Module Awso_translate.ValuesSource

Sourceval service : Awso.Service.t
Sourceval apiVersion : string
Sourceval endpointPrefix : string
Sourceval serviceFullName : string
Sourceval signatureVersion : string
Sourceval protocol : string
Sourceval globalEndpoint : string
Sourceval targetPrefix : string
Sourceval simple_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval composed_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t
Sourceval to_query : ('a -> Awso.Client.Query.value) -> 'a -> Awso.Client.Query.t
Sourceval structure_to_value_aux : ('a * 'b option) list -> f:(('a * 'b) list -> 'c) -> [> `Structure of 'c ]
Sourceval structure_to_value : ('a * 'b option) list -> [> `Structure of ('a * 'b) list ]
Sourceval structure_to_wrapped_value : wrapper:'a -> response:'a -> ('b * 'c option) list -> [> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]
Sourcemodule String_ : sig ... end
Sourcemodule EncryptionKeyID : sig ... end
Sourcemodule EncryptionKeyType : sig ... end
Sourcemodule Term : sig ... end

The term being translated by the custom terminology.

Sourcemodule ContentType : sig ... end
Sourcemodule S3Uri : sig ... end
Sourcemodule Integer : sig ... end
Sourcemodule EncryptionKey : sig ... end

The encryption key used to encrypt this object.

Sourcemodule ResourceName : sig ... end
Sourcemodule LanguageCodeString : sig ... end
Sourcemodule Brevity : sig ... end
Sourcemodule Formality : sig ... end
Sourcemodule Profanity : sig ... end
Sourcemodule ParallelDataFormat : sig ... end
Sourcemodule TermList : sig ... end
Sourcemodule TagKey : sig ... end
Sourcemodule TagValue : sig ... end
Sourcemodule IamRoleArn : sig ... end
Sourcemodule InputDataConfig : sig ... end

The input configuration properties for requesting a batch translation job.

Sourcemodule JobDetails : sig ... end

The number of documents successfully and unsuccessfully processed during a translation job.

Sourcemodule JobId : sig ... end
Sourcemodule JobName : sig ... end
Sourcemodule JobStatus : sig ... end
Sourcemodule OutputDataConfig : sig ... end

The output configuration properties for a batch translation job.

Sourcemodule ResourceNameList : sig ... end
Sourcemodule Timestamp : sig ... end
Sourcemodule TranslationSettings : sig ... end

Settings to configure your translation output. You can configure the following options: Brevity: reduces the length of the translation output for most translations. Available for TranslateText only. Formality: sets the formality level of the translation output. Profanity: masks profane words and phrases in the translation output.

Sourcemodule UnboundedLengthString : sig ... end
Sourcemodule Description : sig ... end
Sourcemodule Directionality : sig ... end
Sourcemodule LanguageCodeStringList : sig ... end
Sourcemodule TerminologyArn : sig ... end
Sourcemodule TerminologyDataFormat : sig ... end
Sourcemodule Long : sig ... end
Sourcemodule ParallelDataArn : sig ... end
Sourcemodule ParallelDataConfig : sig ... end

Specifies the format and S3 location of the parallel data input file.

Sourcemodule ParallelDataStatus : sig ... end
Sourcemodule LocalizedNameString : sig ... end
Sourcemodule AppliedTerminology : sig ... end

The custom terminology applied to the input text by Amazon Translate for the translated text response. This is optional in the response and will only be present if you specified terminology input in the request. Currently, only one terminology can be applied per TranslateText request.

Sourcemodule TranslatedDocumentContent : sig ... end
Sourcemodule DocumentContent : sig ... end
Sourcemodule ResourceArn : sig ... end
Sourcemodule Tag : sig ... end

A key-value pair that adds as a metadata to a resource used by Amazon Translate.

Provides information about a translation job.

Sourcemodule TerminologyProperties : sig ... end

The properties of the custom terminology.

Sourcemodule ParallelDataProperties : sig ... end

The properties of a parallel data resource.

Sourcemodule Language : sig ... end

A supported language.

Sourcemodule TerminologyFile : sig ... end

Another modification is being made. That modification must complete before you can make your change.

Sourcemodule ConflictException : sig ... end

There was a conflict processing the request. Try your request again.

Sourcemodule InternalServerException : sig ... end

An internal server error occurred. Retry your request.

The value of the parameter is not valid. Review the value of the parameter you are using to correct it, and then retry your operation.

Sourcemodule InvalidRequestException : sig ... end

The request that you made is not valid. Check your request to determine why it's not valid and then retry the request.

Sourcemodule LimitExceededException : sig ... end

The specified limit has been exceeded. Review your request and retry it with a quantity below the stated limit.

Sourcemodule ResourceNotFoundException : sig ... end

The resource you are looking for has not been found. Review the resource you're looking for and see if a different resource will accomplish your needs before retrying the revised request.

Sourcemodule TooManyRequestsException : sig ... end

You have made too many requests within a short period of time. Wait for a short time and then try your request again.

Sourcemodule ClientTokenString : sig ... end
Sourcemodule TagKeyList : sig ... end
Sourcemodule AppliedTerminologyList : sig ... end

The confidence that Amazon Comprehend accurately detected the source language is low. If a low confidence level is acceptable for your application, you can use the language in the exception to call Amazon Translate again. For more information, see the DetectDominantLanguage operation in the Amazon Comprehend Developer Guide.

The Amazon Translate service is temporarily unavailable. Wait a bit and then retry your request.

The size of the text you submitted exceeds the size limit. Reduce the size of the text or use a smaller document and then retry your request.

Sourcemodule TranslatedTextString : sig ... end

Amazon Translate does not support translation from the language of the source text into the requested target language. For more information, see Supported languages.

Sourcemodule BoundedLengthString : sig ... end
Sourcemodule TranslatedDocument : sig ... end

The translated content.

Sourcemodule Document : sig ... end

The content and content type of a document.

Sourcemodule TooManyTagsException : sig ... end

You have added too many tags to this resource. The maximum is 50 tags.

Sourcemodule TagList : sig ... end
Sourcemodule InvalidFilterException : sig ... end

The filter specified for the operation is not valid. Specify a different filter.

Sourcemodule NextToken : sig ... end
Sourcemodule MaxResultsInteger : sig ... end
Sourcemodule TextTranslationJobFilter : sig ... end

Provides information for filtering a list of translation jobs. For more information, see ListTextTranslationJobs.

Sourcemodule TerminologyPropertiesList : sig ... end
Sourcemodule DisplayLanguageCode : sig ... end
Sourcemodule LanguagesList : sig ... end

Requested display language code is not supported.

Sourcemodule TerminologyDataLocation : sig ... end

The location of the custom terminology data.

Sourcemodule MergeStrategy : sig ... end
Sourcemodule TerminologyData : sig ... end

The data associated with the custom terminology. For information about the custom terminology file, see Creating a Custom Terminology.

Sourcemodule ParallelDataDataLocation : sig ... end

The location of the most recent parallel data input file that was successfully imported into Amazon Translate.

Updates a previously created parallel data resource by importing a new input file from Amazon S3.

Sourcemodule UpdateParallelDataRequest : sig ... end

Updates a previously created parallel data resource by importing a new input file from Amazon S3.

Sourcemodule UntagResourceResponse : sig ... end

Removes a specific tag associated with an Amazon Translate resource. For more information, see Tagging your resources.

Sourcemodule UntagResourceRequest : sig ... end

Removes a specific tag associated with an Amazon Translate resource. For more information, see Tagging your resources.

Sourcemodule TranslateTextResponse : sig ... end

Translates input text from the source language to the target language. For a list of available languages and language codes, see Supported languages.

Sourcemodule TranslateTextRequest : sig ... end

Translates input text from the source language to the target language. For a list of available languages and language codes, see Supported languages.

Sourcemodule TranslateDocumentResponse : sig ... end

Translates the input document from the source language to the target language. This synchronous operation supports text, HTML, or Word documents as the input document. TranslateDocument supports translations from English to any supported language, and from any supported language to English. Therefore, specify either the source language code or the target language code as “en” (English). If you set the Formality parameter, the request will fail if the target language does not support formality. For a list of target languages that support formality, see Setting formality.

Sourcemodule TranslateDocumentRequest : sig ... end

Translates the input document from the source language to the target language. This synchronous operation supports text, HTML, or Word documents as the input document. TranslateDocument supports translations from English to any supported language, and from any supported language to English. Therefore, specify either the source language code or the target language code as “en” (English). If you set the Formality parameter, the request will fail if the target language does not support formality. For a list of target languages that support formality, see Setting formality.

Sourcemodule TagResourceResponse : sig ... end

Associates a specific tag with a resource. A tag is a key-value pair that adds as a metadata to a resource. For more information, see Tagging your resources.

Sourcemodule TagResourceRequest : sig ... end

Associates a specific tag with a resource. A tag is a key-value pair that adds as a metadata to a resource. For more information, see Tagging your resources.

Stops an asynchronous batch translation job that is in progress. If the job's state is IN_PROGRESS, the job will be marked for termination and put into the STOP_REQUESTED state. If the job completes before it can be stopped, it is put into the COMPLETED state. Otherwise, the job is put into the STOPPED state. Asynchronous batch translation jobs are started with the StartTextTranslationJob operation. You can use the DescribeTextTranslationJob or ListTextTranslationJobs operations to get a batch translation job's JobId.

Stops an asynchronous batch translation job that is in progress. If the job's state is IN_PROGRESS, the job will be marked for termination and put into the STOP_REQUESTED state. If the job completes before it can be stopped, it is put into the COMPLETED state. Otherwise, the job is put into the STOPPED state. Asynchronous batch translation jobs are started with the StartTextTranslationJob operation. You can use the DescribeTextTranslationJob or ListTextTranslationJobs operations to get a batch translation job's JobId.

Starts an asynchronous batch translation job. Use batch translation jobs to translate large volumes of text across multiple documents at once. For batch translation, you can input documents with different source languages (specify auto as the source language). You can specify one or more target languages. Batch translation translates each input document into each of the target languages. For more information, see Asynchronous batch processing. Batch translation jobs can be described with the DescribeTextTranslationJob operation, listed with the ListTextTranslationJobs operation, and stopped with the StopTextTranslationJob operation.

Starts an asynchronous batch translation job. Use batch translation jobs to translate large volumes of text across multiple documents at once. For batch translation, you can input documents with different source languages (specify auto as the source language). You can specify one or more target languages. Batch translation translates each input document into each of the target languages. For more information, see Asynchronous batch processing. Batch translation jobs can be described with the DescribeTextTranslationJob operation, listed with the ListTextTranslationJobs operation, and stopped with the StopTextTranslationJob operation.

Gets a list of the batch translation jobs that you have submitted.

Gets a list of the batch translation jobs that you have submitted.

Sourcemodule ListTerminologiesResponse : sig ... end

Provides a list of custom terminologies associated with your account.

Sourcemodule ListTerminologiesRequest : sig ... end

Provides a list of custom terminologies associated with your account.

Lists all tags associated with a given Amazon Translate resource. For more information, see Tagging your resources.

Lists all tags associated with a given Amazon Translate resource. For more information, see Tagging your resources.

Sourcemodule ListParallelDataResponse : sig ... end

Provides a list of your parallel data resources in Amazon Translate.

Sourcemodule ListParallelDataRequest : sig ... end

Provides a list of your parallel data resources in Amazon Translate.

Sourcemodule ListLanguagesResponse : sig ... end

Provides a list of languages (RFC-5646 codes and names) that Amazon Translate supports.

Sourcemodule ListLanguagesRequest : sig ... end

Provides a list of languages (RFC-5646 codes and names) that Amazon Translate supports.

Sourcemodule ImportTerminologyResponse : sig ... end

Creates or updates a custom terminology, depending on whether one already exists for the given terminology name. Importing a terminology with the same name as an existing one will merge the terminologies based on the chosen merge strategy. The only supported merge strategy is OVERWRITE, where the imported terminology overwrites the existing terminology of the same name. If you import a terminology that overwrites an existing one, the new terminology takes up to 10 minutes to fully propagate. After that, translations have access to the new terminology.

Sourcemodule ImportTerminologyRequest : sig ... end

Creates or updates a custom terminology, depending on whether one already exists for the given terminology name. Importing a terminology with the same name as an existing one will merge the terminologies based on the chosen merge strategy. The only supported merge strategy is OVERWRITE, where the imported terminology overwrites the existing terminology of the same name. If you import a terminology that overwrites an existing one, the new terminology takes up to 10 minutes to fully propagate. After that, translations have access to the new terminology.

Sourcemodule GetTerminologyResponse : sig ... end

Retrieves a custom terminology.

Sourcemodule GetTerminologyRequest : sig ... end

Retrieves a custom terminology.

Sourcemodule GetParallelDataResponse : sig ... end

Provides information about a parallel data resource.

Sourcemodule GetParallelDataRequest : sig ... end

Provides information about a parallel data resource.

Gets the properties associated with an asynchronous batch translation job including name, ID, status, source and target languages, input/output S3 buckets, and so on.

Gets the properties associated with an asynchronous batch translation job including name, ID, status, source and target languages, input/output S3 buckets, and so on.

Sourcemodule DeleteTerminologyRequest : sig ... end

A synchronous action that deletes a custom terminology.

Deletes a parallel data resource in Amazon Translate.

Sourcemodule DeleteParallelDataRequest : sig ... end

Deletes a parallel data resource in Amazon Translate.

Creates a parallel data resource in Amazon Translate by importing an input file from Amazon S3. Parallel data files contain examples that show how you want segments of text to be translated. By adding parallel data, you can influence the style, tone, and word choice in your translation output.

Sourcemodule CreateParallelDataRequest : sig ... end

Creates a parallel data resource in Amazon Translate by importing an input file from Amazon S3. Parallel data files contain examples that show how you want segments of text to be translated. By adding parallel data, you can influence the style, tone, and word choice in your translation output.