Awso_synthetics.ValuesSourceval structure_to_value_aux :
('a * 'b option) list ->
f:(('a * 'b) list -> 'c) ->
[> `Structure of 'c ]val structure_to_wrapped_value :
wrapper:'a ->
response:'a ->
('b * 'c option) list ->
[> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]A structure representing a screenshot that is used as a baseline during visual monitoring comparisons made by the canary.
A structure that contains information about a dependency for a canary.
A structure that contains the configuration of encryption-at-rest settings for canary artifacts that the canary uploads to Amazon S3. For more information, see Encrypting canary artifacts
A structure that specifies the browser type to use for a canary run.
This structure contains information about the canary's retry configuration.
A structure of engine configurations for the canary, one for each browser type that the canary is configured to run on.
If this canary performs visual monitoring by comparing screenshots, this structure contains the ID of the canary run that is used as the baseline for screenshots, and the coordinates of any parts of those screenshots that are ignored during visual monitoring comparison. Visual monitoring is supported only on canaries running the syn-puppeteer-node-3.2 runtime or later.
Returns the dry run configurations set for a canary.
This structure contains the status information about a canary run.
This structure contains the start and end times of a single canary run.
A structure that contains the configuration for canary artifacts, including the encryption-at-rest settings for artifacts that the canary uploads to Amazon S3.
This structure contains information about the canary's Lambda handler and where its code is stored by CloudWatch Synthetics.
A structure that contains information about a canary run.
How long, in seconds, for the canary to continue making regular runs according to the schedule in the Expression value.
A structure that contains the current state of the canary.
This structure contains information about when the canary was created and modified.
Returns the dry run configurations set for a canary.
If this canary is to test an endpoint in a VPC, this structure contains information about the subnets and security groups of the VPC endpoint. For more information, see Running a Canary in a VPC.
This structure contains the details about one run of one canary.
This structure contains information about the canary's retry configuration. The default account level concurrent execution limit from Lambda is 1000. When you have more than 1000 canaries, it's possible there are more than 1000 Lambda invocations due to retries and the console might hang. For more information on the Lambda execution limit, see Understanding Lambda function scaling. For canary with MaxRetries = 2, you need to set the CanaryRunConfigInput.TimeoutInSeconds to less than 600 seconds to avoid validation errors.
An object that specifies what screenshots to use as a baseline for visual monitoring by this canary. It can optionally also specify parts of the screenshots to ignore during the visual monitoring comparison. Visual monitoring is supported only on canaries running the syn-puppeteer-node-3.2 runtime or later. For more information, see Visual monitoring and Visual monitoring blueprint
A structure containing some information about a group.
This structure contains information about one canary runtime version. For more information about runtime versions, see Canary Runtime Versions.
This structure contains all information about one canary in your account.
This structure contains information about the most recent run of a single canary.
You don't have permission to perform this operation on this resource.
A conflicting operation is already in progress.
An unknown internal error occurred.
One of the input resources is larger than is allowed.
One of the specified resources was not found.
A parameter could not be validated.
A structure that contains the configuration for canary artifacts, including the encryption-at-rest settings for artifacts that the canary uploads to Amazon S3.
Use this structure to input your script code for the canary. This structure contains the Lambda handler with the location where the canary should start running the script. If the script is stored in an Amazon S3 bucket, the bucket name, key, and version are also included. If the script was passed into the canary directly, the script code is contained in the value of Zipfile. If you are uploading your canary scripts with an Amazon S3 bucket, your zip file should include your script in a certain folder structure. For Node.js canaries, the folder structure must be nodejs/node_modules/myCanaryFilename.js For more information, see Packaging your Node.js canary files For Python canaries, the folder structure must be python/myCanaryFilename.py or python/myFolder/myCanaryFilename.py For more information, see Packaging your Python canary files
A structure that contains input information for a canary run.
This structure specifies how often a canary is to make runs and the date and time when it should stop making runs.
If this canary is to test an endpoint in a VPC, this structure contains information about the subnets and security groups of the VPC endpoint. For more information, see Running a Canary in a VPC.
The request was not valid.
An internal failure occurred. Try the operation again.
The specified resource was not found.
There were too many simultaneous requests. Try the operation again.
The request exceeded a service quota value.
Updates the configuration of a canary that has already been created. For multibrowser canaries, you can add or remove browsers by updating the browserConfig list in the update call. For example: To add Firefox to a canary that currently uses Chrome, specify browserConfigs as [CHROME, FIREFOX] To remove Firefox and keep only Chrome, specify browserConfigs as [CHROME] You can't use this operation to update the tags of an existing canary. To change the tags of an existing canary, use TagResource. When you use the dryRunId field when updating a canary, the only other field you can provide is the Schedule. Adding any other field will thrown an exception.
Updates the configuration of a canary that has already been created. For multibrowser canaries, you can add or remove browsers by updating the browserConfig list in the update call. For example: To add Firefox to a canary that currently uses Chrome, specify browserConfigs as [CHROME, FIREFOX] To remove Firefox and keep only Chrome, specify browserConfigs as [CHROME] You can't use this operation to update the tags of an existing canary. To change the tags of an existing canary, use TagResource. When you use the dryRunId field when updating a canary, the only other field you can provide is the Schedule. Adding any other field will thrown an exception.
Removes one or more tags from the specified resource.
Removes one or more tags from the specified resource.
Assigns one or more tags (key-value pairs) to the specified canary or group. Tags can help you organize and categorize your resources. You can also use them to scope user permissions, by granting a user permission to access or change only resources with certain tag values. Tags don't have any semantic meaning to Amazon Web Services and are interpreted strictly as strings of characters. You can use the TagResource action with a resource that already has tags. If you specify a new tag key for the resource, this tag is appended to the list of tags associated with the resource. If you specify a tag key that is already associated with the resource, the new tag value that you specify replaces the previous value for that tag. You can associate as many as 50 tags with a canary or group.
Assigns one or more tags (key-value pairs) to the specified canary or group. Tags can help you organize and categorize your resources. You can also use them to scope user permissions, by granting a user permission to access or change only resources with certain tag values. Tags don't have any semantic meaning to Amazon Web Services and are interpreted strictly as strings of characters. You can use the TagResource action with a resource that already has tags. If you specify a new tag key for the resource, this tag is appended to the list of tags associated with the resource. If you specify a tag key that is already associated with the resource, the new tag value that you specify replaces the previous value for that tag. You can associate as many as 50 tags with a canary or group.
Stops the canary to prevent all future runs. If the canary is currently running,the run that is in progress completes on its own, publishes metrics, and uploads artifacts, but it is not recorded in Synthetics as a completed run. You can use StartCanary to start it running again with the canary’s current schedule at any point in the future.
Stops the canary to prevent all future runs. If the canary is currently running,the run that is in progress completes on its own, publishes metrics, and uploads artifacts, but it is not recorded in Synthetics as a completed run. You can use StartCanary to start it running again with the canary’s current schedule at any point in the future.
Use this operation to run a canary that has already been created. The frequency of the canary runs is determined by the value of the canary's Schedule. To see a canary's schedule, use GetCanary.
Use this operation to run a canary that has already been created. The frequency of the canary runs is determined by the value of the canary's Schedule. To see a canary's schedule, use GetCanary.
Use this operation to start a dry run for a canary that has already been created
Use this operation to start a dry run for a canary that has already been created
Displays the tags associated with a canary or group.
Displays the tags associated with a canary or group.
Returns a list of all groups in the account, displaying their names, unique IDs, and ARNs. The groups from all Regions are returned.
Returns a list of all groups in the account, displaying their names, unique IDs, and ARNs. The groups from all Regions are returned.
This operation returns a list of the ARNs of the canaries that are associated with the specified group.
This operation returns a list of the ARNs of the canaries that are associated with the specified group.
Returns a list of the groups that the specified canary is associated with. The canary that you specify must be in the current Region.
Returns a list of the groups that the specified canary is associated with. The canary that you specify must be in the current Region.
Returns information about one group. Groups are a global resource, so you can use this operation from any Region.
Returns information about one group. Groups are a global resource, so you can use this operation from any Region.
Retrieves a list of runs for a specified canary.
Retrieves a list of runs for a specified canary.
Retrieves complete information about one canary. You must specify the name of the canary that you want. To get a list of canaries and their names, use DescribeCanaries.
Retrieves complete information about one canary. You must specify the name of the canary that you want. To get a list of canaries and their names, use DescribeCanaries.
Removes a canary from a group. You must run this operation in the Region where the canary exists.
Removes a canary from a group. You must run this operation in the Region where the canary exists.
Returns a list of Synthetics canary runtime versions. For more information, see Canary Runtime Versions.
Returns a list of Synthetics canary runtime versions. For more information, see Canary Runtime Versions.
This operation returns a list of the canaries in your account, along with full details about each canary. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see Limiting a user to viewing specific canaries.
This operation returns a list of the canaries in your account, along with full details about each canary. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see Limiting a user to viewing specific canaries.
Use this operation to see information from the most recent run of each canary that you have created. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see Limiting a user to viewing specific canaries.
Use this operation to see information from the most recent run of each canary that you have created. This operation supports resource-level authorization using an IAM policy and the Names parameter. If you specify the Names parameter, the operation is successful only if you have authorization to view all the canaries that you specify in your request. If you do not have permission to view any of the canaries, the request fails with a 403 response. You are required to use the Names parameter if you are logged on to a user or role that has an IAM policy that restricts which canaries that you are allowed to view. For more information, see Limiting a user to viewing specific canaries.
Deletes a group. The group doesn't need to be empty to be deleted. If there are canaries in the group, they are not deleted when you delete the group. Groups are a global resource that appear in all Regions, but the request to delete a group must be made from its home Region. You can find the home Region of a group within its ARN.
Deletes a group. The group doesn't need to be empty to be deleted. If there are canaries in the group, they are not deleted when you delete the group. Groups are a global resource that appear in all Regions, but the request to delete a group must be made from its home Region. You can find the home Region of a group within its ARN.
Permanently deletes the specified canary. If the canary's ProvisionedResourceCleanup field is set to AUTOMATIC or you specify DeleteLambda in this operation as true, CloudWatch Synthetics also deletes the Lambda functions and layers that are used by the canary. Other resources used and created by the canary are not automatically deleted. After you delete a canary, you should also delete the following: The CloudWatch alarms created for this canary. These alarms have a name of Synthetics-Alarm-first-198-characters-of-canary-name-canaryId-alarm number Amazon S3 objects and buckets, such as the canary's artifact location. IAM roles created for the canary. If they were created in the console, these roles have the name role/service-role/CloudWatchSyntheticsRole-First-21-Characters-of-CanaryName CloudWatch Logs log groups created for the canary. These logs groups have the name /aws/lambda/cwsyn-First-21-Characters-of-CanaryName Before you delete a canary, you might want to use GetCanary to display the information about this canary. Make note of the information returned by this operation so that you can delete these resources after you delete the canary.
Permanently deletes the specified canary. If the canary's ProvisionedResourceCleanup field is set to AUTOMATIC or you specify DeleteLambda in this operation as true, CloudWatch Synthetics also deletes the Lambda functions and layers that are used by the canary. Other resources used and created by the canary are not automatically deleted. After you delete a canary, you should also delete the following: The CloudWatch alarms created for this canary. These alarms have a name of Synthetics-Alarm-first-198-characters-of-canary-name-canaryId-alarm number Amazon S3 objects and buckets, such as the canary's artifact location. IAM roles created for the canary. If they were created in the console, these roles have the name role/service-role/CloudWatchSyntheticsRole-First-21-Characters-of-CanaryName CloudWatch Logs log groups created for the canary. These logs groups have the name /aws/lambda/cwsyn-First-21-Characters-of-CanaryName Before you delete a canary, you might want to use GetCanary to display the information about this canary. Make note of the information returned by this operation so that you can delete these resources after you delete the canary.
Creates a group which you can use to associate canaries with each other, including cross-Region canaries. Using groups can help you with managing and automating your canaries, and you can also view aggregated run results and statistics for all canaries in a group. Groups are global resources. When you create a group, it is replicated across Amazon Web Services Regions, and you can view it and add canaries to it from any Region. Although the group ARN format reflects the Region name where it was created, a group is not constrained to any Region. This means that you can put canaries from multiple Regions into the same group, and then use that group to view and manage all of those canaries in a single view. Groups are supported in all Regions except the Regions that are disabled by default. For more information about these Regions, see Enabling a Region. Each group can contain as many as 10 canaries. You can have as many as 20 groups in your account. Any single canary can be a member of up to 10 groups.
Creates a group which you can use to associate canaries with each other, including cross-Region canaries. Using groups can help you with managing and automating your canaries, and you can also view aggregated run results and statistics for all canaries in a group. Groups are global resources. When you create a group, it is replicated across Amazon Web Services Regions, and you can view it and add canaries to it from any Region. Although the group ARN format reflects the Region name where it was created, a group is not constrained to any Region. This means that you can put canaries from multiple Regions into the same group, and then use that group to view and manage all of those canaries in a single view. Groups are supported in all Regions except the Regions that are disabled by default. For more information about these Regions, see Enabling a Region. Each group can contain as many as 10 canaries. You can have as many as 20 groups in your account. Any single canary can be a member of up to 10 groups.
Creates a canary. Canaries are scripts that monitor your endpoints and APIs from the outside-in. Canaries help you check the availability and latency of your web services and troubleshoot anomalies by investigating load time data, screenshots of the UI, logs, and metrics. You can set up a canary to run continuously or just once. Do not use CreateCanary to modify an existing canary. Use UpdateCanary instead. To create canaries, you must have the CloudWatchSyntheticsFullAccess policy. If you are creating a new IAM role for the canary, you also need the iam:CreateRole, iam:CreatePolicy and iam:AttachRolePolicy permissions. For more information, see Necessary Roles and Permissions. Do not include secrets or proprietary information in your canary names. The canary name makes up part of the Amazon Resource Name (ARN) for the canary, and the ARN is included in outbound calls over the internet. For more information, see Security Considerations for Synthetics Canaries.
Creates a canary. Canaries are scripts that monitor your endpoints and APIs from the outside-in. Canaries help you check the availability and latency of your web services and troubleshoot anomalies by investigating load time data, screenshots of the UI, logs, and metrics. You can set up a canary to run continuously or just once. Do not use CreateCanary to modify an existing canary. Use UpdateCanary instead. To create canaries, you must have the CloudWatchSyntheticsFullAccess policy. If you are creating a new IAM role for the canary, you also need the iam:CreateRole, iam:CreatePolicy and iam:AttachRolePolicy permissions. For more information, see Necessary Roles and Permissions. Do not include secrets or proprietary information in your canary names. The canary name makes up part of the Amazon Resource Name (ARN) for the canary, and the ARN is included in outbound calls over the internet. For more information, see Security Considerations for Synthetics Canaries.
Associates a canary with a group. Using groups can help you with managing and automating your canaries, and you can also view aggregated run results and statistics for all canaries in a group. You must run this operation in the Region where the canary exists.
Associates a canary with a group. Using groups can help you with managing and automating your canaries, and you can also view aggregated run results and statistics for all canaries in a group. You must run this operation in the Region where the canary exists.