Awso_sesv2.ValuesSourceval structure_to_value_aux :
('a * 'b option) list ->
f:(('a * 'b) list -> 'c) ->
[> `Structure of 'c ]val structure_to_wrapped_value :
wrapper:'a ->
response:'a ->
('b * 'c option) list ->
[> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]The default value of the dimension that is published to Amazon CloudWatch if you don't provide the value of the dimension when you send an email. This value has to meet the following criteria: It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_), or dashes (-). It can contain no more than 256 characters.
The name of an Amazon CloudWatch dimension associated with an email sending metric. The name has to meet the following criteria: It can only contain ASCII letters (a-z, A-Z), numbers (0-9), underscores (_), or dashes (-). It can contain no more than 256 characters.
The name of the message header. The message header name has to meet the following criteria: Can contain any printable ASCII character (33 - 126) except for colon (:). Can contain no more than 126 characters.
The value of the message header. The message header value has to meet the following criteria: Can contain any printable ASCII character.
The name of the message tag. The message tag name has to meet the following criteria: It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_), or dashes (-). It can contain no more than 256 characters.
The value of the message tag. The message tag value has to meet the following criteria: It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_), or dashes (-). It can contain no more than 256 characters.
An object that defines the values to use for message variables in the template. This object is a set of key-value pairs. Each key defines a message variable in the template. The corresponding value defines the value to use for that variable.
Contains a Bounce object if the event type is BOUNCE. Contains a Complaint object if the event type is COMPLAINT.
A list of values associated with the MetricDimensionName to filter metrics by. Can either be * as a wildcard for all values or a list of up to 10 specific values. If one Dimension has the * value, other dimensions can only contain one value.
An object that contains information about inbox placement percentages.
An object that defines the dimension configuration to use when you send email events to Amazon CloudWatch.
Contains metadata and attachment raw content.
An object that represents the content of the email, and optionally a character set specification.
Contains the name and value of a message header that you add to an email.
The HTML body of the email.
The subject line of the email.
The email body that will be visible to recipients whose email clients do not display HTML.
Contains the name and value of a tag that you apply to an email. You can use message tags when you publish email sending events.
An object which contains ReplacementTemplateData to be used for a specific BulkEmailEntry.
A description of the reason for a status change, such as automated actions taken due to reputation findings or manual status updates.
An object that contains details about the action of a contact list.
An object that contains details about the action of suppression list.
The contact's preference for being opted-in to or opted-out of a topic.
An object containing details about a specific event.
An object that contains a mapping between a Metric and MetricAggregation.
An object that contains inbox placement data for email sent from one of your email domains to a specific email provider.
Contains the confidence threshold settings for Auto Validation.
A description of the blacklisting event.
The raw email message. The message has to meet the following criteria: The message has to contain a header and a body, separated by one blank line. All of the required header fields must be present in the message. Each part of a multipart MIME message must be formatted properly. Attachments must be in a file format that the Amazon SES API v2 supports. The entire message must be Base64 encoded. If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, you should encode that content to ensure that recipients' email clients render the message properly. The length of any single line of text in the message can't exceed 1,000 characters. This restriction is defined in RFC 5321.
The content of the email, composed of a subject line, an HTML part, and a text-only part.
The name of the template. You will refer to this name when you send email using the SendEmail or SendBulkEmail operations.
An object that describes the recipients for an email. Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the local part of a destination email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492.
The ReplaceEmailContent object to be used for a specific BulkEmailEntry. The ReplacementTemplate can be specified within this object.
An object that contains information about the inbox placement data settings for a verified domain that’s associated with your Amazon Web Services account. This data is available only if you enabled the Deliverability dashboard for the domain.
The name of a tenant. The name can contain up to 64 alphanumeric characters, including letters, numbers, hyphens (-) and underscores (_) only.
The unique identifier for a reputation entity. For resource-type entities, this is the Amazon Resource Name (ARN) of the resource.
An object that contains status information for a reputation entity, including the current status, cause description, and timestamp.
The ID of the multi-region endpoint (global-endpoint).
The name of the multi-region endpoint (global-endpoint).
An object that contains details about the resource destination the import job is going to target.
The subject line for an email that you submitted in a predictive inbox placement test.
A unique string that identifies a Deliverability dashboard report.
A name that helps you identify a report generated by the Deliverability dashboard.
The URL that the recipient of the verification email is sent to if his or her address is not successfully verified.
The URL that the recipient of the verification email is sent to if his or her address is successfully verified.
An object that defines the tags that are associated with a resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags. Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for a more specific tag value. A tag value acts as a descriptor within a tag key. A tag key can contain as many as 128 characters. A tag value can contain as many as 256 characters. The characters can be Unicode letters, digits, white space, or one of the following symbols: _ . : / = + -. The following additional restrictions apply to tags: Tag keys and values are case sensitive. For each associated resource, each tag key must be unique and it can have only one value. The aws: prefix is reserved for use by Amazon Web Services; you can’t use it in any tag keys or values that you define. In addition, you can't edit or remove tag keys or values that use this prefix. Tags that use this prefix don’t count against the limit of 50 tags per resource. You can associate tags with public or shared resources, but the tags are available only for your Amazon Web Services account, not any other accounts that share the resource. In addition, the tags are available only for resources that are located in the specified Amazon Web Services Region for your Amazon Web Services account.
An object containing Message Insights filters. If you specify multiple filters, the filters are joined by AND. If you specify multiple values for a filter, the values are joined by OR. Filter values are case-sensitive. FromEmailAddress, Destination, and Subject filters support partial match. A partial match is performed by using the * wildcard character placed at the beginning (suffix match), the end (prefix match) or both ends of the string (contains match). In order to match the literal characters * or \, they must be escaped using the \ character. If no wildcard character is present, an exact match is performed.
Contains the overall validation verdict for an email address.
An object that contains information about the amount of email that was delivered to recipients.
An object that contains inbox placement data for an email provider.
Contains Auto Validation settings, allowing you to suppress sending to specific destination(s) if they do not meet required threshold. For details on Auto Validation, see Auto Validation.
An object that defines an Amazon CloudWatch destination for email events. You can use Amazon CloudWatch to monitor and gain insights on your email sending metrics.
An object that defines an Amazon EventBridge destination for email events. You can use Amazon EventBridge to send notifications when certain email events occur.
The name of an event destination. Events include message sends, deliveries, opens, clicks, bounces, and complaints. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon SNS to receive notifications when you receive bounces or complaints, or you can use Amazon Kinesis Data Firehose to stream data to Amazon S3 for long-term storage.
An object that defines an Amazon Kinesis Data Firehose destination for email events. You can use Amazon Kinesis Data Firehose to stream data to other services, such as Amazon S3 and Amazon Redshift.
An object that defines an Amazon Pinpoint project destination for email events. You can send email event data to a Amazon Pinpoint project to view metrics using the Transactional Messaging dashboards that are built in to Amazon Pinpoint. For more information, see Transactional Messaging Charts in the Amazon Pinpoint User Guide.
An object that defines an Amazon SNS destination for email events. You can use Amazon SNS to send notifications when certain email events occur.
An object that contains information about a blacklisting event that impacts one of the dedicated IP addresses that is associated with your account.
An object that contains route configuration. Includes secondary region name.
An interest group, theme, or label within a list. Lists can have multiple topics.
Represents the email message that you're sending. The Message object consists of a subject line and a message body.
Represents the raw content of an email message.
An object that defines the email template to use for an email message, and the values to use for any message variables in that template. An email template is a type of message template that contains content that you want to reuse in email messages that you send. You can specifiy the email template by providing the name or ARN of an email template previously saved in your Amazon SES account or by providing the full template content.
The result of the SendBulkEmail operation of each specified BulkEmailEntry.
An object that contains information about the Deliverability dashboard subscription for a verified domain that you use to send email and currently has an active Deliverability dashboard subscription. If a Deliverability dashboard subscription is active for a domain, you gain access to reputation, inbox placement, and other metrics for the domain.
An object containing additional settings for your VDM configuration as applicable to the Dashboard.
An object containing additional settings for your VDM configuration as applicable to the Guardian.
An object containing additional settings for your VDM configuration as applicable to the Dashboard.
An object containing additional settings for your VDM configuration as applicable to the Guardian.
A structure that contains basic information about a tenant.
A structure that contains information about a resource associated with a tenant.
The value used to filter tenant resources. When filtering by RESOURCE_TYPE, valid values are EMAIL_IDENTITY, CONFIGURATION_SET, or EMAIL_TEMPLATE.
A summary that describes the suppressed email address.
A structure that contains information about a tenant associated with a resource.
An object that contains information about a reputation entity, including its reference, type, policy, status records, and reputation impact.
The filter value to match against the specified filter key.
A recommendation generated for your account.
An object that contains multi-region endpoint (global-endpoint) properties.
A summary of the import job.
A summary of the export job.
Contains information about an email template.
Information about an email identity.
An object that contains the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for (PutDeliverabilityDashboardOption operation).
An object that contains metadata related to a predictive inbox placement test.
Contains information about a custom verification email template.
Used for filtering by a specific topic preference.
A list that contains contacts that have subscribed to a particular topic or topics.
The name of a configuration set. Configuration sets are groups of rules that you can apply to the emails you send. You apply a configuration set to an email by including a reference to the configuration set in the headers of the email. When you apply a configuration set to an email, all of the rules in that configuration set are applied to the email.
An object that contains additional attributes that are related an email address that is on the suppression list for your account.
An email's insights contain metadata and delivery information about a specific email.
An Amazon S3 URL in the format s3://<bucket_name>/<object> or a pre-signed URL.
An object that contains filters applied when performing the Message Insights export.
An object that contains details about the data source for the metrics export.
The domain to use as a MAIL FROM domain.
The text of the policy in JSON format. The policy cannot exceed 4 KB. For information about the syntax of sending authorization policies, see the Amazon SES Developer Guide.
The name of the policy. The policy name cannot exceed 64 characters and can only include alphanumeric characters, dashes, and underscores.
An object that contains information about the start of authority (SOA) record associated with the identity.
Contains individual validation checks performed on an email address.
An object that contains information about the volume of email sent on each day of the analysis period.
An object that describes how email sent during the predictive inbox placement test was handled by a certain email provider.
Contains information about a dedicated IP address that is associated with your Amazon SES account. To learn more about requesting dedicated IP addresses, see Requesting and Relinquishing Dedicated IP Addresses in the Amazon SES Developer Guide.
The date and time (in Unix time) when the reputation metrics were last given a fresh start. When your account is given a fresh start, your reputation metrics are calculated starting from the date of the fresh start.
Contains validation options for email address suppression.
The domain to use for tracking open and click events.
In the Amazon SES API v2, events include message sends, deliveries, opens, clicks, bounces, complaints and delivery delays. Event destinations are places that you can send information about these events to. For example, you can send event data to Amazon SNS to receive notifications when you receive bounces or complaints, or you can use Amazon Kinesis Data Firehose to stream data to Amazon S3 for long-term storage.
An IP address that you want to obtain blacklist information for.
An object that contains information about your account details review.
Structure containing validation attributes used for suppressing sending to specific destination on account level.
An error corresponding to the unsuccessful processing of a single metric data query.
The result of a single metric data query.
Represents a single metric data query to include in a batch.
The input you provided is invalid.
If there is already an ongoing account details update under review.
Too many requests have been made to the operation.
The resource you attempted to access doesn't exist.
The content of the custom verification email template.
The resource is being modified by another operation or thread.
An object that defines the event destination. Specifically, it defines which services receive events from emails sent using the configuration set that the event destination is associated with. Also defines the types of events that are sent to the event destination.
The complete MIME message rendered by applying the data in the TemplateData parameter to the template specified in the TemplateName parameter.
The message can't be sent because the account's ability to send email has been permanently restricted.
There are too many instances of the specified resource type.
The message can't be sent because the sending domain isn't verified.
The message can't be sent because it contains invalid content.
The message can't be sent because the account's ability to send email is currently paused.
An object that defines the entire content of the email, including the message headers, body content, and attachments. For a simple email message, you specify the subject and provide both text and HTML versions of the message body. You can also add attachments to simple and templated messages. For a raw message, you provide a complete MIME-formatted message, which can include custom headers and attachments.
An object used to specify a list or topic to which an email belongs, which will be used when a contact chooses to unsubscribe.
An object that contains the body of the message. You can specify a template message.
An object that contains configuration for Bring Your Own DKIM (BYODKIM), or, for Easy DKIM
The resource specified in your request already exists.
An object that defines the VDM settings that apply to emails that you send using the configuration set.
The name of the dedicated IP pool to associate with the configuration set.
The VDM attributes that apply to your Amazon SES account.
The specified request includes an invalid or expired token.
A filter that can be applied to a list of contacts.
An object that contains information about an email address that is on the suppression list for your account.
An object that contains the failure details about a job.
An object that contains details about the data source of the import job.
An object that contains details about the data source of the export job. It can only contain one of MetricsDataSource or MessageInsightsDataSource object.
An object that contains details about the destination of the export job.
Statistics about the execution of an export job.
An object that contains information about the DKIM authentication status for an email identity. Amazon SES determines the authentication status by searching for specific records in the DNS configuration for the domain. If you used Easy DKIM to set up DKIM authentication, Amazon SES tries to find three unique CNAME records in the DNS configuration for your domain. If you provided a public key to perform DKIM authentication, Amazon SES tries to find a TXT record that uses the selector that you specified. The value of the TXT record must be a public key that's paired with the private key that you specified in the process of creating the identity
A list of attributes that are associated with a MAIL FROM domain.
An object that contains additional information about the verification status for the identity.
Contains detailed validation information about an email address.
An object that contains information about email that was sent from the selected domain.
The body of an email message.
Contains information about a dedicated IP pool.
Used to associate a configuration set with a MailManager archive.
Used to associate a configuration set with a dedicated IP pool.
Enable or disable collection of reputation metrics for emails that you send using this configuration set in the current Amazon Web Services Region.
Used to enable or disable email sending for messages that use this configuration set in the current Amazon Web Services Region.
An object that contains information about the suppression list preferences for your account.
An object that defines the tracking options for a configuration set. When you use the Amazon SES API v2 to send an email, it contains an invisible image that's used to track when recipients open your email. If your email contains links, those links are changed slightly in order to track when recipients click them. These images and links include references to a domain operated by Amazon Web Services. You can optionally configure the Amazon SES to use a domain that you operate for these images and links.
An object that contains information about your account details.
An object that contains information about the per-day and per-second sending limits for your Amazon SES account in the current Amazon Web Services Region.
An object that contains information about the email address suppression preferences for your account in the current Amazon Web Services Region.
An object that contains configuration details of multi-region endpoint (global-endpoint).
The request couldn't be processed because an error occurred with the Amazon SES API v2.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to update the reputation management policy for a reputation entity.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to update the customer-managed sending status for a reputation entity.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to update an email template. For more information, see the Amazon SES Developer Guide.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to update a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to update an existing custom verification email template.
Updates a contact's preferences for a list. You must specify all existing topic preferences in the TopicPreferences object, not just the ones that need updating; otherwise, all your existing preferences will be removed.
Updates a contact's preferences for a list. You must specify all existing topic preferences in the TopicPreferences object, not just the ones that need updating; otherwise, all your existing preferences will be removed.
Updates contact list metadata. This operation does a complete replacement.
Updates contact list metadata. This operation does a complete replacement.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to change the settings for an event destination for a configuration set.
Remove one or more tags (keys and values) from a specified resource.
Remove one or more tags (keys and values) from a specified resource.
The following element is returned by the service.
>Represents a request to create a preview of the MIME content of an email when provided with a template and a set of replacement data.
Add one or more tags (keys and values) to a specified resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags. Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.
Add one or more tags (keys and values) to a specified resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags. Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.
A unique message ID that you receive when an email is accepted for sending.
Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer Guide.
The following element is returned by the service.
Represents a request to send a custom verification email to a specified recipient.
The following data is returned in JSON format by the service.
Represents a request to send email messages to multiple destinations using Amazon SES. For more information, see the Amazon SES Developer Guide.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to add an email destination to the suppression list for your account.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to configure the custom MAIL FROM domain for a verified identity.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to set the attributes that control how bounce and complaint events are processed.
If the action is successful, the service sends back an HTTP 200 response. The following data is returned in JSON format by the service.
A request to change the DKIM attributes for an email identity.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to enable or disable DKIM signing of email that you send from an email identity.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
A request to associate a configuration set with an email identity.
A response that indicates whether the Deliverability dashboard is enabled.
Enable or disable the Deliverability dashboard. When you enable the Deliverability dashboard, you gain access to reputation, deliverability, and other metrics for the domains that you use to send email using Amazon SES API v2. You also gain the ability to perform predictive inbox placement tests. When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to change the warm-up attributes for a dedicated IP address. This operation is useful when you want to resume the warm-up process for an existing IP address.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to convert a dedicated IP pool to a different scaling mode.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to move a dedicated IP address to a dedicated IP pool.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to add specific VDM settings to a configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to add a custom domain for tracking open and click events to a configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to change the account suppression list preferences for a specific configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to enable or disable the ability of Amazon SES to send emails that use a specific configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to enable or disable tracking of reputation metrics for a configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to associate a configuration set with a dedicated IP pool.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to associate a configuration set with a MailManager archive.
Update your Amazon SES account VDM attributes. You can execute this operation no more than once per second.
A request to submit new account VDM attributes.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to change your account's suppression preferences.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to change the ability of your account to send email.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to submit new account details.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to enable or disable the automatic IP address warm-up feature.
Information about tenants associated with your account.
Represents a request to list all tenants associated with your account in the current Amazon Web Services Region.
Information about resources associated with a specific tenant.
Represents a request to list resources associated with a specific tenant.
Retrieve a list of the tags (keys and values) that are associated with a specified resource. A tag is a label that you optionally define and associate with a resource. Each tag consists of a required tag key and an optional associated tag value. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.
Retrieve a list of the tags (keys and values) that are associated with a specified resource. A tag is a label that you optionally define and associate with a resource. Each tag consists of a required tag key and an optional associated tag value. A tag key is a general label that acts as a category for more specific tag values. A tag value acts as a descriptor within a tag key.
A list of suppressed email addresses.
A request to obtain a list of email destinations that are on the suppression list for your account.
Information about tenants associated with a specific resource.
Represents a request to list tenants associated with a specific resource.
A list of reputation entities in your account.
Represents a request to list reputation entities with optional filtering.
Contains the response to your request to retrieve the list of recommendations for your account.
Represents a request to list the existing recommendations for your account.
The following elements are returned by the service.
Represents a request to list all the multi-region endpoints (global-endpoints) whose primary region is the AWS-Region where operation is executed.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to list all of the import jobs for a data destination within the specified maximum number of import jobs.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to list all export jobs with filters.
The following elements are returned by the service.
Represents a request to list the email templates present in your Amazon SES account in the current Amazon Web Services Region. For more information, see the Amazon SES Developer Guide.
A list of all of the identities that you've attempted to verify, regardless of whether or not those identities were successfully verified.
A request to list all of the email identities associated with your Amazon Web Services account. This list includes identities that you've already verified, identities that are unverified, and identities that were verified in the past, but are no longer verified.
An array of objects that provide deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard for the domain.
Retrieve deliverability data for all the campaigns that used a specific domain to send email during a specified time range. This data is available for a domain only if you enabled the Deliverability dashboard.
A list of the predictive inbox placement test reports that are available for your account, regardless of whether or not those tests are complete.
A request to list all of the predictive inbox placement tests that you've performed.
A list of dedicated IP pools.
A request to obtain a list of dedicated IP pools.
The following elements are returned by the service.
Represents a request to list the existing custom verification email templates for your account.
Lists the contacts present in a specific contact list.
Lists the contacts present in a specific contact list.
Lists all of the contact lists available. If your output includes a "NextToken" field with a string value, this indicates there may be additional contacts on the filtered list - regardless of the number of contacts returned.
Lists all of the contact lists available. If your output includes a "NextToken" field with a string value, this indicates there may be additional contacts on the filtered list - regardless of the number of contacts returned.
A list of configuration sets in your Amazon SES account in the current Amazon Web Services Region.
A request to obtain a list of configuration sets for your Amazon SES account in the current Amazon Web Services Region.
Information about a specific tenant.
Represents a request to get information about a specific tenant.
Information about the suppressed email address.
A request to retrieve information about an email address that's on the suppression list for your account.
Information about the requested reputation entity.
Represents a request to retrieve information about a specific reputation entity.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to display the multi-region endpoint (global-endpoint).
Information about a message.
A request to return information about a message.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request for information about an import job using the import job ID.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to retrieve information about an export job using the export job ID.
The following element is returned by the service.
Represents a request to display the template object (which includes the subject line, HTML part and text part) for the template you specify.
Details about an email identity.
A request to return details about an email identity.
Identity policies associated with email identity.
A request to return the policies of an email identity.
Validation insights about an email address.
A request to return validation insights about an email address.
An object that includes statistics that are related to the domain that you specified.
A request to obtain deliverability metrics for a domain.
An object that contains all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for.
Retrieve all the deliverability data for a specific campaign. This data is available for a campaign only if the campaign sent email by using a domain that the Deliverability dashboard is enabled for (PutDeliverabilityDashboardOption operation).
The results of the predictive inbox placement test.
A request to retrieve the results of a predictive inbox placement test.
An object that shows the status of the Deliverability dashboard.
Retrieve information about the status of the Deliverability dashboard for your Amazon Web Services account. When the Deliverability dashboard is enabled, you gain access to reputation, deliverability, and other metrics for your domains. You also gain the ability to perform predictive inbox placement tests. When you use the Deliverability dashboard, you pay a monthly subscription charge, in addition to any other fees that you accrue by using Amazon SES and other Amazon Web Services services. For more information about the features and cost of a Deliverability dashboard subscription, see Amazon Pinpoint Pricing.
Information about the dedicated IP addresses that are associated with your Amazon Web Services account.
A request to obtain more information about dedicated IP pools.
Information about a dedicated IP address.
A request to obtain more information about a dedicated IP address.
The following element is returned by the service.
A request to obtain more information about a dedicated IP pool.
The following elements are returned by the service.
Represents a request to retrieve an existing custom verification email template.
Returns a contact from a contact list.
Returns a contact from a contact list.
Returns contact list metadata. It does not return any information about the contacts present in the list.
Returns contact list metadata. It does not return any information about the contacts present in the list.
Information about a configuration set.
A request to obtain information about a configuration set.
Information about an event destination for a configuration set.
A request to obtain information about the event destinations for a configuration set.
An object that contains information about blacklist events.
A request to retrieve a list of the blacklists that your dedicated IP addresses appear on.
A list of details about the email-sending capabilities of your Amazon SES account in the current Amazon Web Services Region.
A request to obtain information about the email-sending capabilities of your Amazon SES account.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to delete an association between a tenant and a resource.
Represents a request to delete a tenant.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to remove an email address from the suppression list for your account.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to delete a multi-region endpoint (global-endpoint).
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to delete an email template. For more information, see the Amazon SES Developer Guide.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to delete an existing email identity. When you delete an identity, you lose the ability to send email from that identity. You can restore your ability to send email by completing the verification process for the identity again.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to delete a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to delete a dedicated IP pool.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to delete an existing custom verification email template.
Removes a contact from a contact list.
Removes a contact from a contact list.
Deletes a contact list and all of the contacts on that list.
Deletes a contact list and all of the contacts on that list.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to delete a configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to delete an event destination from a configuration set.
Information about a newly created tenant.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to associate a resource with a tenant. Resources can be email identities, configuration sets, or email templates. When you associate a resource with a tenant, you can use that resource when sending emails on behalf of that tenant.
Represents a request to create a tenant. Tenants are logical containers that group related SES resources together. Each tenant can have its own set of resources like email identities, configuration sets, and templates, along with reputation metrics and sending status. This helps isolate and manage email sending for different customers or business units within your Amazon SES API v2 account.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to create a multi-region endpoint (global-endpoint).
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to create an import job from a data source for a data destination.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to create an export job from a data source to a data destination.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to create an email template. For more information, see the Amazon SES Developer Guide.
If the email identity is a domain, this object contains information about the DKIM verification status for the domain. If the email identity is an email address, this object is empty.
A request to begin the verification process for an email identity (an email address or domain).
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to create a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.
Information about the predictive inbox placement test that you created.
A request to perform a predictive inbox placement test. Predictive inbox placement tests can help you predict how your messages will be handled by various email providers around the world. When you perform a predictive inbox placement test, you provide a sample message that contains the content that you plan to send to your customers. We send that message to special email addresses spread across several major email providers around the world. The test takes about 24 hours to complete. When the test is complete, you can use the GetDeliverabilityTestReport operation to view the results of the test.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to create a new dedicated IP pool.
If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.
Represents a request to create a custom verification email template.
Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.
Creates a contact, which is an end-user who is receiving the email, and adds them to a contact list.
Creates a contact list.
Creates a contact list.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to create a configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
A request to add an event destination to a configuration set.
An HTTP 200 response if the request succeeds, or an error message if the request fails.
Represents a request to cancel an export job using the export job ID.
Represents the result of processing your metric data batch request
Represents a request to retrieve a batch of metric data.