Values.UpdateSiteRackPhysicalPropertiesInputSourceUpdate the physical and logistical details for a rack at a site. For more information about hardware requirements for racks, see Network readiness checklist in the Amazon Web Services Outposts User Guide. To update a rack at a site with an order of IN_PROGRESS, you must wait for the order to complete or cancel the order.
type nonrec t = {siteId : SiteId.t;The ID or the Amazon Resource Name (ARN) of the site.
*)powerDrawKva : PowerDrawKva.t option;The power draw, in kVA, available at the hardware placement position for the rack.
*)powerPhase : PowerPhase.t option;The power option that you can provide for hardware. Single-phase AC feed: 200 V to 277 V, 50 Hz or 60 Hz Three-phase AC feed: 346 V to 480 V, 50 Hz or 60 Hz
*)powerConnector : PowerConnector.t option;The power connector that Amazon Web Services should plan to provide for connections to the hardware. Note the correlation between PowerPhase and PowerConnector. Single-phase AC feed L6-30P – (common in US); 30A; single phase IEC309 (blue) – P+N+E, 6hr; 32 A; single phase Three-phase AC feed AH530P7W (red) – 3P+N+E, 7hr; 30A; three phase AH532P6W (red) – 3P+N+E, 6hr; 32A; three phase CS8365C – (common in US); 3P+E, 50A; three phase
*)powerFeedDrop : PowerFeedDrop.t option;Indicates whether the power feed comes above or below the rack.
*)uplinkGbps : UplinkGbps.t option;The uplink speed the rack should support for the connection to the Region.
*)uplinkCount : UplinkCount.t option;Racks come with two Outpost network devices. Depending on the supported uplink speed at the site, the Outpost network devices provide a variable number of uplinks. Specify the number of uplinks for each Outpost network device that you intend to use to connect the rack to your network. Note the correlation between UplinkGbps and UplinkCount. 1Gbps - Uplinks available: 1, 2, 4, 6, 8 10Gbps - Uplinks available: 1, 2, 4, 8, 12, 16 40 and 100 Gbps- Uplinks available: 1, 2, 4
*)fiberOpticCableType : FiberOpticCableType.t option;The type of fiber that you will use to attach the Outpost to your network.
*)opticalStandard : OpticalStandard.t option;The type of optical standard that you will use to attach the Outpost to your network. This field is dependent on uplink speed, fiber type, and distance to the upstream device. For more information about networking requirements for racks, see Network in the Amazon Web Services Outposts User Guide. OPTIC_10GBASE_SR: 10GBASE-SR OPTIC_10GBASE_IR: 10GBASE-IR OPTIC_10GBASE_LR: 10GBASE-LR OPTIC_40GBASE_SR: 40GBASE-SR OPTIC_40GBASE_ESR: 40GBASE-ESR OPTIC_40GBASE_IR4_LR4L: 40GBASE-IR (LR4L) OPTIC_40GBASE_LR4: 40GBASE-LR4 OPTIC_100GBASE_SR4: 100GBASE-SR4 OPTIC_100GBASE_CWDM4: 100GBASE-CWDM4 OPTIC_100GBASE_LR4: 100GBASE-LR4 OPTIC_100G_PSM4_MSA: 100G PSM4 MSA OPTIC_1000BASE_LX: 1000Base-LX OPTIC_1000BASE_SX : 1000Base-SX
*)maximumSupportedWeightLbs : MaximumSupportedWeightLbs.t option;The maximum rack weight that this site can support. NO_LIMIT is over 2000lbs.
*)}