon Keyspaces Developer Guide. Note that the following settings are not restored, and you must configure them manually for the new table: Identity and Access Management (IAM) policies Amazon CloudWatch metrics and alarms

Restores the table to the specified point in time within the earliest_restorable_timestamp and the current time. For more information about restore points, see Time window for PITR continuous backups in the Amazon Keyspaces Developer Guide. Any number of users can execute up to 4 concurrent restores (any type of restore) in a given account. When you restore using point in time recovery, Amazon Keyspaces restores your source table's schema and data to the state based on the selected timestamp (day:hour:minute:second) to a new table. The Time to Live (TTL) settings are also restored to the state based on the selected timestamp. In addition to the table's schema, data, and TTL settings, RestoreTable restores the capacity mode, auto scaling settings, encryption settings, and point-in-time recovery settings from the source table. Unlike the table's schema data and TTL settings, which are restored based on the selected timestamp, these settings are always restored based on the table's settings as of the current time or when the table was deleted. You can also overwrite these settings during restore: Read/write capacity mode Provisioned throughput capacity units Auto scaling settings Point-in-time (PITR) settings Tags For more information, see PITR restore settings in the Amazon Keyspaces Developer Guide. Note that the following settings are not restored, and you must configure them manually for the new table: Identity and Access Management (IAM) policies Amazon CloudWatch metrics and alarms

The ListTypes operation returns a list of types for a specified keyspace. To read keyspace metadata using ListTypes, the IAM principal needs Select action permissions for the system keyspace. To configure the required permissions, see Permissions to view a UDT in the Amazon Keyspaces Developer Guide.

The ListTypes operation returns a list of types for a specified keyspace. To read keyspace metadata using ListTypes, the IAM principal needs Select action permissions for the system keyspace. To configure the required permissions, see Permissions to view a UDT in the Amazon Keyspaces Developer Guide.

Returns a list of all tags associated with the specified Amazon Keyspaces resource. To read keyspace metadata using ListTagsForResource, the IAM principal needs Select action permissions for the specified resource and the system keyspace.

Returns a list of all tags associated with the specified Amazon Keyspaces resource. To read keyspace metadata using ListTagsForResource, the IAM principal needs Select action permissions for the specified resource and the system keyspace.

The ListTables operation returns a list of tables for a specified keyspace. To read keyspace metadata using ListTables, the IAM principal needs Select action permissions for the system keyspace.

The ListTables operation returns a list of tables for a specified keyspace. To read keyspace metadata using ListTables, the IAM principal needs Select action permissions for the system keyspace.

The ListKeyspaces operation returns a list of keyspaces.

The ListKeyspaces operation returns a list of keyspaces.

The GetType operation returns information about the type, for example the field definitions, the timestamp when the type was last modified, the level of nesting, the status, and details about if the type is used in other types and tables. To read keyspace metadata using GetType, the IAM principal needs Select action permissions for the system keyspace. To configure the required permissions, see Permissions to view a UDT in the Amazon Keyspaces Developer Guide.

The GetType operation returns information about the type, for example the field definitions, the timestamp when the type was last modified, the level of nesting, the status, and details about if the type is used in other types and tables. To read keyspace metadata using GetType, the IAM principal needs Select action permissions for the system keyspace. To configure the required permissions, see Permissions to view a UDT in the Amazon Keyspaces Developer Guide.

Returns information about the table, including the table's name and current status, the keyspace name, configuration settings, and metadata. To read table metadata using GetTable, the IAM principal needs Select action permissions for the table and the system keyspace.

Returns information about the table, including the table's name and current status, the keyspace name, configuration settings, and metadata. To read table metadata using GetTable, the IAM principal needs Select action permissions for the table and the system keyspace.

Returns auto scaling related settings of the specified table in JSON format. If the table is a multi-Region table, the Amazon Web Services Region specific auto scaling settings of the table are included. Amazon Keyspaces auto scaling helps you provision throughput capacity for variable workloads efficiently by increasing and decreasing your table's read and write capacity automatically in response to application traffic. For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide. GetTableAutoScalingSettings can't be used as an action in an IAM policy. To define permissions for GetTableAutoScalingSettings, you must allow the following two actions in the IAM policy statement's Action element: application-autoscaling:DescribeScalableTargets application-autoscaling:DescribeScalingPolicies

Returns auto scaling related settings of the specified table in JSON format. If the table is a multi-Region table, the Amazon Web Services Region specific auto scaling settings of the table are included. Amazon Keyspaces auto scaling helps you provision throughput capacity for variable workloads efficiently by increasing and decreasing your table's read and write capacity automatically in response to application traffic. For more information, see Managing throughput capacity automatically with Amazon Keyspaces auto scaling in the Amazon Keyspaces Developer Guide. GetTableAutoScalingSettings can't be used as an action in an IAM policy. To define permissions for GetTableAutoScalingSettings, you must allow the following two actions in the IAM policy statement's Action element: application-autoscaling:DescribeScalableTargets application-autoscaling:DescribeScalingPolicies

Returns the name of the specified keyspace, the Amazon Resource Name (ARN), the replication strategy, the Amazon Web Services Regions of a multi-Region keyspace, and the status of newly added Regions after an UpdateKeyspace operation.

Returns the name of the specified keyspace, the Amazon Resource Name (ARN), the replication strategy, the Amazon Web Services Regions of a multi-Region keyspace, and the status of newly added Regions after an UpdateKeyspace operation.

The DeleteType operation deletes a user-defined type (UDT). You can only delete a type that is not used in a table or another UDT. To configure the required permissions, see Permissions to delete a UDT in the Amazon Keyspaces Developer Guide.

The DeleteType operation deletes a user-defined type (UDT). You can only delete a type that is not used in a table or another UDT. To configure the required permissions, see Permissions to delete a UDT in the Amazon Keyspaces Developer Guide.

The DeleteTable operation deletes a table and all of its data. After a DeleteTable request is received, the specified table is in the DELETING state until Amazon Keyspaces completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is either in the CREATING or UPDATING states, then Amazon Keyspaces returns a ResourceInUseException. If the specified table does not exist, Amazon Keyspaces returns a ResourceNotFoundException. If the table is already in the DELETING state, no error is returned.

The DeleteTable operation deletes a table and all of its data. After a DeleteTable request is received, the specified table is in the DELETING state until Amazon Keyspaces completes the deletion. If the table is in the ACTIVE state, you can delete it. If a table is either in the CREATING or UPDATING states, then Amazon Keyspaces returns a ResourceInUseException. If the specified table does not exist, Amazon Keyspaces returns a ResourceNotFoundException. If the table is already in the DELETING state, no error is returned.

The DeleteKeyspace operation deletes a keyspace and all of its tables.

The DeleteKeyspace operation deletes a keyspace and all of its tables.

The CreateType operation creates a new user-defined type in the specified keyspace. To configure the required permissions, see Permissions to create a UDT in the Amazon Keyspaces Developer Guide. For more information, see User-defined types (UDTs) in the Amazon Keyspaces Developer Guide.

The CreateType operation creates a new user-defined type in the specified keyspace. To configure the required permissions, see Permissions to create a UDT in the Amazon Keyspaces Developer Guide. For more information, see User-defined types (UDTs) in the Amazon Keyspaces Developer Guide.

The CreateTable operation adds a new table to the specified keyspace. Within a keyspace, table names must be unique. CreateTable is an asynchronous operation. When the request is received, the status of the table is set to CREATING. You can monitor the creation status of the new table by using the GetTable operation, which returns the current status of the table. You can start using a table when the status is ACTIVE. For more information, see Create a table in the Amazon Keyspaces Developer Guide.

The CreateTable operation adds a new table to the specified keyspace. Within a keyspace, table names must be unique. CreateTable is an asynchronous operation. When the request is received, the status of the table is set to CREATING. You can monitor the creation status of the new table by using the GetTable operation, which returns the current status of the table. You can start using a table when the status is ACTIVE. For more information, see Create a table in the Amazon Keyspaces Developer Guide.

The CreateKeyspace operation adds a new keyspace to your account. In an Amazon Web Services account, keyspace names must be unique within each Region. CreateKeyspace is an asynchronous operation. You can monitor the creation status of the new keyspace by using the GetKeyspace operation. For more information, see Create a keyspace in the Amazon Keyspaces Developer Guide.

The CreateKeyspace operation adds a new keyspace to your account. In an Amazon Web Services account, keyspace names must be unique within each Region. CreateKeyspace is an asynchronous operation. You can monitor the creation status of the new keyspace by using the GetKeyspace operation. For more information, see Create a keyspace in the Amazon Keyspaces Developer Guide.