Values.CalculateRouteRequestSourceThis operation is no longer current and may be deprecated in the future. We recommend you upgrade to CalculateRoutes or CalculateIsolines unless you require Grab data. CalculateRoute is part of a previous Amazon Location Service Routes API (version 1) which has been superseded by a more intuitive, powerful, and complete API (version 2). The version 2 CalculateRoutes operation gives better results for point-to-point routing, while the version 2 CalculateIsolines operation adds support for calculating service areas and travel time envelopes. If you are using an Amazon Web Services SDK or the Amazon Web Services CLI, note that the Routes API version 2 is found under geo-routes or geo_routes, not under location. Since Grab is not yet fully supported in Routes API version 2, we recommend you continue using API version 1 when using Grab. Calculates a route given the following required parameters: DeparturePosition and DestinationPosition. Requires that you first create a route calculator resource. By default, a request that doesn't specify a departure time uses the best time of day to travel with the best traffic conditions when calculating the route. Additional options include: Specifying a departure time using either DepartureTime or DepartNow. This calculates a route based on predictive traffic data at the given time. You can't specify both DepartureTime and DepartNow in a single request. Specifying both parameters returns a validation error. Specifying a travel mode using TravelMode sets the transportation mode used to calculate the routes. This also lets you specify additional route preferences in CarModeOptions if traveling by Car, or TruckModeOptions if traveling by Truck. If you specify walking for the travel mode and your data provider is Esri, the start and destination must be within 40km.
type nonrec t = {calculatorName : ResourceName.t;The name of the route calculator resource that you want to use to calculate the route.
*)departurePosition : Position.t;The start position for the route. Defined in World Geodetic System (WGS 84) format: [longitude, latitude]. For example, [-123.115, 49.285] If you specify a departure that's not located on a road, Amazon Location moves the position to the nearest road. If Esri is the provider for your route calculator, specifying a route that is longer than 400 km returns a 400 RoutesValidationException error. Valid Values: [-180 to 180,-90 to 90]
*)destinationPosition : Position.t;The finish position for the route. Defined in World Geodetic System (WGS 84) format: [longitude, latitude]. For example, [-122.339, 47.615] If you specify a destination that's not located on a road, Amazon Location moves the position to the nearest road. Valid Values: [-180 to 180,-90 to 90]
*)waypointPositions : CalculateRouteRequestWaypointPositionsList.t option;Specifies an ordered list of up to 23 intermediate positions to include along a route between the departure position and destination position. For example, from the DeparturePosition [-123.115, 49.285], the route follows the order that the waypoint positions are given [[-122.757, 49.0021],[-122.349, 47.620]] If you specify a waypoint position that's not located on a road, Amazon Location moves the position to the nearest road. Specifying more than 23 waypoints returns a 400 ValidationException error. If Esri is the provider for your route calculator, specifying a route that is longer than 400 km returns a 400 RoutesValidationException error. Valid Values: [-180 to 180,-90 to 90]
*)travelMode : TravelMode.t option;Specifies the mode of transport when calculating a route. Used in estimating the speed of travel and road compatibility. You can choose Car, Truck, Walking, Bicycle or Motorcycle as options for the TravelMode. Bicycle and Motorcycle are only valid when using Grab as a data provider, and only within Southeast Asia. Truck is not available for Grab. For more details on the using Grab for routing, including areas of coverage, see GrabMaps in the Amazon Location Service Developer Guide. The TravelMode you specify also determines how you specify route preferences: If traveling by Car use the CarModeOptions parameter. If traveling by Truck use the TruckModeOptions parameter. Default Value: Car
*)departureTime : Timestamp.t option;Specifies the desired time of departure. Uses the given time to calculate the route. Otherwise, the best time of day to travel with the best traffic conditions is used to calculate the route. In ISO 8601 format: YYYY-MM-DDThh:mm:ss.sssZ. For example, 2020–07-2T12:15:20.000Z+01:00
*)departNow : SensitiveBoolean.t option;Sets the time of departure as the current time. Uses the current time to calculate a route. Otherwise, the best time of day to travel with the best traffic conditions is used to calculate the route. Default Value: false Valid Values: false | true
*)distanceUnit : DistanceUnit.t option;Set the unit system to specify the distance. Default Value: Kilometers
*)includeLegGeometry : SensitiveBoolean.t option;Set to include the geometry details in the result for each path between a pair of positions. Default Value: false Valid Values: false | true
*)carModeOptions : CalculateRouteCarModeOptions.t option;Specifies route preferences when traveling by Car, such as avoiding routes that use ferries or tolls. Requirements: TravelMode must be specified as Car.
*)truckModeOptions : CalculateRouteTruckModeOptions.t option;Specifies route preferences when traveling by Truck, such as avoiding routes that use ferries or tolls, and truck specifications to consider when choosing an optimal road. Requirements: TravelMode must be specified as Truck.
*)arrivalTime : Timestamp.t option;Specifies the desired time of arrival. Uses the given time to calculate the route. Otherwise, the best time of day to travel with the best traffic conditions is used to calculate the route. ArrivalTime is not supported Esri.
*)optimizeFor : OptimizationMode.t option;Specifies the distance to optimize for when calculating a route.
*)key : ApiKey.t option;The optional API key to authorize the request.
*)}val make :
?waypointPositions:??? ->
?travelMode:??? ->
?departureTime:??? ->
?departNow:??? ->
?distanceUnit:??? ->
?includeLegGeometry:??? ->
?carModeOptions:??? ->
?truckModeOptions:??? ->
?arrivalTime:??? ->
?optimizeFor:??? ->
?key:??? ->
calculatorName:ResourceName.t ->
departurePosition:Position.t ->
destinationPosition:Position.t ->
unit ->
tval to_value :
t ->
[> `Structure of
(string
* [> `Boolean of SensitiveBoolean.t
| `Enum of string
| `List of
[> `Double of Double.t | `List of [> `Double of Double.t ] list ]
list
| `String of ResourceName.t
| `Structure of
(string
* [> `Boolean of SensitiveBoolean.t
| `Structure of
(string
* [> `Double of TruckDimensionsLengthDouble.t
| `Enum of string ])
list ])
list
| `Timestamp of Timestamp.t ])
list ]