Module Awso_waf_regional.ValuesSource

Sourceval service : Awso.Service.t
Sourceval apiVersion : string
Sourceval endpointPrefix : string
Sourceval serviceFullName : string
Sourceval signatureVersion : string
Sourceval protocol : string
Sourceval globalEndpoint : string
Sourceval serviceAbbreviation : string
Sourceval targetPrefix : string
Sourceval simple_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval composed_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval to_query : ('a -> Awso.Client.Query.value) -> 'a -> Awso.Client.Query.t
Sourceval structure_to_value_aux : ('a * 'b option) list -> f:(('a * 'b) list -> 'c) -> [> `Structure of 'c ]
Sourceval structure_to_value : ('a * 'b option) list -> [> `Structure of ('a * 'b) list ]
Sourceval structure_to_wrapped_value : wrapper:'a -> response:'a -> ('b * 'c option) list -> [> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]
Sourcemodule ResourceId : sig ... end
Sourcemodule HeaderName : sig ... end
Sourcemodule HeaderValue : sig ... end
Sourcemodule MatchFieldData : sig ... end
Sourcemodule MatchFieldType : sig ... end
Sourcemodule ExcludedRule : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The rule to exclude from a rule group. This is applicable only when the ActivatedRule refers to a RuleGroup. The rule must belong to the RuleGroup that is specified by the ActivatedRule.

Sourcemodule WafActionType : sig ... end
Sourcemodule WafOverrideActionType : sig ... end
Sourcemodule HTTPHeader : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The response from a GetSampledRequests request includes an HTTPHeader complex type that appears as Headers in the response syntax. HTTPHeader contains the names and values of all of the headers that appear in one of the web requests that were returned by GetSampledRequests.

Sourcemodule FieldToMatch : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies where in a web request to look for TargetString.

Sourcemodule TextTransformation : sig ... end
Sourcemodule ExcludedRules : sig ... end
Sourcemodule RulePriority : sig ... end
Sourcemodule WafAction : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. For the action that is associated with a rule in a WebACL, specifies the action that you want AWS WAF to perform when a web request matches all of the conditions in a rule. For the default action in a WebACL, specifies the action that you want AWS WAF to take when a web request doesn't match all of the conditions in any of the rules in a WebACL.

Sourcemodule WafOverrideAction : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The action to take if any rule within the RuleGroup matches a request.

Sourcemodule WafRuleType : sig ... end
Sourcemodule ComparisonOperator : sig ... end
Sourcemodule Size : sig ... end
Sourcemodule Negated : sig ... end
Sourcemodule PredicateType : sig ... end
Sourcemodule IPSetDescriptorType : sig ... end
Sourcemodule IPSetDescriptorValue : sig ... end
Sourcemodule GeoMatchConstraintType : sig ... end
Sourcemodule GeoMatchConstraintValue : sig ... end
Sourcemodule ByteMatchTargetString : sig ... end
Sourcemodule PositionalConstraint : sig ... end
Sourcemodule TagKey : sig ... end
Sourcemodule TagValue : sig ... end
Sourcemodule ResourceArn : sig ... end
Sourcemodule Country : sig ... end
Sourcemodule HTTPHeaders : sig ... end
Sourcemodule HTTPMethod : sig ... end
Sourcemodule HTTPVersion : sig ... end
Sourcemodule IPString : sig ... end
Sourcemodule URIString : sig ... end
Sourcemodule ChangeAction : sig ... end
Sourcemodule XssMatchTuple : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the part of a web request that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header.

Sourcemodule ActivatedRule : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The ActivatedRule object in an UpdateWebACL request specifies a Rule that you want to insert or delete, the priority of the Rule in the WebACL, and the action that you want AWS WAF to take when a web request matches the Rule (ALLOW, BLOCK, or COUNT). To specify whether to insert or delete a Rule, use the Action parameter in the WebACLUpdate data type.

Sourcemodule SqlInjectionMatchTuple : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the part of a web request that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header.

Sourcemodule SizeConstraint : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies a constraint on the size of a part of the web request. AWS WAF uses the Size, ComparisonOperator, and FieldToMatch to build an expression in the form of "Size ComparisonOperator size in bytes of FieldToMatch". If that expression is true, the SizeConstraint is considered to match.

Sourcemodule Predicate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, and SizeConstraintSet objects that you want to add to a Rule and, for each object, indicates whether you want to negate the settings, for example, requests that do NOT originate from the IP address 192.0.2.44.

Sourcemodule RegexPatternString : sig ... end
Sourcemodule RegexMatchTuple : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The regular expression pattern that you want AWS WAF to search for in web requests, the location in requests that you want AWS WAF to search, and other settings. Each RegexMatchTuple object contains: The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the User-Agent header. The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet. Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.

Sourcemodule IPSetDescriptor : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the IP address type (IPV4 or IPV6) and the IP address range (in CIDR format) that web requests originate from.

Sourcemodule GeoMatchConstraint : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The country from which web requests originate that you want AWS WAF to search for.

Sourcemodule ByteMatchTuple : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to search for in web requests, the location in requests that you want AWS WAF to search, and other settings.

Sourcemodule ResourceName : sig ... end
Sourcemodule Tag : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A tag associated with an AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

Sourcemodule MetricName : sig ... end
Sourcemodule LogDestinationConfigs : sig ... end
Sourcemodule RedactedFields : sig ... end
Sourcemodule Action : sig ... end
Sourcemodule HTTPRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The response from a GetSampledRequests request includes an HTTPRequest complex type that appears as Request in the response syntax. HTTPRequest contains information about one of the web requests that were returned by GetSampledRequests.

Sourcemodule SampleWeight : sig ... end
Sourcemodule Timestamp : sig ... end
Sourcemodule ErrorMessage : sig ... end
Sourcemodule ParameterExceptionField : sig ... end
Sourcemodule ParameterExceptionReason : sig ... end
Sourcemodule XssMatchSetUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the part of a web request that you want to inspect for cross-site scripting attacks and indicates whether you want to add the specification to an XssMatchSet or delete it from an XssMatchSet.

Sourcemodule WebACLUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies whether to insert a Rule into or delete a Rule from a WebACL.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the part of a web request that you want to inspect for snippets of malicious SQL code and indicates whether you want to add the specification to a SqlInjectionMatchSet or delete it from a SqlInjectionMatchSet.

Sourcemodule SizeConstraintSetUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the part of a web request that you want to inspect the size of and indicates whether you want to add the specification to a SizeConstraintSet or delete it from a SizeConstraintSet.

Sourcemodule RuleUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies a Predicate (such as an IPSet) and indicates whether you want to add it to a Rule or delete it from a Rule.

Sourcemodule RuleGroupUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies an ActivatedRule and indicates whether you want to add it to a RuleGroup or delete it from a RuleGroup.

Sourcemodule RegexPatternSetUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. In an UpdateRegexPatternSet request, RegexPatternSetUpdate specifies whether to insert or delete a RegexPatternString and includes the settings for the RegexPatternString.

Sourcemodule RegexMatchSetUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. In an UpdateRegexMatchSet request, RegexMatchSetUpdate specifies whether to insert or delete a RegexMatchTuple and includes the settings for the RegexMatchTuple.

Sourcemodule IPSetUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the type of update to perform to an IPSet with UpdateIPSet.

Sourcemodule GeoMatchSetUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Specifies the type of update to perform to an GeoMatchSet with UpdateGeoMatchSet.

Sourcemodule ByteMatchSetUpdate : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. In an UpdateByteMatchSet request, ByteMatchSetUpdate specifies whether to insert or delete a ByteMatchTuple and includes the settings for the ByteMatchTuple.

Sourcemodule XssMatchSetSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The Id and Name of an XssMatchSet.

Sourcemodule WebACLSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains the identifier and the name or description of the WebACL.

Sourcemodule TagList : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A summary of the rule groups you are subscribed to.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The Id and Name of a SqlInjectionMatchSet.

Sourcemodule SizeConstraintSetSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The Id and Name of a SizeConstraintSet.

Sourcemodule RuleSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains the identifier and the friendly name or description of the Rule.

Sourcemodule RuleGroupSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains the identifier and the friendly name or description of the RuleGroup.

Sourcemodule RegexPatternSetSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returned by ListRegexPatternSets. Each RegexPatternSetSummary object includes the Name and RegexPatternSetId for one RegexPatternSet.

Sourcemodule RegexMatchSetSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returned by ListRegexMatchSets. Each RegexMatchSetSummary object includes the Name and RegexMatchSetId for one RegexMatchSet.

Sourcemodule LoggingConfiguration : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The Amazon Kinesis Data Firehose, RedactedFields information, and the web ACL Amazon Resource Name (ARN).

Sourcemodule IPSetSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains the identifier and the name of the IPSet.

Sourcemodule GeoMatchSetSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains the identifier and the name of the GeoMatchSet.

Sourcemodule ByteMatchSetSummary : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returned by ListByteMatchSets. Each ByteMatchSetSummary object includes the Name and ByteMatchSetId for one ByteMatchSet.

Sourcemodule XssMatchTuples : sig ... end
Sourcemodule ActivatedRules : sig ... end
Sourcemodule SqlInjectionMatchTuples : sig ... end
Sourcemodule SizeConstraints : sig ... end
Sourcemodule SampledHTTPRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The response from a GetSampledRequests request includes a SampledHTTPRequests complex type that appears as SampledRequests in the response syntax. SampledHTTPRequests contains one SampledHTTPRequest object for each web request that is returned by GetSampledRequests.

Sourcemodule Predicates : sig ... end
Sourcemodule RegexPatternStrings : sig ... end
Sourcemodule RegexMatchTuples : sig ... end
Sourcemodule RateKey : sig ... end
Sourcemodule RateLimit : sig ... end
Sourcemodule ManagedKey : sig ... end
Sourcemodule IPSetDescriptors : sig ... end
Sourcemodule GeoMatchConstraints : sig ... end
Sourcemodule ByteMatchTuples : sig ... end
Sourcemodule ErrorReason : sig ... end
Sourcemodule MigrationErrorType : sig ... end
Sourcemodule ChangeToken : sig ... end
Sourcemodule WAFInternalErrorException : sig ... end

The operation failed because of a system problem, even though the request was valid. Retry your request.

The operation failed because you tried to create, update, or delete an object by using an invalid account identifier.

The operation failed because there was nothing to do. For example: You tried to remove a Rule from a WebACL, but the Rule isn't in the specified WebACL. You tried to remove an IP address from an IPSet, but the IP address isn't in the specified IPSet. You tried to remove a ByteMatchTuple from a ByteMatchSet, but the ByteMatchTuple isn't in the specified WebACL. You tried to add a Rule to a WebACL, but the Rule already exists in the specified WebACL. You tried to add a ByteMatchTuple to a ByteMatchSet, but the ByteMatchTuple already exists in the specified WebACL.

The operation failed because AWS WAF didn't recognize a parameter in the request. For example: You specified an invalid parameter name. You specified an invalid value. You tried to update an object (ByteMatchSet, IPSet, Rule, or WebACL) using an action other than INSERT or DELETE. You tried to create a WebACL with a DefaultAction Type other than ALLOW, BLOCK, or COUNT. You tried to create a RateBasedRule with a RateKey value other than IP. You tried to update a WebACL with a WafAction Type other than ALLOW, BLOCK, or COUNT. You tried to update a ByteMatchSet with a FieldToMatch Type other than HEADER, METHOD, QUERY_STRING, URI, or BODY. You tried to update a ByteMatchSet with a Field of HEADER but no value for Data. Your request references an ARN that is malformed, or corresponds to a resource with which a web ACL cannot be associated.

The operation exceeds a resource limit, for example, the maximum number of WebACL objects that you can create for an AWS account. For more information, see Limits in the AWS WAF Developer Guide.

The operation failed because you tried to add an object to or delete an object from another object that doesn't exist. For example: You tried to add a Rule to or delete a Rule from a WebACL that doesn't exist. You tried to add a ByteMatchSet to or delete a ByteMatchSet from a Rule that doesn't exist. You tried to add an IP address to or delete an IP address from an IPSet that doesn't exist. You tried to add a ByteMatchTuple to or delete a ByteMatchTuple from a ByteMatchSet that doesn't exist.

The operation failed because the referenced object doesn't exist.

Sourcemodule WAFStaleDataException : sig ... end

The operation failed because you tried to create, update, or delete an object by using a change token that has already been used.

Sourcemodule XssMatchSetUpdates : sig ... end

The operation failed because you tried to delete an object that is still in use. For example: You tried to delete a ByteMatchSet that is still referenced by a Rule. You tried to delete a Rule that is still referenced by a WebACL.

The specified subscription does not exist.

Sourcemodule WebACLUpdates : sig ... end
Sourcemodule SizeConstraintSetUpdates : sig ... end
Sourcemodule RuleUpdates : sig ... end
Sourcemodule RuleGroupUpdates : sig ... end

The regular expression (regex) you specified in RegexPatternString is invalid.

Sourcemodule RegexPatternSetUpdates : sig ... end

The name specified is invalid.

Sourcemodule RegexMatchSetUpdates : sig ... end
Sourcemodule IPSetUpdates : sig ... end
Sourcemodule GeoMatchSetUpdates : sig ... end
Sourcemodule ByteMatchSetUpdates : sig ... end
Sourcemodule WAFBadRequestException : sig ... end
Sourcemodule WAFTagOperationException : sig ... end
Sourcemodule TagKeyList : sig ... end

The operation failed because the specified policy is not in the proper format. The policy is subject to the following restrictions: You can attach only one policy with each PutPermissionPolicy request. The policy must include an Effect, Action and Principal. Effect must specify Allow. The Action in the policy must be waf:UpdateWebACL, waf-regional:UpdateWebACL, waf:GetRuleGroup and waf-regional:GetRuleGroup . Any extra or wildcard actions in the policy will be rejected. The policy cannot include a Resource parameter. The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region. The user making the request must be the owner of the RuleGroup. Your policy must be composed using IAM Policy version 2012-10-17.

Sourcemodule PolicyString : sig ... end

AWS WAF is not able to access the service linked role. This can be caused by a previous PutLoggingConfiguration request, which can lock the service linked role for about 20 seconds. Please try your request again. The service linked role can also be locked by a previous DeleteServiceLinkedRole request, which can lock the role for 15 minutes or more. If you recently made a DeleteServiceLinkedRole, wait at least 15 minutes and try the request again. If you receive this same exception again, you will have to wait additional time until the role is unlocked.

Sourcemodule NextMarker : sig ... end
Sourcemodule XssMatchSetSummaries : sig ... end
Sourcemodule PaginationLimit : sig ... end
Sourcemodule WebACLSummaries : sig ... end
Sourcemodule TagInfoForResource : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Information for a tag associated with an AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

Sourcemodule RuleSummaries : sig ... end
Sourcemodule RuleGroupSummaries : sig ... end
Sourcemodule ResourceArns : sig ... end
Sourcemodule ResourceType : sig ... end
Sourcemodule RegexPatternSetSummaries : sig ... end
Sourcemodule RegexMatchSetSummaries : sig ... end
Sourcemodule LoggingConfigurations : sig ... end
Sourcemodule IPSetSummaries : sig ... end
Sourcemodule GeoMatchSetSummaries : sig ... end
Sourcemodule ByteMatchSetSummaries : sig ... end
Sourcemodule XssMatchSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A complex type that contains XssMatchTuple objects, which specify the parts of web requests that you want AWS WAF to inspect for cross-site scripting attacks and, if you want AWS WAF to inspect a header, the name of the header. If a XssMatchSet contains more than one XssMatchTuple object, a request needs to include cross-site scripting attacks in only one of the specified parts of the request to be considered a match.

Sourcemodule WebACL : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains the Rules that identify the requests that you want to allow, block, or count. In a WebACL, you also specify a default action (ALLOW or BLOCK), and the action for each Rule that you add to a WebACL, for example, block requests from specified IP addresses or block requests from specified referrers. You also associate the WebACL with a CloudFront distribution to identify the requests that you want AWS WAF to filter. If you add more than one Rule to a WebACL, a request needs to match only one of the specifications to be allowed, blocked, or counted. For more information, see UpdateWebACL.

The operation failed because the entity referenced is temporarily unavailable. Retry your request.

Sourcemodule SqlInjectionMatchSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A complex type that contains SqlInjectionMatchTuple objects, which specify the parts of web requests that you want AWS WAF to inspect for snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the name of the header. If a SqlInjectionMatchSet contains more than one SqlInjectionMatchTuple object, a request needs to include snippets of SQL code in only one of the specified parts of the request to be considered a match.

Sourcemodule SizeConstraintSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A complex type that contains SizeConstraint objects, which specify the parts of web requests that you want AWS WAF to inspect the size of. If a SizeConstraintSet contains more than one SizeConstraint object, a request only needs to match one constraint to be considered a match.

Sourcemodule PopulationSize : sig ... end
Sourcemodule SampledHTTPRequests : sig ... end
Sourcemodule TimeWindow : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. In a GetSampledRequests request, the StartTime and EndTime objects specify the time range for which you want AWS WAF to return a sample of web requests. You must specify the times in Coordinated Universal Time (UTC) format. UTC format includes the special designator, Z. For example, "2016-09-27T14:50Z". In a GetSampledRequests response, the StartTime and EndTime objects specify the time range for which AWS WAF actually returned a sample of web requests. AWS WAF gets the specified number of requests from among the first 5,000 requests that your AWS resource receives during the specified time period. If your resource receives more than 5,000 requests during that period, AWS WAF stops sampling after the 5,000th request. In that case, EndTime is the time that AWS WAF received the 5,000th request.

Sourcemodule Rule : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A combination of ByteMatchSet, IPSet, and/or SqlInjectionMatchSet objects that identify the web requests that you want to allow, block, or count. For example, you might create a Rule that includes the following predicates: An IPSet that causes AWS WAF to search for web requests that originate from the IP address 192.0.2.44 A ByteMatchSet that causes AWS WAF to search for web requests for which the value of the User-Agent header is BadBot. To match the settings in this Rule, a request must originate from 192.0.2.44 AND include a User-Agent header for which the value is BadBot.

Sourcemodule RuleGroup : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A collection of predefined rules that you can add to a web ACL. Rule groups are subject to the following limits: Three rule groups per account. You can request an increase to this limit by contacting customer support. One rule group per web ACL. Ten rules per rule group.

Sourcemodule RegexPatternSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. The RegexPatternSet specifies the regular expression (regex) pattern that you want AWS WAF to search for, such as B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests.

Sourcemodule RegexMatchSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. In a GetRegexMatchSet request, RegexMatchSet is a complex type that contains the RegexMatchSetId and Name of a RegexMatchSet, and the values that you specified when you updated the RegexMatchSet. The values are contained in a RegexMatchTuple object, which specify the parts of web requests that you want AWS WAF to inspect and the values that you want AWS WAF to search for. If a RegexMatchSet contains more than one RegexMatchTuple object, a request needs to match the settings in only one ByteMatchTuple to be considered a match.

Sourcemodule RateBasedRule : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. A RateBasedRule is identical to a regular Rule, with one addition: a RateBasedRule counts the number of requests that arrive from a specified IP address every five minutes. For example, based on recent requests that you've seen from an attacker, you might create a RateBasedRule that includes the following conditions: The requests come from 192.0.2.44. They contain the value BadBot in the User-Agent header. In the rule, you also define the rate limit as 1,000. Requests that meet both of these conditions and exceed 1,000 requests every five minutes trigger the rule's action (block or count), which is defined in the web ACL.

Sourcemodule ManagedKeys : sig ... end
Sourcemodule IPSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains one or more IP addresses or blocks of IP addresses specified in Classless Inter-Domain Routing (CIDR) notation. AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. To specify an individual IP address, you specify the four-part IP address followed by a /32, for example, 192.0.2.0/32. To block a range of IP addresses, you can specify /8 or any range between /16 through /32 (for IPv4) or /24, /32, /48, /56, /64, or /128 (for IPv6). For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.

Sourcemodule GeoMatchSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Contains one or more countries that AWS WAF will search for.

Sourcemodule ChangeTokenStatus : sig ... end
Sourcemodule ByteMatchSet : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. In a GetByteMatchSet request, ByteMatchSet is a complex type that contains the ByteMatchSetId and Name of a ByteMatchSet, and the values that you specified when you updated the ByteMatchSet. A complex type that contains ByteMatchTuple objects, which specify the parts of web requests that you want AWS WAF to inspect and the values that you want AWS WAF to search for. If a ByteMatchSet contains more than one ByteMatchTuple object, a request needs to match the settings in only one ByteMatchTuple to be considered a match.

The operation failed because you tried to delete an object that isn't empty. For example: You tried to delete a WebACL that still contains one or more Rule objects. You tried to delete a Rule that still contains one or more ByteMatchSet objects or other predicates. You tried to delete a ByteMatchSet that contains one or more ByteMatchTuple objects. You tried to delete an IPSet that references one or more IP addresses.

Sourcemodule S3ObjectUrl : sig ... end

The operation failed due to a problem with the migration. The failure cause is provided in the exception, in the MigrationErrorType: ENTITY_NOT_SUPPORTED - The web ACL has an unsupported entity but the IgnoreUnsupportedType is not set to true. ENTITY_NOT_FOUND - The web ACL doesn't exist. S3_BUCKET_NO_PERMISSION - You don't have permission to perform the PutObject action to the specified Amazon S3 bucket. S3_BUCKET_NOT_ACCESSIBLE - The bucket policy doesn't allow AWS WAF to perform the PutObject action in the bucket. S3_BUCKET_NOT_FOUND - The S3 bucket doesn't exist. S3_BUCKET_INVALID_REGION - The S3 bucket is not in the same Region as the web ACL. S3_INTERNAL_ERROR - AWS WAF failed to create the template in the S3 bucket for another reason.

Sourcemodule IgnoreUnsupportedType : sig ... end
Sourcemodule S3BucketName : sig ... end
Sourcemodule UpdateXssMatchSetResponse : sig ... end

The response to an UpdateXssMatchSets request.

Sourcemodule UpdateXssMatchSetRequest : sig ... end

A request to update an XssMatchSet.

Sourcemodule UpdateWebACLResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes ActivatedRule objects in a WebACL. Each Rule identifies web requests that you want to allow, block, or count. When you update a WebACL, you specify the following values: A default action for the WebACL, either ALLOW or BLOCK. AWS WAF performs the default action if a request doesn't match the criteria in any of the Rules in a WebACL. The Rules that you want to add or delete. If you want to replace one Rule with another, you delete the existing Rule and add the new one. For each Rule, whether you want AWS WAF to allow requests, block requests, or count requests that match the conditions in the Rule. The order in which you want AWS WAF to evaluate the Rules in a WebACL. If you add more than one Rule to a WebACL, AWS WAF evaluates each request against the Rules in order based on the value of Priority. (The Rule that has the lowest value for Priority is evaluated first.) When a web request matches all the predicates (such as ByteMatchSets and IPSets) in a Rule, AWS WAF immediately takes the corresponding action, allow or block, and doesn't evaluate the request against the remaining Rules in the WebACL, if any. To create and configure a WebACL, perform the following steps: Create and update the predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule. Create a WebACL. See CreateWebACL. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request. Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution. The ActivatedRule can be a rule group. If you specify a rule group as your ActivatedRule , you can exclude specific rules from that rule group. If you already have a rule group associated with a web ACL and want to submit an UpdateWebACL request to exclude certain rules from that rule group, you must first remove the rule group from the web ACL, the re-insert it again, specifying the excluded rules. For details, see ActivatedRule$ExcludedRules . Be aware that if you try to add a RATE_BASED rule to a web ACL without setting the rule type when first creating the rule, the UpdateWebACL request will fail because the request tries to add a REGULAR rule (the default rule type) with the specified ID, which does not exist. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateWebACLRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes ActivatedRule objects in a WebACL. Each Rule identifies web requests that you want to allow, block, or count. When you update a WebACL, you specify the following values: A default action for the WebACL, either ALLOW or BLOCK. AWS WAF performs the default action if a request doesn't match the criteria in any of the Rules in a WebACL. The Rules that you want to add or delete. If you want to replace one Rule with another, you delete the existing Rule and add the new one. For each Rule, whether you want AWS WAF to allow requests, block requests, or count requests that match the conditions in the Rule. The order in which you want AWS WAF to evaluate the Rules in a WebACL. If you add more than one Rule to a WebACL, AWS WAF evaluates each request against the Rules in order based on the value of Priority. (The Rule that has the lowest value for Priority is evaluated first.) When a web request matches all the predicates (such as ByteMatchSets and IPSets) in a Rule, AWS WAF immediately takes the corresponding action, allow or block, and doesn't evaluate the request against the remaining Rules in the WebACL, if any. To create and configure a WebACL, perform the following steps: Create and update the predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule. Create a WebACL. See CreateWebACL. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request. Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution. The ActivatedRule can be a rule group. If you specify a rule group as your ActivatedRule , you can exclude specific rules from that rule group. If you already have a rule group associated with a web ACL and want to submit an UpdateWebACL request to exclude certain rules from that rule group, you must first remove the rule group from the web ACL, the re-insert it again, specifying the excluded rules. For details, see ActivatedRule$ExcludedRules . Be aware that if you try to add a RATE_BASED rule to a web ACL without setting the rule type when first creating the rule, the UpdateWebACL request will fail because the request tries to add a REGULAR rule (the default rule type) with the specified ID, which does not exist. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

The response to an UpdateSqlInjectionMatchSets request.

A request to update a SqlInjectionMatchSet.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes SizeConstraint objects (filters) in a SizeConstraintSet. For each SizeConstraint object, you specify the following values: Whether to insert or delete the object from the array. If you want to change a SizeConstraintSetUpdate object, you delete the existing object and add a new one. The part of a web request that you want AWS WAF to evaluate, such as the length of a query string or the length of the User-Agent header. Whether to perform any transformations on the request, such as converting it to lowercase, before checking its length. Note that transformations of the request body are not supported because the AWS resource forwards only the first 8192 bytes of your request to AWS WAF. You can only specify a single type of TextTransformation. A ComparisonOperator used for evaluating the selected part of the request against the specified Size, such as equals, greater than, less than, and so on. The length, in bytes, that you want AWS WAF to watch for in selected part of the request. The length is computed after applying the transformation. For example, you can add a SizeConstraintSetUpdate object that matches web requests in which the length of the User-Agent header is greater than 100 bytes. You can then configure AWS WAF to block those requests. To create and configure a SizeConstraintSet, perform the following steps: Create a SizeConstraintSet. For more information, see CreateSizeConstraintSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request. Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes SizeConstraint objects (filters) in a SizeConstraintSet. For each SizeConstraint object, you specify the following values: Whether to insert or delete the object from the array. If you want to change a SizeConstraintSetUpdate object, you delete the existing object and add a new one. The part of a web request that you want AWS WAF to evaluate, such as the length of a query string or the length of the User-Agent header. Whether to perform any transformations on the request, such as converting it to lowercase, before checking its length. Note that transformations of the request body are not supported because the AWS resource forwards only the first 8192 bytes of your request to AWS WAF. You can only specify a single type of TextTransformation. A ComparisonOperator used for evaluating the selected part of the request against the specified Size, such as equals, greater than, less than, and so on. The length, in bytes, that you want AWS WAF to watch for in selected part of the request. The length is computed after applying the transformation. For example, you can add a SizeConstraintSetUpdate object that matches web requests in which the length of the User-Agent header is greater than 100 bytes. You can then configure AWS WAF to block those requests. To create and configure a SizeConstraintSet, perform the following steps: Create a SizeConstraintSet. For more information, see CreateSizeConstraintSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request. Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateRuleResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes Predicate objects in a Rule. Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to allow, block, or count. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed, blocked, or counted. For example, suppose that you add the following to a Rule: A ByteMatchSet that matches the value BadBot in the User-Agent header An IPSet that matches the IP address 192.0.2.44 You then add the Rule to a WebACL and specify that you want to block requests that satisfy the Rule. For a request to be blocked, the User-Agent header in the request must contain the value BadBot and the request must originate from the IP address 192.0.2.44. To create and configure a Rule, perform the following steps: Create and update the predicates that you want to include in the Rule. Create the Rule. See CreateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request. Submit an UpdateRule request to add predicates to the Rule. Create and update a WebACL that contains the Rule. See CreateWebACL. If you want to replace one ByteMatchSet or IPSet with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateRuleRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes Predicate objects in a Rule. Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to allow, block, or count. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed, blocked, or counted. For example, suppose that you add the following to a Rule: A ByteMatchSet that matches the value BadBot in the User-Agent header An IPSet that matches the IP address 192.0.2.44 You then add the Rule to a WebACL and specify that you want to block requests that satisfy the Rule. For a request to be blocked, the User-Agent header in the request must contain the value BadBot and the request must originate from the IP address 192.0.2.44. To create and configure a Rule, perform the following steps: Create and update the predicates that you want to include in the Rule. Create the Rule. See CreateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request. Submit an UpdateRule request to add predicates to the Rule. Create and update a WebACL that contains the Rule. See CreateWebACL. If you want to replace one ByteMatchSet or IPSet with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateRuleGroupResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes ActivatedRule objects in a RuleGroup. You can only insert REGULAR rules into a rule group. You can have a maximum of ten rules per rule group. To create and configure a RuleGroup, perform the following steps: Create and update the Rules that you want to include in the RuleGroup. See CreateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRuleGroup request. Submit an UpdateRuleGroup request to add Rules to the RuleGroup. Create and update a WebACL that contains the RuleGroup. See CreateWebACL. If you want to replace one Rule with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateRuleGroupRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes ActivatedRule objects in a RuleGroup. You can only insert REGULAR rules into a rule group. You can have a maximum of ten rules per rule group. To create and configure a RuleGroup, perform the following steps: Create and update the Rules that you want to include in the RuleGroup. See CreateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRuleGroup request. Submit an UpdateRuleGroup request to add Rules to the RuleGroup. Create and update a WebACL that contains the RuleGroup. See CreateWebACL. If you want to replace one Rule with another, you delete the existing one and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes RegexPatternString objects in a RegexPatternSet. For each RegexPatternString object, you specify the following values: Whether to insert or delete the RegexPatternString. The regular expression pattern that you want to insert or delete. For more information, see RegexPatternSet. For example, you can create a RegexPatternString such as B[a@]dB[o0]t. AWS WAF will match this RegexPatternString to: BadBot BadB0t B@dBot B@dB0t To create and configure a RegexPatternSet, perform the following steps: Create a RegexPatternSet. For more information, see CreateRegexPatternSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request. Submit an UpdateRegexPatternSet request to specify the regular expression pattern that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes RegexPatternString objects in a RegexPatternSet. For each RegexPatternString object, you specify the following values: Whether to insert or delete the RegexPatternString. The regular expression pattern that you want to insert or delete. For more information, see RegexPatternSet. For example, you can create a RegexPatternString such as B[a@]dB[o0]t. AWS WAF will match this RegexPatternString to: BadBot BadB0t B@dBot B@dB0t To create and configure a RegexPatternSet, perform the following steps: Create a RegexPatternSet. For more information, see CreateRegexPatternSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request. Submit an UpdateRegexPatternSet request to specify the regular expression pattern that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes RegexMatchTuple objects (filters) in a RegexMatchSet. For each RegexMatchSetUpdate object, you specify the following values: Whether to insert or delete the object from the array. If you want to change a RegexMatchSetUpdate object, you delete the existing object and add a new one. The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the User-Agent header. The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet. Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string. For example, you can create a RegexPatternSet that matches any requests with User-Agent headers that contain the string B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps: Create a RegexMatchSet. For more information, see CreateRegexMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request. Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the identifier of the RegexPatternSet that contain the regular expression patters you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes RegexMatchTuple objects (filters) in a RegexMatchSet. For each RegexMatchSetUpdate object, you specify the following values: Whether to insert or delete the object from the array. If you want to change a RegexMatchSetUpdate object, you delete the existing object and add a new one. The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the User-Agent header. The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see RegexPatternSet. Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string. For example, you can create a RegexPatternSet that matches any requests with User-Agent headers that contain the string B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps: Create a RegexMatchSet. For more information, see CreateRegexMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request. Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the identifier of the RegexPatternSet that contain the regular expression patters you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes Predicate objects in a rule and updates the RateLimit in the rule. Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. The RateLimit specifies the number of requests every five minutes that triggers the rule. If you add more than one predicate to a RateBasedRule, a request must match all the predicates and exceed the RateLimit to be counted or blocked. For example, suppose you add the following to a RateBasedRule: An IPSet that matches the IP address 192.0.2.44/32 A ByteMatchSet that matches BadBot in the User-Agent header Further, you specify a RateLimit of 1,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions much be received at a rate of more than 1,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule: A ByteMatchSet with FieldToMatch of URI A PositionalConstraint of STARTS_WITH A TargetString of login Further, you specify a RateLimit of 1,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes Predicate objects in a rule and updates the RateLimit in the rule. Each Predicate object identifies a predicate, such as a ByteMatchSet or an IPSet, that specifies the web requests that you want to block or count. The RateLimit specifies the number of requests every five minutes that triggers the rule. If you add more than one predicate to a RateBasedRule, a request must match all the predicates and exceed the RateLimit to be counted or blocked. For example, suppose you add the following to a RateBasedRule: An IPSet that matches the IP address 192.0.2.44/32 A ByteMatchSet that matches BadBot in the User-Agent header Further, you specify a RateLimit of 1,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that satisfy the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions much be received at a rate of more than 1,000 every five minutes. If the rate drops below this limit, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule: A ByteMatchSet with FieldToMatch of URI A PositionalConstraint of STARTS_WITH A TargetString of login Further, you specify a RateLimit of 1,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site.

Sourcemodule UpdateIPSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes IPSetDescriptor objects in an IPSet. For each IPSetDescriptor object, you specify the following values: Whether to insert or delete the object from the array. If you want to change an IPSetDescriptor object, you delete the existing object and add a new one. The IP address version, IPv4 or IPv6. The IP address in CIDR notation, for example, 192.0.2.0/24 (for the range of IP addresses from 192.0.2.0 to 192.0.2.255) or 192.0.2.44/32 (for the individual IP address 192.0.2.44). AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing. IPv6 addresses can be represented using any of the following formats: 1111:0000:0000:0000:0000:0000:0000:0111/128 1111:0:0:0:0:0:0:0111/128 1111::0111/128 1111::111/128 You use an IPSet to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you're receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create an IPSet that specifies those IP addresses, and then configure AWS WAF to block the requests. To create and configure an IPSet, perform the following steps: Submit a CreateIPSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request. Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for. When you update an IPSet, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one. You can insert a maximum of 1000 addresses in a single request. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateIPSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes IPSetDescriptor objects in an IPSet. For each IPSetDescriptor object, you specify the following values: Whether to insert or delete the object from the array. If you want to change an IPSetDescriptor object, you delete the existing object and add a new one. The IP address version, IPv4 or IPv6. The IP address in CIDR notation, for example, 192.0.2.0/24 (for the range of IP addresses from 192.0.2.0 to 192.0.2.255) or 192.0.2.44/32 (for the individual IP address 192.0.2.44). AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing. IPv6 addresses can be represented using any of the following formats: 1111:0000:0000:0000:0000:0000:0000:0111/128 1111:0:0:0:0:0:0:0111/128 1111::0111/128 1111::111/128 You use an IPSet to specify which web requests you want to allow or block based on the IP addresses that the requests originated from. For example, if you're receiving a lot of requests from one or a small number of IP addresses and you want to block the requests, you can create an IPSet that specifies those IP addresses, and then configure AWS WAF to block the requests. To create and configure an IPSet, perform the following steps: Submit a CreateIPSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request. Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for. When you update an IPSet, you specify the IP addresses that you want to add and/or the IP addresses that you want to delete. If you want to change an IP address, you delete the existing IP address and add the new one. You can insert a maximum of 1000 addresses in a single request. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateGeoMatchSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes GeoMatchConstraint objects in an GeoMatchSet. For each GeoMatchConstraint object, you specify the following values: Whether to insert or delete the object from the array. If you want to change an GeoMatchConstraint object, you delete the existing object and add a new one. The Type. The only valid value for Type is Country. The Value, which is a two character code for the country to add to the GeoMatchConstraint object. Valid codes are listed in GeoMatchConstraint$Value. To create and configure an GeoMatchSet, perform the following steps: Submit a CreateGeoMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request. Submit an UpdateGeoMatchSet request to specify the country that you want AWS WAF to watch for. When you update an GeoMatchSet, you specify the country that you want to add and/or the country that you want to delete. If you want to change a country, you delete the existing country and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateGeoMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes GeoMatchConstraint objects in an GeoMatchSet. For each GeoMatchConstraint object, you specify the following values: Whether to insert or delete the object from the array. If you want to change an GeoMatchConstraint object, you delete the existing object and add a new one. The Type. The only valid value for Type is Country. The Value, which is a two character code for the country to add to the GeoMatchConstraint object. Valid codes are listed in GeoMatchConstraint$Value. To create and configure an GeoMatchSet, perform the following steps: Submit a CreateGeoMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request. Submit an UpdateGeoMatchSet request to specify the country that you want AWS WAF to watch for. When you update an GeoMatchSet, you specify the country that you want to add and/or the country that you want to delete. If you want to change a country, you delete the existing country and add the new one. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes ByteMatchTuple objects (filters) in a ByteMatchSet. For each ByteMatchTuple object, you specify the following values: Whether to insert or delete the object from the array. If you want to change a ByteMatchSetUpdate object, you delete the existing object and add a new one. The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the User-Agent header. The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify the values for the AWS WAF API and the AWS CLI or SDKs, see TargetString in the ByteMatchTuple data type. Where to look, such as at the beginning or the end of a query string. Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string. For example, you can add a ByteMatchSetUpdate object that matches web requests in which User-Agent headers contain the string BadBot. You can then configure AWS WAF to block those requests. To create and configure a ByteMatchSet, perform the following steps: Create a ByteMatchSet. For more information, see CreateByteMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request. Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UpdateByteMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Inserts or deletes ByteMatchTuple objects (filters) in a ByteMatchSet. For each ByteMatchTuple object, you specify the following values: Whether to insert or delete the object from the array. If you want to change a ByteMatchSetUpdate object, you delete the existing object and add a new one. The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the User-Agent header. The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify the values for the AWS WAF API and the AWS CLI or SDKs, see TargetString in the ByteMatchTuple data type. Where to look, such as at the beginning or the end of a query string. Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string. For example, you can add a ByteMatchSetUpdate object that matches web requests in which User-Agent headers contain the string BadBot. You can then configure AWS WAF to block those requests. To create and configure a ByteMatchSet, perform the following steps: Create a ByteMatchSet. For more information, see CreateByteMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request. Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule UntagResourceResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

Sourcemodule UntagResourceRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

Sourcemodule TagResourceResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Associates tags with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can use this action to tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

Sourcemodule TagResourceRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Associates tags with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can use this action to tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Attaches an IAM policy to the specified resource. The only supported use for this action is to share a RuleGroup across accounts. The PutPermissionPolicy is subject to the following restrictions: You can attach only one policy with each PutPermissionPolicy request. The policy must include an Effect, Action and Principal. Effect must specify Allow. The Action in the policy must be waf:UpdateWebACL, waf-regional:UpdateWebACL, waf:GetRuleGroup and waf-regional:GetRuleGroup . Any extra or wildcard actions in the policy will be rejected. The policy cannot include a Resource parameter. The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region. The user making the request must be the owner of the RuleGroup. Your policy must be composed using IAM Policy version 2012-10-17. For more information, see IAM Policies. An example of a valid policy parameter is shown in the Examples section below.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Attaches an IAM policy to the specified resource. The only supported use for this action is to share a RuleGroup across accounts. The PutPermissionPolicy is subject to the following restrictions: You can attach only one policy with each PutPermissionPolicy request. The policy must include an Effect, Action and Principal. Effect must specify Allow. The Action in the policy must be waf:UpdateWebACL, waf-regional:UpdateWebACL, waf:GetRuleGroup and waf-regional:GetRuleGroup . Any extra or wildcard actions in the policy will be rejected. The policy cannot include a Resource parameter. The ARN in the request must be a valid WAF RuleGroup ARN and the RuleGroup must exist in the same region. The user making the request must be the owner of the RuleGroup. Your policy must be composed using IAM Policy version 2012-10-17. For more information, see IAM Policies. An example of a valid policy parameter is shown in the Examples section below.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Associates a LoggingConfiguration with a specified web ACL. You can access information about all traffic that AWS WAF inspects using the following steps: Create an Amazon Kinesis Data Firehose. Create the data firehose with a PUT source and in the region that you are operating. However, if you are capturing logs for Amazon CloudFront, always create the firehose in US East (N. Virginia). Do not create the data firehose using a Kinesis stream as your source. Associate that firehose to your web ACL using a PutLoggingConfiguration request. When you successfully enable logging using a PutLoggingConfiguration request, AWS WAF will create a service linked role with the necessary permissions to write logs to the Amazon Kinesis Data Firehose. For more information, see Logging Web ACL Traffic Information in the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Associates a LoggingConfiguration with a specified web ACL. You can access information about all traffic that AWS WAF inspects using the following steps: Create an Amazon Kinesis Data Firehose. Create the data firehose with a PUT source and in the region that you are operating. However, if you are capturing logs for Amazon CloudFront, always create the firehose in US East (N. Virginia). Do not create the data firehose using a Kinesis stream as your source. Associate that firehose to your web ACL using a PutLoggingConfiguration request. When you successfully enable logging using a PutLoggingConfiguration request, AWS WAF will create a service linked role with the necessary permissions to write logs to the Amazon Kinesis Data Firehose. For more information, see Logging Web ACL Traffic Information in the AWS WAF Developer Guide.

Sourcemodule ListXssMatchSetsResponse : sig ... end

The response to a ListXssMatchSets request.

Sourcemodule ListXssMatchSetsRequest : sig ... end

A request to list the XssMatchSet objects created by the current AWS account.

Sourcemodule ListWebACLsResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of WebACLSummary objects in the response.

Sourcemodule ListWebACLsRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of WebACLSummary objects in the response.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Retrieves the tags associated with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Retrieves the tags associated with the specified AWS resource. Tags are key:value pairs that you can use to categorize and manage your resources, for purposes like billing. For example, you might set the tag key to "customer" and the value to the customer name or ID. You can specify one or more tags to add to each AWS resource, up to 50 tags for a resource. Tagging is only available through the API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic console. You can tag the AWS resources that you manage through AWS WAF Classic: web ACLs, rule groups, and rules.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleGroup objects that you are subscribed to.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleGroup objects that you are subscribed to.

The response to a ListSqlInjectionMatchSets request.

A request to list the SqlInjectionMatchSet objects created by the current AWS account.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of SizeConstraintSetSummary objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of SizeConstraintSetSummary objects.

Sourcemodule ListRulesResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleSummary objects.

Sourcemodule ListRulesRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleSummary objects.

Sourcemodule ListRuleGroupsResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleGroup objects.

Sourcemodule ListRuleGroupsRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleGroup objects.

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of resources associated with the specified web ACL.

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of resources associated with the specified web ACL.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RegexPatternSetSummary objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RegexPatternSetSummary objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RegexMatchSetSummary objects.

Sourcemodule ListRegexMatchSetsRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RegexMatchSetSummary objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleSummary objects.

Sourcemodule ListRateBasedRulesRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of RuleSummary objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of LoggingConfiguration objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of LoggingConfiguration objects.

Sourcemodule ListIPSetsResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of IPSetSummary objects in the response.

Sourcemodule ListIPSetsRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of IPSetSummary objects in the response.

Sourcemodule ListGeoMatchSetsResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of GeoMatchSetSummary objects in the response.

Sourcemodule ListGeoMatchSetsRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of GeoMatchSetSummary objects in the response.

Sourcemodule ListByteMatchSetsResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of ByteMatchSetSummary objects.

Sourcemodule ListByteMatchSetsRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of ByteMatchSetSummary objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of ActivatedRule objects.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of ActivatedRule objects.

Sourcemodule GetXssMatchSetResponse : sig ... end

The response to a GetXssMatchSet request.

Sourcemodule GetXssMatchSetRequest : sig ... end

A request to get an XssMatchSet.

Sourcemodule GetWebACLResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the WebACL that is specified by WebACLId.

Sourcemodule GetWebACLRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the WebACL that is specified by WebACLId.

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the web ACL for the specified resource, either an application load balancer or Amazon API Gateway stage.

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the web ACL for the specified resource, either an application load balancer or Amazon API Gateway stage.

The response to a GetSqlInjectionMatchSet request.

A request to get a SqlInjectionMatchSet.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the SizeConstraintSet specified by SizeConstraintSetId.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the SizeConstraintSet specified by SizeConstraintSetId.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Gets detailed information about a specified number of requests--a sample--that AWS WAF randomly selects from among the first 5,000 requests that your AWS resource received during a time range that you choose. You can specify a sample size of up to 500 requests, and you can specify any time range in the previous three hours. GetSampledRequests returns a time range, which is usually the time range that you specified. However, if your resource (such as a CloudFront distribution) received 5,000 requests before the specified time range elapsed, GetSampledRequests returns an updated time range. This new time range indicates the actual period during which AWS WAF selected the requests in the sample.

Sourcemodule GetSampledRequestsRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Gets detailed information about a specified number of requests--a sample--that AWS WAF randomly selects from among the first 5,000 requests that your AWS resource received during a time range that you choose. You can specify a sample size of up to 500 requests, and you can specify any time range in the previous three hours. GetSampledRequests returns a time range, which is usually the time range that you specified. However, if your resource (such as a CloudFront distribution) received 5,000 requests before the specified time range elapsed, GetSampledRequests returns an updated time range. This new time range indicates the actual period during which AWS WAF selected the requests in the sample.

Sourcemodule GetRuleResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the Rule that is specified by the RuleId that you included in the GetRule request.

Sourcemodule GetRuleRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the Rule that is specified by the RuleId that you included in the GetRule request.

Sourcemodule GetRuleGroupResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RuleGroup that is specified by the RuleGroupId that you included in the GetRuleGroup request. To view the rules in a rule group, use ListActivatedRulesInRuleGroup.

Sourcemodule GetRuleGroupRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RuleGroup that is specified by the RuleGroupId that you included in the GetRuleGroup request. To view the rules in a rule group, use ListActivatedRulesInRuleGroup.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RegexPatternSet specified by RegexPatternSetId.

Sourcemodule GetRegexPatternSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RegexPatternSet specified by RegexPatternSetId.

Sourcemodule GetRegexMatchSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RegexMatchSet specified by RegexMatchSetId.

Sourcemodule GetRegexMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RegexMatchSet specified by RegexMatchSetId.

Sourcemodule GetRateBasedRuleResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RateBasedRule that is specified by the RuleId that you included in the GetRateBasedRule request.

Sourcemodule GetRateBasedRuleRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the RateBasedRule that is specified by the RuleId that you included in the GetRateBasedRule request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of IP addresses currently being blocked by the RateBasedRule that is specified by the RuleId. The maximum number of managed keys that will be blocked is 10,000. If more than 10,000 addresses exceed the rate limit, the 10,000 addresses with the highest rates will be blocked.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns an array of IP addresses currently being blocked by the RateBasedRule that is specified by the RuleId. The maximum number of managed keys that will be blocked is 10,000. If more than 10,000 addresses exceed the rate limit, the 10,000 addresses with the highest rates will be blocked.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the IAM policy attached to the RuleGroup.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the IAM policy attached to the RuleGroup.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the LoggingConfiguration for the specified web ACL.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the LoggingConfiguration for the specified web ACL.

Sourcemodule GetIPSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the IPSet that is specified by IPSetId.

Sourcemodule GetIPSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the IPSet that is specified by IPSetId.

Sourcemodule GetGeoMatchSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the GeoMatchSet that is specified by GeoMatchSetId.

Sourcemodule GetGeoMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the GeoMatchSet that is specified by GeoMatchSetId.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the status of a ChangeToken that you got by calling GetChangeToken. ChangeTokenStatus is one of the following values: PROVISIONED: You requested the change token by calling GetChangeToken, but you haven't used it yet in a call to create, update, or delete an AWS WAF object. PENDING: AWS WAF is propagating the create, update, or delete request to all AWS WAF servers. INSYNC: Propagation is complete.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the status of a ChangeToken that you got by calling GetChangeToken. ChangeTokenStatus is one of the following values: PROVISIONED: You requested the change token by calling GetChangeToken, but you haven't used it yet in a call to create, update, or delete an AWS WAF object. PENDING: AWS WAF is propagating the create, update, or delete request to all AWS WAF servers. INSYNC: Propagation is complete.

Sourcemodule GetChangeTokenResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn't submit conflicting requests to AWS WAF. Each create, update, or delete request must use a unique change token. If your application submits a GetChangeToken request and then submits a second GetChangeToken request before submitting a create, update, or delete request, the second GetChangeToken request returns the same value as the first GetChangeToken request. When you use a change token in a create, update, or delete request, the status of the change token changes to PENDING, which indicates that AWS WAF is propagating the change to all AWS WAF servers. Use GetChangeTokenStatus to determine the status of your change token.

Sourcemodule GetChangeTokenRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. When you want to create, update, or delete AWS WAF objects, get a change token and include the change token in the create, update, or delete request. Change tokens ensure that your application doesn't submit conflicting requests to AWS WAF. Each create, update, or delete request must use a unique change token. If your application submits a GetChangeToken request and then submits a second GetChangeToken request before submitting a create, update, or delete request, the second GetChangeToken request returns the same value as the first GetChangeToken request. When you use a change token in a create, update, or delete request, the status of the change token changes to PENDING, which indicates that AWS WAF is propagating the change to all AWS WAF servers. Use GetChangeTokenStatus to determine the status of your change token.

Sourcemodule GetByteMatchSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the ByteMatchSet specified by ByteMatchSetId.

Sourcemodule GetByteMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Returns the ByteMatchSet specified by ByteMatchSetId.

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Removes a web ACL from the specified resource, either an application load balancer or Amazon API Gateway stage.

Sourcemodule DisassociateWebACLRequest : sig ... end

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Removes a web ACL from the specified resource, either an application load balancer or Amazon API Gateway stage.

Sourcemodule DeleteXssMatchSetResponse : sig ... end

The response to a request to delete an XssMatchSet from AWS WAF.

Sourcemodule DeleteXssMatchSetRequest : sig ... end

A request to delete an XssMatchSet from AWS WAF.

Sourcemodule DeleteWebACLResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a WebACL. You can't delete a WebACL if it still contains any Rules. To delete a WebACL, perform the following steps: Update the WebACL to remove Rules, if any. For more information, see UpdateWebACL. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteWebACL request. Submit a DeleteWebACL request.

Sourcemodule DeleteWebACLRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a WebACL. You can't delete a WebACL if it still contains any Rules. To delete a WebACL, perform the following steps: Update the WebACL to remove Rules, if any. For more information, see UpdateWebACL. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteWebACL request. Submit a DeleteWebACL request.

The response to a request to delete a SqlInjectionMatchSet from AWS WAF.

A request to delete a SqlInjectionMatchSet from AWS WAF.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a SizeConstraintSet. You can't delete a SizeConstraintSet if it's still used in any Rules or if it still includes any SizeConstraint objects (any filters). If you just want to remove a SizeConstraintSet from a Rule, use UpdateRule. To permanently delete a SizeConstraintSet, perform the following steps: Update the SizeConstraintSet to remove filters, if any. For more information, see UpdateSizeConstraintSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteSizeConstraintSet request. Submit a DeleteSizeConstraintSet request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a SizeConstraintSet. You can't delete a SizeConstraintSet if it's still used in any Rules or if it still includes any SizeConstraint objects (any filters). If you just want to remove a SizeConstraintSet from a Rule, use UpdateRule. To permanently delete a SizeConstraintSet, perform the following steps: Update the SizeConstraintSet to remove filters, if any. For more information, see UpdateSizeConstraintSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteSizeConstraintSet request. Submit a DeleteSizeConstraintSet request.

Sourcemodule DeleteRuleResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a Rule. You can't delete a Rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a Rule from a WebACL, use UpdateWebACL. To permanently delete a Rule from AWS WAF, perform the following steps: Update the Rule to remove predicates, if any. For more information, see UpdateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRule request. Submit a DeleteRule request.

Sourcemodule DeleteRuleRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a Rule. You can't delete a Rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a Rule from a WebACL, use UpdateWebACL. To permanently delete a Rule from AWS WAF, perform the following steps: Update the Rule to remove predicates, if any. For more information, see UpdateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRule request. Submit a DeleteRule request.

Sourcemodule DeleteRuleGroupResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RuleGroup. You can't delete a RuleGroup if it's still used in any WebACL objects or if it still includes any rules. If you just want to remove a RuleGroup from a WebACL, use UpdateWebACL. To permanently delete a RuleGroup from AWS WAF, perform the following steps: Update the RuleGroup to remove rules, if any. For more information, see UpdateRuleGroup. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRuleGroup request. Submit a DeleteRuleGroup request.

Sourcemodule DeleteRuleGroupRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RuleGroup. You can't delete a RuleGroup if it's still used in any WebACL objects or if it still includes any rules. If you just want to remove a RuleGroup from a WebACL, use UpdateWebACL. To permanently delete a RuleGroup from AWS WAF, perform the following steps: Update the RuleGroup to remove rules, if any. For more information, see UpdateRuleGroup. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRuleGroup request. Submit a DeleteRuleGroup request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RegexPatternSet. You can't delete a RegexPatternSet if it's still used in any RegexMatchSet or if the RegexPatternSet is not empty.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RegexPatternSet. You can't delete a RegexPatternSet if it's still used in any RegexMatchSet or if the RegexPatternSet is not empty.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RegexMatchSet. You can't delete a RegexMatchSet if it's still used in any Rules or if it still includes any RegexMatchTuples objects (any filters). If you just want to remove a RegexMatchSet from a Rule, use UpdateRule. To permanently delete a RegexMatchSet, perform the following steps: Update the RegexMatchSet to remove filters, if any. For more information, see UpdateRegexMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRegexMatchSet request. Submit a DeleteRegexMatchSet request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RegexMatchSet. You can't delete a RegexMatchSet if it's still used in any Rules or if it still includes any RegexMatchTuples objects (any filters). If you just want to remove a RegexMatchSet from a Rule, use UpdateRule. To permanently delete a RegexMatchSet, perform the following steps: Update the RegexMatchSet to remove filters, if any. For more information, see UpdateRegexMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRegexMatchSet request. Submit a DeleteRegexMatchSet request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RateBasedRule. You can't delete a rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a rule from a WebACL, use UpdateWebACL. To permanently delete a RateBasedRule from AWS WAF, perform the following steps: Update the RateBasedRule to remove predicates, if any. For more information, see UpdateRateBasedRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRateBasedRule request. Submit a DeleteRateBasedRule request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a RateBasedRule. You can't delete a rule if it's still used in any WebACL objects or if it still includes any predicates, such as ByteMatchSet objects. If you just want to remove a rule from a WebACL, use UpdateWebACL. To permanently delete a RateBasedRule from AWS WAF, perform the following steps: Update the RateBasedRule to remove predicates, if any. For more information, see UpdateRateBasedRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteRateBasedRule request. Submit a DeleteRateBasedRule request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes an IAM policy from the specified RuleGroup. The user making the request must be the owner of the RuleGroup.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes an IAM policy from the specified RuleGroup. The user making the request must be the owner of the RuleGroup.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes the LoggingConfiguration from the specified web ACL.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes the LoggingConfiguration from the specified web ACL.

Sourcemodule DeleteIPSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes an IPSet. You can't delete an IPSet if it's still used in any Rules or if it still includes any IP addresses. If you just want to remove an IPSet from a Rule, use UpdateRule. To permanently delete an IPSet from AWS WAF, perform the following steps: Update the IPSet to remove IP address ranges, if any. For more information, see UpdateIPSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteIPSet request. Submit a DeleteIPSet request.

Sourcemodule DeleteIPSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes an IPSet. You can't delete an IPSet if it's still used in any Rules or if it still includes any IP addresses. If you just want to remove an IPSet from a Rule, use UpdateRule. To permanently delete an IPSet from AWS WAF, perform the following steps: Update the IPSet to remove IP address ranges, if any. For more information, see UpdateIPSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteIPSet request. Submit a DeleteIPSet request.

Sourcemodule DeleteGeoMatchSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a GeoMatchSet. You can't delete a GeoMatchSet if it's still used in any Rules or if it still includes any countries. If you just want to remove a GeoMatchSet from a Rule, use UpdateRule. To permanently delete a GeoMatchSet from AWS WAF, perform the following steps: Update the GeoMatchSet to remove any countries. For more information, see UpdateGeoMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteGeoMatchSet request. Submit a DeleteGeoMatchSet request.

Sourcemodule DeleteGeoMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a GeoMatchSet. You can't delete a GeoMatchSet if it's still used in any Rules or if it still includes any countries. If you just want to remove a GeoMatchSet from a Rule, use UpdateRule. To permanently delete a GeoMatchSet from AWS WAF, perform the following steps: Update the GeoMatchSet to remove any countries. For more information, see UpdateGeoMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteGeoMatchSet request. Submit a DeleteGeoMatchSet request.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a ByteMatchSet. You can't delete a ByteMatchSet if it's still used in any Rules or if it still includes any ByteMatchTuple objects (any filters). If you just want to remove a ByteMatchSet from a Rule, use UpdateRule. To permanently delete a ByteMatchSet, perform the following steps: Update the ByteMatchSet to remove filters, if any. For more information, see UpdateByteMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteByteMatchSet request. Submit a DeleteByteMatchSet request.

Sourcemodule DeleteByteMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Permanently deletes a ByteMatchSet. You can't delete a ByteMatchSet if it's still used in any Rules or if it still includes any ByteMatchTuple objects (any filters). If you just want to remove a ByteMatchSet from a Rule, use UpdateRule. To permanently delete a ByteMatchSet, perform the following steps: Update the ByteMatchSet to remove filters, if any. For more information, see UpdateByteMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a DeleteByteMatchSet request. Submit a DeleteByteMatchSet request.

Sourcemodule CreateXssMatchSetResponse : sig ... end

The response to a CreateXssMatchSet request.

Sourcemodule CreateXssMatchSetRequest : sig ... end

A request to create an XssMatchSet.

Sourcemodule CreateWebACLResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a WebACL, which contains the Rules that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluates Rules in order based on the value of Priority for each Rule. You also specify a default action, either ALLOW or BLOCK. If a web request doesn't match any of the Rules in a WebACL, AWS WAF responds to the request with the default action. To create and configure a WebACL, perform the following steps: Create and update the ByteMatchSet objects and other predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateWebACL request. Submit a CreateWebACL request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request. Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution. For more information about how to use the AWS WAF API, see the AWS WAF Developer Guide.

Sourcemodule CreateWebACLRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a WebACL, which contains the Rules that identify the CloudFront web requests that you want to allow, block, or count. AWS WAF evaluates Rules in order based on the value of Priority for each Rule. You also specify a default action, either ALLOW or BLOCK. If a web request doesn't match any of the Rules in a WebACL, AWS WAF responds to the request with the default action. To create and configure a WebACL, perform the following steps: Create and update the ByteMatchSet objects and other predicates that you want to include in Rules. For more information, see CreateByteMatchSet, UpdateByteMatchSet, CreateIPSet, UpdateIPSet, CreateSqlInjectionMatchSet, and UpdateSqlInjectionMatchSet. Create and update the Rules that you want to include in the WebACL. For more information, see CreateRule and UpdateRule. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateWebACL request. Submit a CreateWebACL request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateWebACL request. Submit an UpdateWebACL request to specify the Rules that you want to include in the WebACL, to specify the default action, and to associate the WebACL with a CloudFront distribution. For more information about how to use the AWS WAF API, see the AWS WAF Developer Guide.

Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket. Then, in CloudFormation, you create a stack from the template, to create the web ACL and its resources in AWS WAFV2. Use this to migrate your AWS WAF Classic web ACL to the latest version of AWS WAF. This is part of a larger migration procedure for web ACLs from AWS WAF Classic to the latest version of AWS WAF. For the full procedure, including caveats and manual steps to complete the migration and switch over to the new web ACL, see Migrating your AWS WAF Classic resources to AWS WAF in the AWS WAF Developer Guide.

Creates an AWS CloudFormation WAFV2 template for the specified web ACL in the specified Amazon S3 bucket. Then, in CloudFormation, you create a stack from the template, to create the web ACL and its resources in AWS WAFV2. Use this to migrate your AWS WAF Classic web ACL to the latest version of AWS WAF. This is part of a larger migration procedure for web ACLs from AWS WAF Classic to the latest version of AWS WAF. For the full procedure, including caveats and manual steps to complete the migration and switch over to the new web ACL, see Migrating your AWS WAF Classic resources to AWS WAF in the AWS WAF Developer Guide.

The response to a CreateSqlInjectionMatchSet request.

A request to create a SqlInjectionMatchSet.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a SizeConstraintSet. You then use UpdateSizeConstraintSet to identify the part of a web request that you want AWS WAF to check for length, such as the length of the User-Agent header or the length of the query string. For example, you can create a SizeConstraintSet that matches any requests that have a query string that is longer than 100 bytes. You can then configure AWS WAF to reject those requests. To create and configure a SizeConstraintSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateSizeConstraintSet request. Submit a CreateSizeConstraintSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request. Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a SizeConstraintSet. You then use UpdateSizeConstraintSet to identify the part of a web request that you want AWS WAF to check for length, such as the length of the User-Agent header or the length of the query string. For example, you can create a SizeConstraintSet that matches any requests that have a query string that is longer than 100 bytes. You can then configure AWS WAF to reject those requests. To create and configure a SizeConstraintSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateSizeConstraintSet request. Submit a CreateSizeConstraintSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateSizeConstraintSet request. Submit an UpdateSizeConstraintSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateRuleResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a Rule, which contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to block. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed or blocked. For example, suppose that you add the following to a Rule: An IPSet that matches the IP address 192.0.2.44/32 A ByteMatchSet that matches BadBot in the User-Agent header You then add the Rule to a WebACL and specify that you want to blocks requests that satisfy the Rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. To create and configure a Rule, perform the following steps: Create and update the predicates that you want to include in the Rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request. Submit a CreateRule request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request. Submit an UpdateRule request to specify the predicates that you want to include in the Rule. Create and update a WebACL that contains the Rule. For more information, see CreateWebACL. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateRuleRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a Rule, which contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to block. If you add more than one predicate to a Rule, a request must match all of the specifications to be allowed or blocked. For example, suppose that you add the following to a Rule: An IPSet that matches the IP address 192.0.2.44/32 A ByteMatchSet that matches BadBot in the User-Agent header You then add the Rule to a WebACL and specify that you want to blocks requests that satisfy the Rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. To create and configure a Rule, perform the following steps: Create and update the predicates that you want to include in the Rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request. Submit a CreateRule request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request. Submit an UpdateRule request to specify the predicates that you want to include in the Rule. Create and update a WebACL that contains the Rule. For more information, see CreateWebACL. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateRuleGroupResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RuleGroup. A rule group is a collection of predefined rules that you add to a web ACL. You use UpdateRuleGroup to add rules to the rule group. Rule groups are subject to the following limits: Three rule groups per account. You can request an increase to this limit by contacting customer support. One rule group per web ACL. Ten rules per rule group. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateRuleGroupRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RuleGroup. A rule group is a collection of predefined rules that you add to a web ACL. You use UpdateRuleGroup to add rules to the rule group. Rule groups are subject to the following limits: Three rule groups per account. You can request an increase to this limit by contacting customer support. One rule group per web ACL. Ten rules per rule group. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RegexPatternSet. You then use UpdateRegexPatternSet to specify the regular expression (regex) pattern that you want AWS WAF to search for, such as B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexPatternSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexPatternSet request. Submit a CreateRegexPatternSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request. Submit an UpdateRegexPatternSet request to specify the string that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RegexPatternSet. You then use UpdateRegexPatternSet to specify the regular expression (regex) pattern that you want AWS WAF to search for, such as B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexPatternSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexPatternSet request. Submit a CreateRegexPatternSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexPatternSet request. Submit an UpdateRegexPatternSet request to specify the string that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RegexMatchSet. You then use UpdateRegexMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a RegexMatchSet that contains a RegexMatchTuple that looks for any requests with User-Agent headers that match a RegexPatternSet with pattern B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexMatchSet request. Submit a CreateRegexMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request. Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value, using a RegexPatternSet, that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RegexMatchSet. You then use UpdateRegexMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a RegexMatchSet that contains a RegexMatchTuple that looks for any requests with User-Agent headers that match a RegexPatternSet with pattern B[a@]dB[o0]t. You can then configure AWS WAF to reject those requests. To create and configure a RegexMatchSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRegexMatchSet request. Submit a CreateRegexMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRegexMatchSet request. Submit an UpdateRegexMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value, using a RegexPatternSet, that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RateBasedRule. The RateBasedRule contains a RateLimit, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. The RateBasedRule also contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to count or block if these requests exceed the RateLimit. If you add more than one predicate to a RateBasedRule, a request not only must exceed the RateLimit, but it also must match all the conditions to be counted or blocked. For example, suppose you add the following to a RateBasedRule: An IPSet that matches the IP address 192.0.2.44/32 A ByteMatchSet that matches BadBot in the User-Agent header Further, you specify a RateLimit of 1,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions must be received at a rate of more than 1,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 1,000 for a five-minute period, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule: A ByteMatchSet with FieldToMatch of URI A PositionalConstraint of STARTS_WITH A TargetString of login Further, you specify a RateLimit of 1,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site. To create and configure a RateBasedRule, perform the following steps: Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request. Submit a CreateRateBasedRule request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request. Submit an UpdateRateBasedRule request to specify the predicates that you want to include in the rule. Create and update a WebACL that contains the RateBasedRule. For more information, see CreateWebACL. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a RateBasedRule. The RateBasedRule contains a RateLimit, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. The RateBasedRule also contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to count or block if these requests exceed the RateLimit. If you add more than one predicate to a RateBasedRule, a request not only must exceed the RateLimit, but it also must match all the conditions to be counted or blocked. For example, suppose you add the following to a RateBasedRule: An IPSet that matches the IP address 192.0.2.44/32 A ByteMatchSet that matches BadBot in the User-Agent header Further, you specify a RateLimit of 1,000. You then add the RateBasedRule to a WebACL and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions must be received at a rate of more than 1,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 1,000 for a five-minute period, AWS WAF no longer blocks the requests. As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule: A ByteMatchSet with FieldToMatch of URI A PositionalConstraint of STARTS_WITH A TargetString of login Further, you specify a RateLimit of 1,000. By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site. To create and configure a RateBasedRule, perform the following steps: Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request. Submit a CreateRateBasedRule request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request. Submit an UpdateRateBasedRule request to specify the predicates that you want to include in the rule. Create and update a WebACL that contains the RateBasedRule. For more information, see CreateWebACL. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateIPSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates an IPSet, which you use to specify which web requests that you want to allow or block based on the IP addresses that the requests originate from. For example, if you're receiving a lot of requests from one or more individual IP addresses or one or more ranges of IP addresses and you want to block the requests, you can create an IPSet that contains those IP addresses and then configure AWS WAF to block the requests. To create and configure an IPSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateIPSet request. Submit a CreateIPSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request. Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateIPSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates an IPSet, which you use to specify which web requests that you want to allow or block based on the IP addresses that the requests originate from. For example, if you're receiving a lot of requests from one or more individual IP addresses or one or more ranges of IP addresses and you want to block the requests, you can create an IPSet that contains those IP addresses and then configure AWS WAF to block the requests. To create and configure an IPSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateIPSet request. Submit a CreateIPSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateIPSet request. Submit an UpdateIPSet request to specify the IP addresses that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateGeoMatchSetResponse : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates an GeoMatchSet, which you use to specify which web requests you want to allow or block based on the country that the requests originate from. For example, if you're receiving a lot of requests from one or more countries and you want to block the requests, you can create an GeoMatchSet that contains those countries and then configure AWS WAF to block the requests. To create and configure a GeoMatchSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateGeoMatchSet request. Submit a CreateGeoMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request. Submit an UpdateGeoMatchSetSet request to specify the countries that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateGeoMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates an GeoMatchSet, which you use to specify which web requests you want to allow or block based on the country that the requests originate from. For example, if you're receiving a lot of requests from one or more countries and you want to block the requests, you can create an GeoMatchSet that contains those countries and then configure AWS WAF to block the requests. To create and configure a GeoMatchSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateGeoMatchSet request. Submit a CreateGeoMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateGeoMatchSet request. Submit an UpdateGeoMatchSetSet request to specify the countries that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a ByteMatchSet. You then use UpdateByteMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a ByteMatchSet that matches any requests with User-Agent headers that contain the string BadBot. You can then configure AWS WAF to reject those requests. To create and configure a ByteMatchSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateByteMatchSet request. Submit a CreateByteMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request. Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule CreateByteMatchSetRequest : sig ... end

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Creates a ByteMatchSet. You then use UpdateByteMatchSet to identify the part of a web request that you want AWS WAF to inspect, such as the values of the User-Agent header or the query string. For example, you can create a ByteMatchSet that matches any requests with User-Agent headers that contain the string BadBot. You can then configure AWS WAF to reject those requests. To create and configure a ByteMatchSet, perform the following steps: Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateByteMatchSet request. Submit a CreateByteMatchSet request. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateByteMatchSet request. Submit an UpdateByteMatchSet request to specify the part of the request that you want AWS WAF to inspect (for example, the header or the URI) and the value that you want AWS WAF to watch for. For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Sourcemodule AssociateWebACLResponse : sig ... end

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Associates a web ACL with a resource, either an application load balancer or Amazon API Gateway stage.

Sourcemodule AssociateWebACLRequest : sig ... end

This is AWS WAF Classic Regional documentation. For more information, see AWS WAF Classic in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use. Associates a web ACL with a resource, either an application load balancer or Amazon API Gateway stage.