Module Values.AudioNormalizationSettingsSource

Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.

Sourcetype nonrec t = {
  1. algorithm : AudioNormalizationAlgorithm.t option;
    (*

    Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.

    *)
  2. algorithmControl : AudioNormalizationAlgorithmControl.t option;
    (*

    When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.

    *)
  3. correctionGateLevel : int option;
    (*

    Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.

    *)
  4. loudnessLogging : AudioNormalizationLoudnessLogging.t option;
    (*

    If set to LOG, log each output's audio track loudness to a CSV file.

    *)
  5. peakCalculation : AudioNormalizationPeakCalculation.t option;
    (*

    If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.

    *)
  6. targetLkfs : float option;
    (*

    When you use Audio normalization, optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm. If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.

    *)
  7. truePeakLimiterThreshold : float option;
    (*

    Specify the True-peak limiter threshold in decibels relative to full scale (dBFS). The peak inter-audio sample loudness in your output will be limited to the value that you specify, without affecting the overall target LKFS. Enter a value from 0 to -8. Leave blank to use the default value 0.

    *)
}
Sourceval make : ?algorithm:??? -> ?algorithmControl:??? -> ?correctionGateLevel:??? -> ?loudnessLogging:??? -> ?peakCalculation:??? -> ?targetLkfs:??? -> ?truePeakLimiterThreshold:??? -> unit -> t
Sourceval to_value : t -> [> `Structure of (string * [> `Double of float | `Enum of string | `Integer of int ]) list ]
Sourceval to_query : t -> Awso.Client.Query.t
Sourceval of_xml : Awso.Xml.t -> t
Sourceval of_string : string -> t
Sourceval of_json : Yojson.Safe.t -> t
Sourceval to_json : t -> Yojson.Safe.t