Module Awso_iotevents_data.ValuesSource

Sourceval service : Awso.Service.t
Sourceval apiVersion : string
Sourceval endpointPrefix : string
Sourceval serviceFullName : string
Sourceval signatureVersion : string
Sourceval protocol : string
Sourceval globalEndpoint : string
Sourceval simple_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval composed_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval to_query : ('a -> Awso.Client.Query.value) -> 'a -> Awso.Client.Query.t
Sourceval structure_to_value_aux : ('a * 'b option) list -> f:(('a * 'b) list -> 'c) -> [> `Structure of 'c ]
Sourceval structure_to_value : ('a * 'b option) list -> [> `Structure of ('a * 'b) list ]
Sourceval structure_to_wrapped_value : wrapper:'a -> response:'a -> ('b * 'c option) list -> [> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]
Sourcemodule Seconds : sig ... end
Sourcemodule TimerName : sig ... end
Sourcemodule VariableName : sig ... end
Sourcemodule VariableValue : sig ... end
Sourcemodule Timestamp : sig ... end
Sourcemodule Note : sig ... end
Sourcemodule SnoozeDuration : sig ... end
Sourcemodule ComparisonOperator : sig ... end
Sourcemodule InputPropertyValue : sig ... end
Sourcemodule ThresholdValue : sig ... end
Sourcemodule TriggerType : sig ... end
Sourcemodule TimerDefinition : sig ... end

The new setting of a timer.

Sourcemodule VariableDefinition : sig ... end

The new value of the variable.

Sourcemodule StateName : sig ... end
Sourcemodule Timer : sig ... end

The current state of a timer.

Sourcemodule Variable : sig ... end

The current state of the variable.

Contains the configuration information of an acknowledge action.

Sourcemodule CustomerActionName : sig ... end

Contains the configuration information of a disable action.

Sourcemodule EnableActionConfiguration : sig ... end

Contains the configuration information of an enable action.

Sourcemodule ResetActionConfiguration : sig ... end

Contains the configuration information of a reset action.

Sourcemodule SnoozeActionConfiguration : sig ... end

Contains the configuration information of a snooze action.

Sourcemodule SimpleRuleEvaluation : sig ... end

Information needed to compare two values with a comparison operator.

Sourcemodule EventType : sig ... end
Sourcemodule StateChangeConfiguration : sig ... end

Contains the configuration information of alarm state changes.

Sourcemodule TimerDefinitions : sig ... end
Sourcemodule VariableDefinitions : sig ... end
Sourcemodule EpochMilliTimestamp : sig ... end
Sourcemodule DetectorModelName : sig ... end
Sourcemodule DetectorModelVersion : sig ... end
Sourcemodule DetectorStateSummary : sig ... end

Information about the detector state.

Sourcemodule KeyValue : sig ... end
Sourcemodule AlarmModelName : sig ... end
Sourcemodule AlarmModelVersion : sig ... end
Sourcemodule AlarmStateName : sig ... end
Sourcemodule Timers : sig ... end
Sourcemodule Variables : sig ... end
Sourcemodule CustomerAction : sig ... end

Contains information about the action that you can take to respond to the alarm.

Sourcemodule RuleEvaluation : sig ... end

Information needed to evaluate data.

Sourcemodule SystemEvent : sig ... end

Contains information about alarm state changes.

Sourcemodule ErrorCode : sig ... end
Sourcemodule ErrorMessage : sig ... end
Sourcemodule MessageId : sig ... end
Sourcemodule DetectorStateDefinition : sig ... end

The new state, variable values, and timer settings of the detector (instance).

Sourcemodule RequestId : sig ... end
Sourcemodule EphemeralInputName : sig ... end
Sourcemodule Payload : sig ... end
Sourcemodule TimestampValue : sig ... end

Contains information about a timestamp.

Sourcemodule DetectorSummary : sig ... end

Information about the detector (instance).

Sourcemodule AlarmSummary : sig ... end

Contains a summary of an alarm.

Sourcemodule DetectorState : sig ... end

Information about the current state of the detector instance.

Sourcemodule AlarmState : sig ... end

Contains information about the current state of the alarm.

Sourcemodule Severity : sig ... end

Information about the error that occurred when attempting to update a detector.

Sourcemodule UpdateDetectorRequest : sig ... end

Information used to update the detector (instance).

Contains error messages associated with one of the following requests: BatchAcknowledgeAlarm BatchDisableAlarm BatchEnableAlarm BatchResetAlarm BatchSnoozeAlarm

Sourcemodule SnoozeAlarmActionRequest : sig ... end

Information needed to snooze the alarm.

Sourcemodule ResetAlarmActionRequest : sig ... end

Information needed to reset the alarm.

Sourcemodule BatchPutMessageErrorEntry : sig ... end

Contains information about the errors encountered.

Sourcemodule Message : sig ... end

Information about a message.

Sourcemodule EnableAlarmActionRequest : sig ... end

Information needed to enable the alarm.

Sourcemodule DisableAlarmActionRequest : sig ... end

Information used to disable the alarm.

Contains error messages associated with the deletion request.

Sourcemodule DeleteDetectorRequest : sig ... end

Information used to delete the detector model.

Information needed to acknowledge the alarm.

Sourcemodule DetectorSummaries : sig ... end
Sourcemodule InternalFailureException : sig ... end

An internal failure occurred.

Sourcemodule InvalidRequestException : sig ... end

The request was invalid.

Sourcemodule NextToken : sig ... end
Sourcemodule ResourceNotFoundException : sig ... end

The resource was not found.

The service is currently unavailable.

Sourcemodule ThrottlingException : sig ... end

The request could not be completed due to throttling.

Sourcemodule MaxResults : sig ... end
Sourcemodule AlarmSummaries : sig ... end
Sourcemodule Detector : sig ... end

Information about the detector (instance).

Sourcemodule Alarm : sig ... end

Contains information about an alarm.

Sourcemodule UpdateDetectorRequests : sig ... end
Sourcemodule SnoozeAlarmActionRequests : sig ... end
Sourcemodule ResetAlarmActionRequests : sig ... end
Sourcemodule Messages : sig ... end
Sourcemodule EnableAlarmActionRequests : sig ... end
Sourcemodule DeleteDetectorRequests : sig ... end
Sourcemodule ListDetectorsResponse : sig ... end

Lists detectors (the instances of a detector model).

Sourcemodule ListDetectorsRequest : sig ... end

Lists detectors (the instances of a detector model).

Sourcemodule ListAlarmsResponse : sig ... end

Lists one or more alarms. The operation returns only the metadata associated with each alarm.

Sourcemodule ListAlarmsRequest : sig ... end

Lists one or more alarms. The operation returns only the metadata associated with each alarm.

Sourcemodule DescribeDetectorResponse : sig ... end

Returns information about the specified detector (instance).

Sourcemodule DescribeDetectorRequest : sig ... end

Returns information about the specified detector (instance).

Sourcemodule DescribeAlarmResponse : sig ... end

Retrieves information about an alarm.

Sourcemodule DescribeAlarmRequest : sig ... end

Retrieves information about an alarm.

Updates the state, variable values, and timer settings of one or more detectors (instances) of a specified detector model.

Updates the state, variable values, and timer settings of one or more detectors (instances) of a specified detector model.

Sourcemodule BatchSnoozeAlarmResponse : sig ... end

Changes one or more alarms to the snooze mode. The alarms change to the SNOOZE_DISABLED state after you set them to the snooze mode.

Sourcemodule BatchSnoozeAlarmRequest : sig ... end

Changes one or more alarms to the snooze mode. The alarms change to the SNOOZE_DISABLED state after you set them to the snooze mode.

Sourcemodule BatchResetAlarmResponse : sig ... end

Resets one or more alarms. The alarms return to the NORMAL state after you reset them.

Sourcemodule BatchResetAlarmRequest : sig ... end

Resets one or more alarms. The alarms return to the NORMAL state after you reset them.

Sourcemodule BatchPutMessageResponse : sig ... end

Sends a set of messages to the IoT Events system. Each message payload is transformed into the input you specify ("inputName") and ingested into any detectors that monitor that input. If multiple messages are sent, the order in which the messages are processed isn't guaranteed. To guarantee ordering, you must send messages one at a time and wait for a successful response.

Sourcemodule BatchPutMessageRequest : sig ... end

Sends a set of messages to the IoT Events system. Each message payload is transformed into the input you specify ("inputName") and ingested into any detectors that monitor that input. If multiple messages are sent, the order in which the messages are processed isn't guaranteed. To guarantee ordering, you must send messages one at a time and wait for a successful response.

Sourcemodule BatchEnableAlarmResponse : sig ... end

Enables one or more alarms. The alarms change to the NORMAL state after you enable them.

Sourcemodule BatchEnableAlarmRequest : sig ... end

Enables one or more alarms. The alarms change to the NORMAL state after you enable them.

Sourcemodule BatchDisableAlarmResponse : sig ... end

Disables one or more alarms. The alarms change to the DISABLED state after you disable them.

Sourcemodule BatchDisableAlarmRequest : sig ... end

Disables one or more alarms. The alarms change to the DISABLED state after you disable them.

Deletes one or more detectors that were created. When a detector is deleted, its state will be cleared and the detector will be removed from the list of detectors. The deleted detector will no longer appear if referenced in the ListDetectors API call.

Deletes one or more detectors that were created. When a detector is deleted, its state will be cleared and the detector will be removed from the list of detectors. The deleted detector will no longer appear if referenced in the ListDetectors API call.

Acknowledges one or more alarms. The alarms change to the ACKNOWLEDGED state after you acknowledge them.

Acknowledges one or more alarms. The alarms change to the ACKNOWLEDGED state after you acknowledge them.