Module Awso_route53_recovery_cluster.ValuesSource

Sourceval service : Awso.Service.t
Sourceval apiVersion : string
Sourceval endpointPrefix : string
Sourceval serviceFullName : string
Sourceval signatureVersion : string
Sourceval protocol : string
Sourceval globalEndpoint : string
Sourceval targetPrefix : string
Sourceval simple_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval composed_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval to_query : ('a -> Awso.Client.Query.value) -> 'a -> Awso.Client.Query.t
Sourceval structure_to_value_aux : ('a * 'b option) list -> f:(('a * 'b) list -> 'c) -> [> `Structure of 'c ]
Sourceval structure_to_value : ('a * 'b option) list -> [> `Structure of ('a * 'b) list ]
Sourceval structure_to_wrapped_value : wrapper:'a -> response:'a -> ('b * 'c option) list -> [> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]
Sourcemodule String_ : sig ... end
Sourcemodule ValidationExceptionField : sig ... end

There was a validation error on the request.

Sourcemodule Arn : sig ... end
Sourcemodule RoutingControlState : sig ... end
Sourcemodule ControlPanelName : sig ... end
Sourcemodule Owner : sig ... end
Sourcemodule RoutingControlName : sig ... end
Sourcemodule RetryAfterSeconds : sig ... end

Advice to clients on when the call can be safely retried

Sourcemodule ValidationExceptionReason : sig ... end

A routing control state entry.

Sourcemodule RoutingControl : sig ... end

A routing control, which is a simple on/off switch that you can use to route traffic to cells. When a routing control state is set to ON, traffic flows to a cell. When the state is set to OFF, traffic does not flow.

Sourcemodule AccessDeniedException : sig ... end

You don't have sufficient permissions to perform this action.

Sourcemodule ConflictException : sig ... end

There was a conflict with this request. Try again.

The cluster endpoint isn't available. Try another cluster endpoint.

Sourcemodule InternalServerException : sig ... end

There was an unexpected error during processing of the request.

Sourcemodule ResourceNotFoundException : sig ... end

The request references a routing control or control panel that was not found.

The request can't update that many routing control states at the same time. Try again with fewer routing control states.

Sourcemodule ThrottlingException : sig ... end

The request was denied because of request throttling.

Sourcemodule ValidationException : sig ... end

There was a validation error on the request.

Sourcemodule Arns : sig ... end
Sourcemodule PageToken : sig ... end
Sourcemodule RoutingControls : sig ... end
Sourcemodule MaxResults : sig ... end

Set multiple routing control states. You can set the value for each state to be ON or OFF. When the state is ON, traffic flows to a cell. When it's OFF, traffic does not flow. With Route 53 ARC, you can add safety rules for routing controls, which are safeguards for routing control state updates that help prevent unexpected outcomes, like fail open traffic routing. However, there are scenarios when you might want to bypass the routing control safeguards that are enforced with safety rules that you've configured. For example, you might want to fail over quickly for disaster recovery, and one or more safety rules might be unexpectedly preventing you from updating a routing control state to reroute traffic. In a "break glass" scenario like this, you can override one or more safety rules to change a routing control state and fail over your application. The SafetyRulesToOverride property enables you override one or more safety rules and update routing control states. For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide. You must specify Regional endpoints when you work with API cluster operations to get or update routing control states in Route 53 ARC. To see a code example for getting a routing control state, including accessing Regional cluster endpoints in sequence, see API examples in the Amazon Route 53 Application Recovery Controller Developer Guide. Viewing and updating routing control states Working with routing controls overall

Set multiple routing control states. You can set the value for each state to be ON or OFF. When the state is ON, traffic flows to a cell. When it's OFF, traffic does not flow. With Route 53 ARC, you can add safety rules for routing controls, which are safeguards for routing control state updates that help prevent unexpected outcomes, like fail open traffic routing. However, there are scenarios when you might want to bypass the routing control safeguards that are enforced with safety rules that you've configured. For example, you might want to fail over quickly for disaster recovery, and one or more safety rules might be unexpectedly preventing you from updating a routing control state to reroute traffic. In a "break glass" scenario like this, you can override one or more safety rules to change a routing control state and fail over your application. The SafetyRulesToOverride property enables you override one or more safety rules and update routing control states. For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide. You must specify Regional endpoints when you work with API cluster operations to get or update routing control states in Route 53 ARC. To see a code example for getting a routing control state, including accessing Regional cluster endpoints in sequence, see API examples in the Amazon Route 53 Application Recovery Controller Developer Guide. Viewing and updating routing control states Working with routing controls overall

Set the state of the routing control to reroute traffic. You can set the value to ON or OFF. When the state is ON, traffic flows to a cell. When the state is OFF, traffic does not flow. With Route 53 ARC, you can add safety rules for routing controls, which are safeguards for routing control state updates that help prevent unexpected outcomes, like fail open traffic routing. However, there are scenarios when you might want to bypass the routing control safeguards that are enforced with safety rules that you've configured. For example, you might want to fail over quickly for disaster recovery, and one or more safety rules might be unexpectedly preventing you from updating a routing control state to reroute traffic. In a "break glass" scenario like this, you can override one or more safety rules to change a routing control state and fail over your application. The SafetyRulesToOverride property enables you override one or more safety rules and update routing control states. For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide. You must specify Regional endpoints when you work with API cluster operations to get or update routing control states in Route 53 ARC. To see a code example for getting a routing control state, including accessing Regional cluster endpoints in sequence, see API examples in the Amazon Route 53 Application Recovery Controller Developer Guide. Viewing and updating routing control states Working with routing controls overall

Set the state of the routing control to reroute traffic. You can set the value to ON or OFF. When the state is ON, traffic flows to a cell. When the state is OFF, traffic does not flow. With Route 53 ARC, you can add safety rules for routing controls, which are safeguards for routing control state updates that help prevent unexpected outcomes, like fail open traffic routing. However, there are scenarios when you might want to bypass the routing control safeguards that are enforced with safety rules that you've configured. For example, you might want to fail over quickly for disaster recovery, and one or more safety rules might be unexpectedly preventing you from updating a routing control state to reroute traffic. In a "break glass" scenario like this, you can override one or more safety rules to change a routing control state and fail over your application. The SafetyRulesToOverride property enables you override one or more safety rules and update routing control states. For more information, see Override safety rules to reroute traffic in the Amazon Route 53 Application Recovery Controller Developer Guide. You must specify Regional endpoints when you work with API cluster operations to get or update routing control states in Route 53 ARC. To see a code example for getting a routing control state, including accessing Regional cluster endpoints in sequence, see API examples in the Amazon Route 53 Application Recovery Controller Developer Guide. Viewing and updating routing control states Working with routing controls overall

List routing control names and Amazon Resource Names (ARNs), as well as the routing control state for each routing control, along with the control panel name and control panel ARN for the routing controls. If you specify a control panel ARN, this call lists the routing controls in the control panel. Otherwise, it lists all the routing controls in the cluster. A routing control is a simple on/off switch in Route 53 ARC that you can use to route traffic to cells. When a routing control state is set to ON, traffic flows to a cell. When the state is set to OFF, traffic does not flow. Before you can create a routing control, you must first create a cluster, and then host the control in a control panel on the cluster. For more information, see Create routing control structures in the Amazon Route 53 Application Recovery Controller Developer Guide. You access one of the endpoints for the cluster to get or update the routing control state to redirect traffic for your application. You must specify Regional endpoints when you work with API cluster operations to use this API operation to list routing controls in Route 53 ARC. Learn more about working with routing controls in the following topics in the Amazon Route 53 Application Recovery Controller Developer Guide: Viewing and updating routing control states Working with routing controls in Route 53 ARC

List routing control names and Amazon Resource Names (ARNs), as well as the routing control state for each routing control, along with the control panel name and control panel ARN for the routing controls. If you specify a control panel ARN, this call lists the routing controls in the control panel. Otherwise, it lists all the routing controls in the cluster. A routing control is a simple on/off switch in Route 53 ARC that you can use to route traffic to cells. When a routing control state is set to ON, traffic flows to a cell. When the state is set to OFF, traffic does not flow. Before you can create a routing control, you must first create a cluster, and then host the control in a control panel on the cluster. For more information, see Create routing control structures in the Amazon Route 53 Application Recovery Controller Developer Guide. You access one of the endpoints for the cluster to get or update the routing control state to redirect traffic for your application. You must specify Regional endpoints when you work with API cluster operations to use this API operation to list routing controls in Route 53 ARC. Learn more about working with routing controls in the following topics in the Amazon Route 53 Application Recovery Controller Developer Guide: Viewing and updating routing control states Working with routing controls in Route 53 ARC

Get the state for a routing control. A routing control is a simple on/off switch that you can use to route traffic to cells. When a routing control state is set to ON, traffic flows to a cell. When the state is set to OFF, traffic does not flow. Before you can create a routing control, you must first create a cluster, and then host the control in a control panel on the cluster. For more information, see Create routing control structures in the Amazon Route 53 Application Recovery Controller Developer Guide. You access one of the endpoints for the cluster to get or update the routing control state to redirect traffic for your application. You must specify Regional endpoints when you work with API cluster operations to get or update routing control states in Route 53 ARC. To see a code example for getting a routing control state, including accessing Regional cluster endpoints in sequence, see API examples in the Amazon Route 53 Application Recovery Controller Developer Guide. Learn more about working with routing controls in the following topics in the Amazon Route 53 Application Recovery Controller Developer Guide: Viewing and updating routing control states Working with routing controls in Route 53 ARC

Get the state for a routing control. A routing control is a simple on/off switch that you can use to route traffic to cells. When a routing control state is set to ON, traffic flows to a cell. When the state is set to OFF, traffic does not flow. Before you can create a routing control, you must first create a cluster, and then host the control in a control panel on the cluster. For more information, see Create routing control structures in the Amazon Route 53 Application Recovery Controller Developer Guide. You access one of the endpoints for the cluster to get or update the routing control state to redirect traffic for your application. You must specify Regional endpoints when you work with API cluster operations to get or update routing control states in Route 53 ARC. To see a code example for getting a routing control state, including accessing Regional cluster endpoints in sequence, see API examples in the Amazon Route 53 Application Recovery Controller Developer Guide. Learn more about working with routing controls in the following topics in the Amazon Route 53 Application Recovery Controller Developer Guide: Viewing and updating routing control states Working with routing controls in Route 53 ARC