Module Awso_cloudformation_eioSource

Contains drift information for a resource property, including actual value, previous deployment value, and drift detection timestamp.

A specific property that is impacted by a warning.

The field that CloudFormation will change, such as the name of a resource's property, and whether the resource will be recreated.

A rollback trigger CloudFormation monitors during creation and updating of stacks. If any of the alarms you specify goes to ALARM state during the stack operation or within the specified monitoring period afterwards, CloudFormation rolls back the entire stack operation.

For a resource with Modify as the action, the ResourceChange structure describes the changes CloudFormation will make to that resource.

The ResourceDriftIgnoredAttribute data type.

Contains information about a CloudFormation operation.

The location of the resource in a stack template.

The Tag type enables you to specify a key-value pair that can be used to store information about an CloudFormation stack.

Context information that enables CloudFormation to uniquely identify a resource. CloudFormation uses context key-value pairs in cases where a resource's logical and physical IDs aren't enough to uniquely identify that resource. Each context key-value pair specifies a resource that contains the targeted resource.

Information about a resource property whose actual value differs from its expected value, as defined in the stack template and any values specified as template parameters. These will be present only for resources whose StackResourceDriftStatus is MODIFIED. For more information, see Detect unmanaged configuration changes to stacks and resources with drift detection.

The Output data type.

The Parameter data type.

The warnings generated for a specific resource for this generated template.

Contains information about the module from which the resource was created, if the resource was created from a module included in the stack template. For more information about modules, see Create reusable resource configurations that can be included across templates with CloudFormation modules in the CloudFormation User Guide.

Specifies RESOURCE type target details for activated Hooks.

Contains information about whether the stack's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters. A stack is considered to have drifted if one or more of its resources have drifted.

Describes whether StackSets automatically deploys to Organizations accounts that are added to a target organization or organizational unit (OU). For more information, see Enable or disable automatic deployments for StackSets in Organizations in the CloudFormation User Guide.

Describes whether StackSets performs non-conflicting operations concurrently and queues conflicting operations.

The user-specified preferences for how CloudFormation performs a StackSet operation. For more information about maximum concurrent accounts and failure tolerance, see StackSet operation options. StackSetOperationPreferences don't apply to AutoDeployment, even if it's enabled.

Detailed information about the StackSet operation.

Structure that contains the results of the account gate function which CloudFormation invokes, if present, before proceeding with a StackSet operation in an account and Region. For each account and Region, CloudFormation lets you specify a Lambda function that encapsulates any requirements that must be met before CloudFormation can proceed with a StackSet operation in that account and Region. CloudFormation invokes the function each time a StackSet operation is requested for that account and Region; if the function returns FAILED, CloudFormation cancels the operation in that account and Region, and sets the StackSet operation result status for that account and Region to FAILED. For more information, see Prevent failed StackSets deployments using target account gates in the CloudFormation User Guide.

Summarizes information about whether the resource's actual configuration differs, or has drifted, from its expected configuration.

Specifies the current source of the resource and the destination of where it will be moved to.

The detailed status of the stack instance.

A set of criteria that CloudFormation uses to validate parameter values. Although other constraints might be defined in the stack template, CloudFormation returns only the AllowedValues property.

Structure that contains the rollback triggers for CloudFormation to monitor during stack creation and updating operations, and for the specified monitoring period afterwards. Rollback triggers enable you to have CloudFormation monitor the state of your application during stack creation and updating, and to roll back that operation if the application breaches the threshold of any of the alarms you've specified. For more information, see Roll back your CloudFormation stack on alarm breach with rollback triggers.

Contains information about whether the stack's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters. A stack is considered to have drifted if one or more of its resources have drifted.

Contains information about whether the resource's actual configuration differs, or has drifted, from its expected configuration.

The ResourceChange structure describes the resource and the action that CloudFormation will perform on it if you execute this change set.

Specifies target details for an activated Hook.

Identifying information for the configuration of a CloudFormation extension.

The TemplateParameter data type.

A resource included in a generated template. This data type is used with the CreateGeneratedTemplate and UpdateGeneratedTemplate API actions.

A filter that is used to specify which resource types to scan.

Contains summary information about the specified CloudFormation extension.

Contains summary information about a specific version of a CloudFormation extension.

The StackSummary Data Type

The structures that contain summary information about the specified StackSet.

The structures that contain summary information about the specified operation.

The structure that contains information about a specified operation's results for a given account in a given Region.

The status that operation results are filtered by.

One of the targets for the StackSet. Returned by the ListStackSetAutoDeploymentTargets API operation.

Contains high-level information about the specified stack resource.

The summary of a stack refactor operation.

Describes the stack and the action that CloudFormation will perform on it if you execute the stack refactor.

The structure that contains summary information about a stack instance.

The filter to apply to stack instances

The structure containing summary information about resource drifts for a stack instance.

A summary of the resource scan. This is returned by the ListResourceScan API action.

A scanned resource returned by ListResourceScanResources or ListResourceScanRelatedResources.

Identifies a scanned resource. This is used with the ListResourceScanRelatedResources API action.

A ListHookResults call returns a summary of a Hook invocation.

The summary of a generated template.

The Export structure describes the exported output values for a stack. For more information, see Get exported outputs from a deployed CloudFormation stack.

The ChangeSetSummary structure describes a change set, its status, and the stack with which it's associated.

The ParameterDeclaration data type.

Describes the target resources of a specific type in your import template (for example, all AWS::S3::Bucket resources) and the properties you can provide during the import to identify resources of that type.

The Annotation data type. A GetHookResult call returns detailed information and remediation guidance from Control Tower, Guard, Lambda, or custom Hooks for a Hook invocation result.

For extensions that are modules, a public third-party extension that must be activated in your account in order for the module itself to be activated. For more information, see Requirements for activating third-party public modules in the CloudFormation User Guide.

The Stack data type.

Detailed information about the drift status of the StackSet. For StackSets, contains information about the last completed drift operation performed on the StackSet. Information about drift operations in-progress isn't included. For StackSet operations, includes information about drift operations currently being performed on the StackSet. For more information, see Performing drift detection on CloudFormation StackSets in the CloudFormation User Guide.

Specifies the Organizations accounts where you want to create, update, or delete stack instances. You can target either your entire organization or specific accounts using organizational units (OUs) and account filter options. CloudFormation doesn't deploy stack instances to the organization management account, even if the organization management account is in your organization or in an OU in your organization. When performing create operations, if you specify both OrganizationalUnitIds and Accounts, you must also specify the AccountFilterType property.

The StackResource data type.

Contains the drift information for a resource that has been checked for drift. This includes actual and expected property values for resources in which CloudFormation has detected drift. Only resource properties explicitly defined in the stack template are checked for drift. For more information, see Detect unmanaged configuration changes to stacks and resources with drift detection. Resources that don't currently support drift detection can't be checked. For a list of resources that support drift detection, see Resource type support for imports and drift detection. Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all resources in a given stack that support drift detection.

The StackEvent data type.

Details about a resource in a generated template

Contains detailed information about an event that occurred during a CloudFormation operation.

The Change structure describes the changes CloudFormation will perform if you execute the change set.

Specifies the resource, the Hook, and the Hook version to be invoked.

Describes the current CloudFormation limits for your account. CloudFormation has the following limits per account: Number of concurrent resources Number of stacks Number of stack outputs For more information, see Understand CloudFormation quotas in the CloudFormation User Guide.

Describes the stack and the template used by the stack.

Describes the target resource of an import operation.

Detailed information concerning an error generated during the setting of configuration data for a CloudFormation extension.

Detailed information concerning the specification of a CloudFormation extension in a given account and Region. For more information, see Edit configuration data for extensions in your account in the CloudFormation User Guide.

The specified operation isn't valid.

The specified operation ID already exists.

Another operation is currently in progress for this StackSet. Only one operation can be performed for a stack set at a given time.

The specified stack instance doesn't exist.

The specified StackSet doesn't exist.

Another operation has been performed on this StackSet since the specified operation was performed.

The template contains resources with capabilities that weren't specified in the Capabilities parameter.

A client request token already exists.

The resource with the name requested already exists.

The generated template was not found.

The quota for the resource has already been reached. For information about resource and stack limitations, see CloudFormation quotas in the CloudFormation User Guide.

The configuration details of a generated template.

An error occurred during a CloudFormation registry operation.

The specified extension doesn't exist in the CloudFormation registry.

The specified ID refers to an operation that doesn't exist.

A resource scan is currently in progress. Only one can be run at a time for an account in a Region.

The limit on resource scans has been exceeded. Reasons include: Exceeded the daily quota for resource scans. A resource scan recently failed. You must wait 10 minutes before starting a new resource scan. The last resource scan failed after exceeding 100,000 resources. When this happens, you must wait 24 hours before starting a new resource scan.

Contains logging configuration information for an extension.

Error reserved for use by the CloudFormation CLI. CloudFormation doesn't return this error to users.

Error reserved for use by the CloudFormation CLI. CloudFormation doesn't return this error to users.

Filter criteria to use in determining which extensions to return.

The resource scan was not found.

The specified target doesn't have any requested Hook invocations.

The specified stack ARN doesn't exist or stack doesn't exist corresponding to the ARN in input.

Contains any warnings returned by the GetTemplateSummary API action.

Options for the GetTemplateSummary API action.

The specified change set name or ID doesn't exit. To view valid change sets for a stack, use the ListChangeSets operation.

The HookTarget data type.

The specified change set can't be used to update the stack. For example, the change set status might be CREATE_IN_PROGRESS, or the stack status might be UPDATE_IN_PROGRESS.

A structure that contains information about a StackSet. With StackSets, you can provision stacks across Amazon Web Services accounts and Regions from a single CloudFormation template. Each stack is based on the same CloudFormation template, but you can customize individual stacks using parameters.

The structure that contains information about a StackSet operation.

Contains detailed information about the specified stack resource.

The specified stack refactor can't be found.

A CloudFormation stack, in a specific account and Region, that's part of a StackSet operation. A stack instance is a reference to an attempted or actual stack in a given account within a given Region. A stack instance can exist without a stack—for example, if the stack couldn't be created for some reason. A stack instance is associated with only one StackSet. Each stack instance contains the ID of its associated StackSet, in addition to the ID of the actual stack and the stack status.

A summary of the progress of the template generation.

Event filter allows you to focus on specific events in an operation.

You can't yet delete this StackSet, because it still contains one or more stack instances. Delete all stack instances from the StackSet before deleting the StackSet.

The specified resource exists, but has been changed.

The specified name is already in use.

No more than 5 generated templates can be in an InProgress or Pending status at one time. This error is also returned if a generated template that is in an InProgress or Pending status is attempted to be updated or deleted.

The specified extension configuration can't be found.

The output for ValidateTemplate action.

The input for ValidateTemplate action.

Updates termination protection for the specified stack. If a user attempts to delete a stack with termination protection enabled, the operation fails and the stack remains unchanged. For more information, see Protect a CloudFormation stack from being deleted in the CloudFormation User Guide. For nested stacks, termination protection is set on the root stack and can't be changed directly on the nested stack.

Updates termination protection for the specified stack. If a user attempts to delete a stack with termination protection enabled, the operation fails and the stack remains unchanged. For more information, see Protect a CloudFormation stack from being deleted in the CloudFormation User Guide. For nested stacks, termination protection is set on the root stack and can't be changed directly on the nested stack.

Updates the StackSet and associated stack instances in the specified accounts and Amazon Web Services Regions. Even if the StackSet operation created by updating the StackSet fails (completely or partially, below or above a specified failure tolerance), the StackSet is updated with your changes. Subsequent CreateStackInstances calls on the specified StackSet use the updated StackSet. The maximum number of organizational unit (OUs) supported by a UpdateStackSet operation is 50. If you need more than 50, consider the following options: Batch processing: If you don't want to expose your OU hierarchy, split up the operations into multiple calls with less than 50 OUs each. Parent OU strategy: If you don't mind exposing the OU hierarchy, target a parent OU that contains all desired child OUs.

Updates the StackSet and associated stack instances in the specified accounts and Amazon Web Services Regions. Even if the StackSet operation created by updating the StackSet fails (completely or partially, below or above a specified failure tolerance), the StackSet is updated with your changes. Subsequent CreateStackInstances calls on the specified StackSet use the updated StackSet. The maximum number of organizational unit (OUs) supported by a UpdateStackSet operation is 50. If you need more than 50, consider the following options: Batch processing: If you don't want to expose your OU hierarchy, split up the operations into multiple calls with less than 50 OUs each. Parent OU strategy: If you don't mind exposing the OU hierarchy, target a parent OU that contains all desired child OUs.

The output for an UpdateStack action.

Updates the parameter values for stack instances for the specified accounts, within the specified Amazon Web Services Regions. A stack instance refers to a stack in a specific account and Region. You can only update stack instances in Amazon Web Services Regions and accounts where they already exist; to create additional stack instances, use CreateStackInstances. During StackSet updates, any parameters overridden for a stack instance aren't updated, but retain their overridden value. You can only update the parameter values that are specified in the StackSet. To add or delete a parameter itself, use UpdateStackSet to update the StackSet template. If you add a parameter to a template, before you can override the parameter value specified in the StackSet you must first use UpdateStackSet to update all stack instances with the updated template and parameter value specified in the StackSet. Once a stack instance has been updated with the new parameter, you can then override the parameter value using UpdateStackInstances. The maximum number of organizational unit (OUs) supported by a UpdateStackInstances operation is 50. If you need more than 50, consider the following options: Batch processing: If you don't want to expose your OU hierarchy, split up the operations into multiple calls with less than 50 OUs each. Parent OU strategy: If you don't mind exposing the OU hierarchy, target a parent OU that contains all desired child OUs.

Updates the parameter values for stack instances for the specified accounts, within the specified Amazon Web Services Regions. A stack instance refers to a stack in a specific account and Region. You can only update stack instances in Amazon Web Services Regions and accounts where they already exist; to create additional stack instances, use CreateStackInstances. During StackSet updates, any parameters overridden for a stack instance aren't updated, but retain their overridden value. You can only update the parameter values that are specified in the StackSet. To add or delete a parameter itself, use UpdateStackSet to update the StackSet template. If you add a parameter to a template, before you can override the parameter value specified in the StackSet you must first use UpdateStackSet to update all stack instances with the updated template and parameter value specified in the StackSet. Once a stack instance has been updated with the new parameter, you can then override the parameter value using UpdateStackInstances. The maximum number of organizational unit (OUs) supported by a UpdateStackInstances operation is 50. If you need more than 50, consider the following options: Batch processing: If you don't want to expose your OU hierarchy, split up the operations into multiple calls with less than 50 OUs each. Parent OU strategy: If you don't mind exposing the OU hierarchy, target a parent OU that contains all desired child OUs.

The input for an UpdateStack action.

Updates a generated template. This can be used to change the name, add and remove resources, refresh resources, and change the DeletionPolicy and UpdateReplacePolicy settings. You can check the status of the update to the generated template using the DescribeGeneratedTemplate API action.

Updates a generated template. This can be used to change the name, add and remove resources, refresh resources, and change the DeletionPolicy and UpdateReplacePolicy settings. You can check the status of the update to the generated template using the DescribeGeneratedTemplate API action.

Tests a registered extension to make sure it meets all necessary requirements for being published in the CloudFormation registry. For resource types, this includes passing all contracts tests defined for the type. For modules, this includes determining if the module's model meets all necessary requirements. For more information, see Testing your public extension before publishing in the CloudFormation Command Line Interface (CLI) User Guide. If you don't specify a version, CloudFormation uses the default version of the extension in your account and Region for testing. To perform testing, CloudFormation assumes the execution role specified when the type was registered. For more information, see RegisterType. Once you've initiated testing on an extension using TestType, you can pass the returned TypeVersionArn into DescribeType to monitor the current test status and test status description for the extension. An extension must have a test status of PASSED before it can be published. For more information, see Publishing extensions to make them available for public use in the CloudFormation Command Line Interface (CLI) User Guide.

Tests a registered extension to make sure it meets all necessary requirements for being published in the CloudFormation registry. For resource types, this includes passing all contracts tests defined for the type. For modules, this includes determining if the module's model meets all necessary requirements. For more information, see Testing your public extension before publishing in the CloudFormation Command Line Interface (CLI) User Guide. If you don't specify a version, CloudFormation uses the default version of the extension in your account and Region for testing. To perform testing, CloudFormation assumes the execution role specified when the type was registered. For more information, see RegisterType. Once you've initiated testing on an extension using TestType, you can pass the returned TypeVersionArn into DescribeType to monitor the current test status and test status description for the extension. An extension must have a test status of PASSED before it can be published. For more information, see Publishing extensions to make them available for public use in the CloudFormation Command Line Interface (CLI) User Guide.

Stops an in-progress operation on a StackSet and its associated stack instances. StackSets will cancel all the unstarted stack instance deployments and wait for those are in-progress to complete.

Stops an in-progress operation on a StackSet and its associated stack instances. StackSets will cancel all the unstarted stack instance deployments and wait for those are in-progress to complete.

Starts a scan of the resources in this account in this Region. You can the status of a scan using the ListResourceScans API action.

Starts a scan of the resources in this account in this Region. You can the status of a scan using the ListResourceScans API action.

The input for the SignalResource action.

Specify the default version of an extension. The default version of an extension will be used in CloudFormation operations.

Specify the default version of an extension. The default version of an extension will be used in CloudFormation operations.

Specifies the configuration data for a CloudFormation extension, such as a resource or Hook, in the given account and Region. For more information, see Edit configuration data for extensions in your account in the CloudFormation User Guide. To view the current configuration data for an extension, refer to the ConfigurationSchema element of DescribeType. It's strongly recommended that you use dynamic references to restrict sensitive configuration definitions, such as third-party credentials. For more information, see Specify values stored in other services using dynamic references in the CloudFormation User Guide. For more information about setting the configuration data for resource types, see Defining the account-level configuration of an extension in the CloudFormation Command Line Interface (CLI) User Guide. For more information about setting the configuration data for Hooks, see the CloudFormation Hooks User Guide.

Specifies the configuration data for a CloudFormation extension, such as a resource or Hook, in the given account and Region. For more information, see Edit configuration data for extensions in your account in the CloudFormation User Guide. To view the current configuration data for an extension, refer to the ConfigurationSchema element of DescribeType. It's strongly recommended that you use dynamic references to restrict sensitive configuration definitions, such as third-party credentials. For more information, see Specify values stored in other services using dynamic references in the CloudFormation User Guide. For more information about setting the configuration data for resource types, see Defining the account-level configuration of an extension in the CloudFormation Command Line Interface (CLI) User Guide. For more information about setting the configuration data for Hooks, see the CloudFormation Hooks User Guide.

The input for the SetStackPolicy action.

When specifying RollbackStack, you preserve the state of previously provisioned resources when an operation fails. You can check the status of the stack through the DescribeStacks operation. Rolls back the specified stack to the last known stable state from CREATE_FAILED or UPDATE_FAILED stack statuses. This operation will delete a stack if it doesn't contain a last known stable state. A last known stable state includes any status in a *_COMPLETE. This includes the following stack statuses. CREATE_COMPLETE UPDATE_COMPLETE UPDATE_ROLLBACK_COMPLETE IMPORT_COMPLETE IMPORT_ROLLBACK_COMPLETE

When specifying RollbackStack, you preserve the state of previously provisioned resources when an operation fails. You can check the status of the stack through the DescribeStacks operation. Rolls back the specified stack to the last known stable state from CREATE_FAILED or UPDATE_FAILED stack statuses. This operation will delete a stack if it doesn't contain a last known stable state. A last known stable state includes any status in a *_COMPLETE. This includes the following stack statuses. CREATE_COMPLETE UPDATE_COMPLETE UPDATE_ROLLBACK_COMPLETE IMPORT_COMPLETE IMPORT_ROLLBACK_COMPLETE

Registers an extension with the CloudFormation service. Registering an extension makes it available for use in CloudFormation templates in your Amazon Web Services account, and includes: Validating the extension schema. Determining which handlers, if any, have been specified for the extension. Making the extension available for use in your account. For more information about how to develop extensions and ready them for registration, see Creating resource types using the CloudFormation CLI in the CloudFormation Command Line Interface (CLI) User Guide. You can have a maximum of 50 resource extension versions registered at a time. This maximum is per account and per Region. Use DeregisterType to deregister specific extension versions if necessary. Once you have initiated a registration request using RegisterType, you can use DescribeTypeRegistration to monitor the progress of the registration request. Once you have registered a private extension in your account and Region, use SetTypeConfiguration to specify configuration properties for the extension. For more information, see Edit configuration data for extensions in your account in the CloudFormation User Guide.

Registers an extension with the CloudFormation service. Registering an extension makes it available for use in CloudFormation templates in your Amazon Web Services account, and includes: Validating the extension schema. Determining which handlers, if any, have been specified for the extension. Making the extension available for use in your account. For more information about how to develop extensions and ready them for registration, see Creating resource types using the CloudFormation CLI in the CloudFormation Command Line Interface (CLI) User Guide. You can have a maximum of 50 resource extension versions registered at a time. This maximum is per account and per Region. Use DeregisterType to deregister specific extension versions if necessary. Once you have initiated a registration request using RegisterType, you can use DescribeTypeRegistration to monitor the progress of the registration request. Once you have registered a private extension in your account and Region, use SetTypeConfiguration to specify configuration properties for the extension. For more information, see Edit configuration data for extensions in your account in the CloudFormation User Guide.

Registers your account as a publisher of public extensions in the CloudFormation registry. Public extensions are available for use by all CloudFormation users. This publisher ID applies to your account in all Amazon Web Services Regions. For information about requirements for registering as a public extension publisher, see Prerequisite: Registering your account to publish CloudFormation extensions in the CloudFormation Command Line Interface (CLI) User Guide.

Registers your account as a publisher of public extensions in the CloudFormation registry. Public extensions are available for use by all CloudFormation users. This publisher ID applies to your account in all Amazon Web Services Regions. For information about requirements for registering as a public extension publisher, see Prerequisite: Registering your account to publish CloudFormation extensions in the CloudFormation Command Line Interface (CLI) User Guide.

Reports progress of a resource handler to CloudFormation. Reserved for use by the CloudFormation CLI. Don't use this API in your code.

Reports progress of a resource handler to CloudFormation. Reserved for use by the CloudFormation CLI. Don't use this API in your code.

Publishes the specified extension to the CloudFormation registry as a public extension in this Region. Public extensions are available for use by all CloudFormation users. For more information about publishing extensions, see Publishing extensions to make them available for public use in the CloudFormation Command Line Interface (CLI) User Guide. To publish an extension, you must be registered as a publisher with CloudFormation. For more information, see RegisterPublisher.

Publishes the specified extension to the CloudFormation registry as a public extension in this Region. Public extensions are available for use by all CloudFormation users. For more information about publishing extensions, see Publishing extensions to make them available for public use in the CloudFormation Command Line Interface (CLI) User Guide. To publish an extension, you must be registered as a publisher with CloudFormation. For more information, see RegisterPublisher.

Returns summary information about all extensions, including your private resource types, modules, and Hooks as well as all public extensions from Amazon Web Services and third-party publishers.

Returns summary information about all extensions, including your private resource types, modules, and Hooks as well as all public extensions from Amazon Web Services and third-party publishers.

Returns summary information about the versions of an extension.

Returns summary information about the versions of an extension.

Returns a list of registration tokens for the specified extension(s).

Returns a list of registration tokens for the specified extension(s).

The output for ListStacks action.

The input for ListStacks action.

Returns summary information about StackSets that are associated with the user. This API provides strongly consistent reads meaning it will always return the most up-to-date data. [Self-managed permissions] If you set the CallAs parameter to SELF while signed in to your Amazon Web Services account, ListStackSets returns all self-managed StackSets in your Amazon Web Services account. [Service-managed permissions] If you set the CallAs parameter to SELF while signed in to the organization's management account, ListStackSets returns all StackSets in the management account. [Service-managed permissions] If you set the CallAs parameter to DELEGATED_ADMIN while signed in to your member account, ListStackSets returns all StackSets with service-managed permissions in the management account.

Returns summary information about StackSets that are associated with the user. This API provides strongly consistent reads meaning it will always return the most up-to-date data. [Self-managed permissions] If you set the CallAs parameter to SELF while signed in to your Amazon Web Services account, ListStackSets returns all self-managed StackSets in your Amazon Web Services account. [Service-managed permissions] If you set the CallAs parameter to SELF while signed in to the organization's management account, ListStackSets returns all StackSets in the management account. [Service-managed permissions] If you set the CallAs parameter to DELEGATED_ADMIN while signed in to your member account, ListStackSets returns all StackSets with service-managed permissions in the management account.

Returns summary information about operations performed on a StackSet. This API provides eventually consistent reads meaning it may take some time but will eventually return the most up-to-date data.

Returns summary information about operations performed on a StackSet. This API provides eventually consistent reads meaning it may take some time but will eventually return the most up-to-date data.

Returns summary information about the results of a StackSet operation. This API provides eventually consistent reads meaning it may take some time but will eventually return the most up-to-date data.

Returns summary information about the results of a StackSet operation. This API provides eventually consistent reads meaning it may take some time but will eventually return the most up-to-date data.

Returns summary information about deployment targets for a StackSet.

Returns summary information about deployment targets for a StackSet.

The output for a ListStackResources action.

The input for the ListStackResource action.

Lists all account stack refactor operations and their statuses.

Lists all account stack refactor operations and their statuses.

Lists the stack refactor actions that will be taken after calling the ExecuteStackRefactor action.

Lists the stack refactor actions that will be taken after calling the ExecuteStackRefactor action.

Returns summary information about stack instances that are associated with the specified StackSet. You can filter for stack instances that are associated with a specific Amazon Web Services account name or Region, or that have a specific status.

Returns summary information about stack instances that are associated with the specified StackSet. You can filter for stack instances that are associated with a specific Amazon Web Services account name or Region, or that have a specific status.

Returns drift information for resources in a stack instance. ListStackInstanceResourceDrifts returns drift information for the most recent drift detection operation. If an operation is in progress, it may only return partial results.

Returns drift information for resources in a stack instance. ListStackInstanceResourceDrifts returns drift information for the most recent drift detection operation. If an operation is in progress, it may only return partial results.

List the resource scans from newest to oldest. By default it will return up to 10 resource scans.

List the resource scans from newest to oldest. By default it will return up to 10 resource scans.

Lists the resources from a resource scan. The results can be filtered by resource identifier, resource type prefix, tag key, and tag value. Only resources that match all specified filters are returned. The response indicates whether each returned resource is already managed by CloudFormation.

Lists the resources from a resource scan. The results can be filtered by resource identifier, resource type prefix, tag key, and tag value. Only resources that match all specified filters are returned. The response indicates whether each returned resource is already managed by CloudFormation.

Lists the related resources for a list of resources from a resource scan. The response indicates whether each returned resource is already managed by CloudFormation.

Lists the related resources for a list of resources from a resource scan. The response indicates whether each returned resource is already managed by CloudFormation.

Lists all stacks that are importing an exported output value. To modify or remove an exported output value, first use this action to see which stacks are using it. To see the exported output values in your account, see ListExports. For more information about importing an exported output value, see the Fn::ImportValue function.

Lists all stacks that are importing an exported output value. To modify or remove an exported output value, first use this action to see which stacks are using it. To see the exported output values in your account, see ListExports. For more information about importing an exported output value, see the Fn::ImportValue function.

Returns summaries of invoked Hooks. For more information, see View invocation summaries for CloudFormation Hooks in the CloudFormation Hooks User Guide. This operation supports the following parameter combinations: No parameters: Returns all Hook invocation summaries. TypeArn only: Returns summaries for a specific Hook. TypeArn and Status: Returns summaries for a specific Hook filtered by status. TargetId and TargetType: Returns summaries for a specific Hook invocation target.

Returns summaries of invoked Hooks. For more information, see View invocation summaries for CloudFormation Hooks in the CloudFormation Hooks User Guide. This operation supports the following parameter combinations: No parameters: Returns all Hook invocation summaries. TypeArn only: Returns summaries for a specific Hook. TypeArn and Status: Returns summaries for a specific Hook filtered by status. TargetId and TargetType: Returns summaries for a specific Hook invocation target.

Lists your generated templates in this Region.

Lists your generated templates in this Region.

Lists all exported output values in the account and Region in which you call this action. Use this action to see the exported output values that you can import into other stacks. To import values, use the Fn::ImportValue function. For more information, see Get exported outputs from a deployed CloudFormation stack.

Lists all exported output values in the account and Region in which you call this action. Use this action to see the exported output values that you can import into other stacks. To import values, use the Fn::ImportValue function. For more information, see Get exported outputs from a deployed CloudFormation stack.

The output for the ListChangeSets action.

The input for the ListChangeSets action.

Import existing stacks into a new StackSets. Use the stack import operation to import up to 10 stacks into a new StackSet in the same account as the source stack or in a different administrator account and Region, by specifying the stack ID of the stack you intend to import.

Import existing stacks into a new StackSets. Use the stack import operation to import up to 10 stacks into a new StackSet in the same account as the source stack or in a different administrator account and Region, by specifying the stack ID of the stack you intend to import.

The output for the GetTemplateSummary action.

The input for the GetTemplateSummary action.

The output for GetTemplate action.

The input for a GetTemplate action.

The output for the GetStackPolicy action.

The input for the GetStackPolicy action.

Retrieves detailed information and remediation guidance for a Hook invocation result. If the Hook uses a KMS key to encrypt annotations, callers of the GetHookResult operation must have kms:Decrypt permissions. For more information, see KMS key policy and permissions for encrypting CloudFormation Hooks results at rest in the CloudFormation Hooks User Guide.

Retrieves detailed information and remediation guidance for a Hook invocation result. If the Hook uses a KMS key to encrypt annotations, callers of the GetHookResult operation must have kms:Decrypt permissions. For more information, see KMS key policy and permissions for encrypting CloudFormation Hooks results at rest in the CloudFormation Hooks User Guide.

Retrieves a generated template. If the template is in an InProgress or Pending status then the template returned will be the template when the template was last in a Complete status. If the template has not yet been in a Complete status then an empty template will be returned.

Retrieves a generated template. If the template is in an InProgress or Pending status then the template returned will be the template when the template was last in a Complete status. If the template has not yet been in a Complete status then an empty template will be returned.

Executes the stack refactor operation.

The output for the ExecuteChangeSet action.

The input for the ExecuteChangeSet action.

The output for a EstimateTemplateCost action.

The input for an EstimateTemplateCost action.

Detect drift on a StackSet. When CloudFormation performs drift detection on a StackSet, it performs drift detection on the stack associated with each stack instance in the StackSet. For more information, see Performing drift detection on CloudFormation StackSets. DetectStackSetDrift returns the OperationId of the StackSet drift detection operation. Use this operation id with DescribeStackSetOperation to monitor the progress of the drift detection operation. The drift detection operation may take some time, depending on the number of stack instances included in the StackSet, in addition to the number of resources included in each stack. Once the operation has completed, use the following actions to return drift information: Use DescribeStackSet to return detailed information about the stack set, including detailed information about the last completed drift operation performed on the StackSet. (Information about drift operations that are in progress isn't included.) Use ListStackInstances to return a list of stack instances belonging to the StackSet, including the drift status and last drift time checked of each instance. Use DescribeStackInstance to return detailed information about a specific stack instance, including its drift status and last drift time checked. You can only run a single drift detection operation on a given StackSet at one time. To stop a drift detection StackSet operation, use StopStackSetOperation.

Detect drift on a StackSet. When CloudFormation performs drift detection on a StackSet, it performs drift detection on the stack associated with each stack instance in the StackSet. For more information, see Performing drift detection on CloudFormation StackSets. DetectStackSetDrift returns the OperationId of the StackSet drift detection operation. Use this operation id with DescribeStackSetOperation to monitor the progress of the drift detection operation. The drift detection operation may take some time, depending on the number of stack instances included in the StackSet, in addition to the number of resources included in each stack. Once the operation has completed, use the following actions to return drift information: Use DescribeStackSet to return detailed information about the stack set, including detailed information about the last completed drift operation performed on the StackSet. (Information about drift operations that are in progress isn't included.) Use ListStackInstances to return a list of stack instances belonging to the StackSet, including the drift status and last drift time checked of each instance. Use DescribeStackInstance to return detailed information about a specific stack instance, including its drift status and last drift time checked. You can only run a single drift detection operation on a given StackSet at one time. To stop a drift detection StackSet operation, use StopStackSetOperation.

Returns information about whether a resource's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters. This information includes actual and expected property values for resources in which CloudFormation detects drift. Only resource properties explicitly defined in the stack template are checked for drift. For more information about stack and resource drift, see Detect unmanaged configuration changes to stacks and resources with drift detection. Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all resources in a given stack that support drift detection. Resources that don't currently support drift detection can't be checked. For a list of resources that support drift detection, see Resource type support for imports and drift detection.

Returns information about whether a resource's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters. This information includes actual and expected property values for resources in which CloudFormation detects drift. Only resource properties explicitly defined in the stack template are checked for drift. For more information about stack and resource drift, see Detect unmanaged configuration changes to stacks and resources with drift detection. Use DetectStackResourceDrift to detect drift on individual resources, or DetectStackDrift to detect drift on all resources in a given stack that support drift detection. Resources that don't currently support drift detection can't be checked. For a list of resources that support drift detection, see Resource type support for imports and drift detection.

Detects whether a stack's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters. For each resource in the stack that supports drift detection, CloudFormation compares the actual configuration of the resource with its expected template configuration. Only resource properties explicitly defined in the stack template are checked for drift. A stack is considered to have drifted if one or more of its resources differ from their expected template configurations. For more information, see Detect unmanaged configuration changes to stacks and resources with drift detection. Use DetectStackDrift to detect drift on all supported resources for a given stack, or DetectStackResourceDrift to detect drift on individual resources. For a list of stack resources that currently support drift detection, see Resource type support for imports and drift detection. DetectStackDrift can take up to several minutes, depending on the number of resources contained within the stack. Use DescribeStackDriftDetectionStatus to monitor the progress of a detect stack drift operation. Once the drift detection operation has completed, use DescribeStackResourceDrifts to return drift information about the stack and its resources. When detecting drift on a stack, CloudFormation doesn't detect drift on any nested stacks belonging to that stack. Perform DetectStackDrift directly on the nested stack itself.

Detects whether a stack's actual configuration differs, or has drifted, from its expected configuration, as defined in the stack template and any values specified as template parameters. For each resource in the stack that supports drift detection, CloudFormation compares the actual configuration of the resource with its expected template configuration. Only resource properties explicitly defined in the stack template are checked for drift. A stack is considered to have drifted if one or more of its resources differ from their expected template configurations. For more information, see Detect unmanaged configuration changes to stacks and resources with drift detection. Use DetectStackDrift to detect drift on all supported resources for a given stack, or DetectStackResourceDrift to detect drift on individual resources. For a list of stack resources that currently support drift detection, see Resource type support for imports and drift detection. DetectStackDrift can take up to several minutes, depending on the number of resources contained within the stack. Use DescribeStackDriftDetectionStatus to monitor the progress of a detect stack drift operation. Once the drift detection operation has completed, use DescribeStackResourceDrifts to return drift information about the stack and its resources. When detecting drift on a stack, CloudFormation doesn't detect drift on any nested stacks belonging to that stack. Perform DetectStackDrift directly on the nested stack itself.

Returns information about an extension's registration, including its current status and type and version identifiers. When you initiate a registration request using RegisterType, you can then use DescribeTypeRegistration to monitor the progress of that registration request. Once the registration request has completed, use DescribeType to return detailed information about an extension.

Returns information about an extension's registration, including its current status and type and version identifiers. When you initiate a registration request using RegisterType, you can then use DescribeTypeRegistration to monitor the progress of that registration request. Once the registration request has completed, use DescribeType to return detailed information about an extension.

Returns detailed information about an extension from the CloudFormation registry in your current account and Region. If you specify a VersionId, DescribeType returns information about that specific extension version. Otherwise, it returns information about the default extension version. For more information, see Edit configuration data for extensions in your account in the CloudFormation User Guide.

Returns detailed information about an extension from the CloudFormation registry in your current account and Region. If you specify a VersionId, DescribeType returns information about that specific extension version. Otherwise, it returns information about the default extension version. For more information, see Edit configuration data for extensions in your account in the CloudFormation User Guide.

The output for a DescribeStacks action.

The input for DescribeStacks action.

Returns the description of the specified StackSet. This API provides strongly consistent reads meaning it will always return the most up-to-date data.

Returns the description of the specified StackSet operation. This API provides strongly consistent reads meaning it will always return the most up-to-date data.