Values (p.awso.0.9.0.doc.awso.iotfleetwise.Awso

Sourceval service : Awso.Service.t

Sourceval apiVersion : string

Sourceval endpointPrefix : string

Sourceval serviceFullName : string

Sourceval signatureVersion : string

Sourceval protocol : string

Sourceval globalEndpoint : string

Sourceval targetPrefix : string

Sourceval simple_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t

Sourceval composed_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t

Sourceval to_query : ('a -> Awso.Client.Query.value) -> 'a -> Awso.Client.Query.t

Source

val structure_to_value_aux : 
  ('a * 'b option) list ->
  f:(('a * 'b) list -> 'c) ->
  [> `Structure of 'c ]

Source

val structure_to_value : 
  ('a * 'b option) list ->
  [> `Structure of ('a * 'b) list ]

Source

val structure_to_wrapped_value : 
  wrapper:'a ->
  response:'a ->
  ('b * 'c option) list ->
  [> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]

Sourcemodule AccessDeniedException : sig ... end

You don't have sufficient permission to perform this action.

Sourcemodule Message : sig ... end

Sourcemodule ListOfStrings : sig ... end

Sourcemodule Double : sig ... end

Sourcemodule Description : sig ... end

Sourcemodule NodePath : sig ... end

Sourcemodule NodeDataType : sig ... end

Sourcemodule ActuatorFullyQualifiedNameString : sig ... end

Sourcemodule Actuator : sig ... end

A signal that represents a vehicle device such as the engine, heater, and door locks. Data from an actuator reports the state of a certain vehicle device. Updating actuator data can change the state of a device. For example, you can turn on or off the heater by updating its actuator data.

Sourcemodule AmazonResourceName : sig ... end

Sourcemodule VehicleName : sig ... end

Sourcemodule FleetId : sig ... end

Sourcemodule AssociateVehicleFleetRequest : sig ... end

Adds, or associates, a vehicle with a fleet.

Sourcemodule ValidationExceptionReason : sig ... end

Sourcemodule String_ : sig ... end

Sourcemodule ValidationExceptionField : sig ... end

A validation error due to mismatch between the expected data type, length, or pattern of the parameter and the input.

Sourcemodule ValidationExceptionFieldList : sig ... end

Sourcemodule ValidationException : sig ... end

The input fails to satisfy the constraints specified by an Amazon Web Services service.

Sourcemodule RetryAfterSeconds : sig ... end

Sourcemodule ThrottlingException : sig ... end

The request couldn't be completed due to throttling.

Sourcemodule ResourceNotFoundException : sig ... end

The resource wasn't found.

Sourcemodule LimitExceededException : sig ... end

A service quota was exceeded.

Sourcemodule InternalServerException : sig ... end

The request couldn't be completed because the server temporarily failed.

Sourcemodule AssociateVehicleFleetResponse : sig ... end

Adds, or associates, a vehicle with a fleet.

Sourcemodule AttributeFullyQualifiedNameString : sig ... end

Sourcemodule Attribute : sig ... end

A signal that represents static information about the vehicle, such as engine type or manufacturing date.

Sourcemodule AttributeValue : sig ... end

Sourcemodule AttributeName : sig ... end

Sourcemodule AttributesMap : sig ... end

Sourcemodule Arn : sig ... end

Sourcemodule VehicleAssociationBehavior : sig ... end

Sourcemodule TagValue : sig ... end

Sourcemodule TagKey : sig ... end

Sourcemodule Tag : sig ... end

A set of key/value pairs that are used to manage the resource.

Sourcemodule TagList : sig ... end

Sourcemodule PositiveInteger : sig ... end

Sourcemodule TimeUnit : sig ... end

Sourcemodule TimePeriod : sig ... end

The length of time between state template updates.

Sourcemodule PeriodicStateTemplateUpdateStrategy : sig ... end

Vehicles associated with the state template will stream telemetry data during a specified time period.

Sourcemodule OnChangeStateTemplateUpdateStrategy : sig ... end

Vehicles associated with the state template will stream telemetry data when there is a change.

Sourcemodule StateTemplateUpdateStrategy : sig ... end

The update strategy for the state template. Vehicles associated with the state template can stream telemetry data with either an onChange or periodic update strategy. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule ResourceIdentifier : sig ... end

Sourcemodule StateTemplateAssociation : sig ... end

The state template associated with a vehicle. State templates contain state properties, which are signals that belong to a signal catalog that is synchronized between the Amazon Web Services IoT FleetWise Edge and the Amazon Web Services Cloud. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule StateTemplateAssociations : sig ... end

Sourcemodule CreateVehicleRequestItem : sig ... end

Information about the vehicle to create.

Sourcemodule CreateVehicleRequestItems : sig ... end

Sourcemodule BatchCreateVehicleRequest : sig ... end

Creates a group, or batch, of vehicles. You must specify a decoder manifest and a vehicle model (model manifest) for each vehicle. For more information, see Create multiple vehicles (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule CreateVehicleResponseItem : sig ... end

Information about a created vehicle.

Sourcemodule CreateVehicleResponses : sig ... end

Sourcemodule CreateVehicleError : sig ... end

An HTTP error resulting from creating a vehicle.

Sourcemodule CreateVehicleErrors : sig ... end

Sourcemodule BatchCreateVehicleResponse : sig ... end

Creates a group, or batch, of vehicles. You must specify a decoder manifest and a vehicle model (model manifest) for each vehicle. For more information, see Create multiple vehicles (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule UpdateMode : sig ... end

Sourcemodule StateTemplateAssociationIdentifiers : sig ... end

Sourcemodule UpdateVehicleRequestItem : sig ... end

Information about the vehicle to update. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule UpdateVehicleRequestItems : sig ... end

Sourcemodule BatchUpdateVehicleRequest : sig ... end

Updates a group, or batch, of vehicles. You must specify a decoder manifest and a vehicle model (model manifest) for each vehicle. For more information, see Update multiple vehicles (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule UpdateVehicleResponseItem : sig ... end

Information about the updated vehicle.

Sourcemodule UpdateVehicleResponseItems : sig ... end

Sourcemodule Number : sig ... end

Sourcemodule UpdateVehicleError : sig ... end

An HTTP error resulting from updating the description for a vehicle.

Sourcemodule UpdateVehicleErrors : sig ... end

Sourcemodule BatchUpdateVehicleResponse : sig ... end

Updates a group, or batch, of vehicles. You must specify a decoder manifest and a vehicle model (model manifest) for each vehicle. For more information, see Update multiple vehicles (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule BranchFullyQualifiedNameString : sig ... end

Sourcemodule Branch : sig ... end

A group of signals that are defined in a hierarchical structure.

Sourcemodule CampaignStatus : sig ... end

Sourcemodule Timestamp : sig ... end

Sourcemodule CampaignName : sig ... end

Sourcemodule CampaignArn : sig ... end

Sourcemodule CampaignSummary : sig ... end

Information about a campaign. You can use the API operation to return this information about multiple created campaigns.

Sourcemodule NetworkFileBlob : sig ... end

Sourcemodule NetworkFilesList : sig ... end

Sourcemodule ModelSignalsMap : sig ... end

Sourcemodule InterfaceId : sig ... end

Sourcemodule CanDbcDefinition : sig ... end

Configurations used to create a decoder manifest.

Sourcemodule ProtocolVersion : sig ... end

Sourcemodule ProtocolName : sig ... end

Sourcemodule CanInterfaceName : sig ... end

Sourcemodule CanInterface : sig ... end

A single controller area network (CAN) device interface.

Sourcemodule NonNegativeInteger : sig ... end

Sourcemodule SignalValueType : sig ... end

Sourcemodule PrimitiveBoolean : sig ... end

Sourcemodule CanSignalName : sig ... end

Sourcemodule CanSignal : sig ... end

Information about a single controller area network (CAN) signal and the messages it receives and transmits.

Sourcemodule LogType : sig ... end

Sourcemodule CloudWatchLogGroupName : sig ... end

Sourcemodule CloudWatchLogDeliveryOptions : sig ... end

The log delivery option to send data to Amazon CloudWatch Logs.

Sourcemodule CollectionPeriodMs : sig ... end

Sourcemodule TimeBasedCollectionScheme : sig ... end

Information about a collection scheme that uses a time period to decide how often to collect data.

Sourcemodule Uint32 : sig ... end

Sourcemodule LanguageVersion : sig ... end

Sourcemodule EventExpression : sig ... end

Sourcemodule TriggerMode : sig ... end

Sourcemodule ConditionBasedCollectionScheme : sig ... end

Information about a collection scheme that uses a simple logical expression to recognize what data to collect.

Sourcemodule CollectionScheme : sig ... end

Specifies what data to collect and how often or when to collect it.

Sourcemodule Compression : sig ... end

Sourcemodule FetchConfigEventExpression : sig ... end

Sourcemodule ConditionBasedSignalFetchConfig : sig ... end

Specifies the condition under which a signal fetch occurs.

Sourcemodule ConflictException : sig ... end

The request has conflicting operations. This can occur if you're trying to perform more than one operation on the same resource at the same time.

Sourcemodule Priority : sig ... end

Sourcemodule SpoolingMode : sig ... end

Sourcemodule WildcardSignalName : sig ... end

Sourcemodule MaxSampleCount : sig ... end

Sourcemodule DataPartitionId : sig ... end

Sourcemodule SignalInformation : sig ... end

Information about a signal.

Sourcemodule SignalInformationList : sig ... end

Sourcemodule PositiveLong : sig ... end

Sourcemodule TimeBasedSignalFetchConfig : sig ... end

Used to configure a frequency-based vehicle signal fetch.

Sourcemodule SignalFetchConfig : sig ... end

The configuration of the signal fetch operation. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule ActionEventExpression : sig ... end

Sourcemodule EventExpressionList : sig ... end

Sourcemodule SignalFetchInformation : sig ... end

Information about the signal to be fetched. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule SignalFetchInformationList : sig ... end

Sourcemodule DiagnosticsMode : sig ... end

Sourcemodule DataPartitionUploadOptions : sig ... end

The upload options for the data partition. If upload options are specified, you must also specify storage options. See DataPartitionStorageOptions. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule StorageMinimumTimeToLiveValue : sig ... end

Sourcemodule StorageMinimumTimeToLiveUnit : sig ... end

Sourcemodule StorageMinimumTimeToLive : sig ... end

Information about the minimum amount of time that data will be kept. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule StorageMaximumSizeValue : sig ... end

Sourcemodule StorageMaximumSizeUnit : sig ... end

Sourcemodule StorageMaximumSize : sig ... end

The maximum storage size for the data partition. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule StorageLocation : sig ... end

Sourcemodule DataPartitionStorageOptions : sig ... end

Size, time, and location options for the data partition.

Sourcemodule DataPartition : sig ... end

The configuration for signal data storage and upload options. You can only specify these options when the campaign's spooling mode is TO_DISK. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule DataPartitions : sig ... end

Sourcemodule DataExtraDimensionNodePathList : sig ... end

Sourcemodule TimestreamTableArn : sig ... end

Sourcemodule IAMRoleArn : sig ... end

Sourcemodule TimestreamConfig : sig ... end

The Amazon Timestream table where the Amazon Web Services IoT FleetWise campaign sends data. Timestream stores and organizes data to optimize query processing time and to reduce storage costs. For more information, see Data modeling in the Amazon Timestream Developer Guide.

Sourcemodule StorageCompressionFormat : sig ... end

Sourcemodule S3BucketArn : sig ... end

Sourcemodule Prefix : sig ... end

Sourcemodule DataFormat : sig ... end

Sourcemodule S3Config : sig ... end

The Amazon S3 bucket where the Amazon Web Services IoT FleetWise campaign sends data. Amazon S3 is an object storage service that stores data as objects within buckets. For more information, see Creating, configuring, and working with Amazon S3 buckets in the Amazon Simple Storage Service User Guide.

Sourcemodule MqttTopicArn : sig ... end

Sourcemodule MqttTopicConfig : sig ... end

The MQTT topic to which the Amazon Web Services IoT FleetWise campaign routes data. For more information, see Device communication protocols in the Amazon Web Services IoT Core Developer Guide. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule DataDestinationConfig : sig ... end

The destination where the campaign sends data. You can send data to an MQTT topic, or store it in Amazon S3 or Amazon Timestream.

Sourcemodule DataDestinationConfigs : sig ... end

Sourcemodule CreateCampaignRequest : sig ... end

Creates an orchestration of data collection rules. The Amazon Web Services IoT FleetWise Edge Agent software running in vehicles uses campaigns to decide how to collect and transfer data to the cloud. You create campaigns in the cloud. After you or your team approve campaigns, Amazon Web Services IoT FleetWise automatically deploys them to vehicles. For more information, see Collect and transfer data with campaigns in the Amazon Web Services IoT FleetWise Developer Guide. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule CreateCampaignResponse : sig ... end

Creates an orchestration of data collection rules. The Amazon Web Services IoT FleetWise Edge Agent software running in vehicles uses campaigns to decide how to collect and transfer data to the cloud. You create campaigns in the cloud. After you or your team approve campaigns, Amazon Web Services IoT FleetWise automatically deploys them to vehicles. For more information, see Collect and transfer data with campaigns in the Amazon Web Services IoT FleetWise Developer Guide. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule ResourceName : sig ... end

Sourcemodule SignalDecoderType : sig ... end

Sourcemodule ObdByteLength : sig ... end

Sourcemodule ObdBitmaskLength : sig ... end

Sourcemodule ObdSignal : sig ... end

Information about signal messages using the on-board diagnostics (OBD) II protocol in a vehicle.

Sourcemodule TopicName : sig ... end

Sourcemodule StructuredMessageListType : sig ... end

Sourcemodule StructureMessageName : sig ... end

Sourcemodule ROS2PrimitiveType : sig ... end

Sourcemodule ROS2PrimitiveMessageDefinitionUpperBoundLong : sig ... end

Sourcemodule ROS2PrimitiveMessageDefinition : sig ... end

Represents a ROS 2 compliant primitive type message of the complex data structure.

Sourcemodule PrimitiveMessageDefinition : sig ... end

Represents a primitive type node of the complex data structure.

module StructuredMessage : sig ... end

The structured message for the message signal. It can be defined with either a primitiveMessageDefinition, structuredMessageListDefinition, or structuredMessageDefinition recursively.

module StructuredMessageDefinition : sig ... end

module StructuredMessageFieldNameAndDataTypePair : sig ... end

Represents a StructureMessageName to DataType map element.

module StructuredMessageListDefinition : sig ... end

Represents a list type node of the complex data structure.

Sourcemodule MessageSignal : sig ... end

The decoding information for a specific message which support higher order data types.

Sourcemodule FullyQualifiedName : sig ... end

Sourcemodule CustomDecodingId : sig ... end

Sourcemodule CustomDecodingSignal : sig ... end

Information about signals using a custom decoding protocol as defined by the customer. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule SignalDecoder : sig ... end

Information about a signal decoder.

Sourcemodule SignalDecoders : sig ... end

Sourcemodule VehicleMiddlewareProtocol : sig ... end

Sourcemodule VehicleMiddlewareName : sig ... end

Sourcemodule VehicleMiddleware : sig ... end

The vehicle middleware defined as a type of network interface. Examples of vehicle middleware include ROS2 and SOME/IP.

Sourcemodule ObdStandard : sig ... end

Sourcemodule ObdInterfaceName : sig ... end

Sourcemodule ObdInterface : sig ... end

A network interface that specifies the on-board diagnostic (OBD) II network protocol.

Sourcemodule NetworkInterfaceType : sig ... end

Sourcemodule CustomDecodingSignalInterfaceName : sig ... end

Sourcemodule CustomDecodingInterface : sig ... end

Represents a custom network interface as defined by the customer. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule NetworkInterface : sig ... end

Represents a node and its specifications in an in-vehicle communication network. All signal decoders must be associated with a network node. To return this information about all the network interfaces specified in a decoder manifest, use the API operation.

Sourcemodule NetworkInterfaces : sig ... end

Sourcemodule DefaultForUnmappedSignalsType : sig ... end

Sourcemodule CreateDecoderManifestRequestModelManifestArnString : sig ... end

Sourcemodule CreateDecoderManifestRequest : sig ... end

Creates the decoder manifest associated with a model manifest. To create a decoder manifest, the following must be true: Every signal decoder has a unique name. Each signal decoder is associated with a network interface. Each network interface has a unique ID. The signal decoders are specified in the model manifest.

Sourcemodule SignalDecoderFailureReason : sig ... end

Sourcemodule InvalidSignalDecoder : sig ... end

A reason that a signal decoder isn't valid.

Sourcemodule InvalidSignalDecoders : sig ... end

Sourcemodule NetworkInterfaceFailureReason : sig ... end

Sourcemodule InvalidNetworkInterface : sig ... end

A reason a vehicle network interface isn't valid.

Sourcemodule InvalidNetworkInterfaces : sig ... end

Sourcemodule DecoderManifestValidationException : sig ... end

The request couldn't be completed because it contains signal decoders with one or more validation errors.

Sourcemodule CreateDecoderManifestResponse : sig ... end

Creates the decoder manifest associated with a model manifest. To create a decoder manifest, the following must be true: Every signal decoder has a unique name. Each signal decoder is associated with a network interface. Each network interface has a unique ID. The signal decoders are specified in the model manifest.

Sourcemodule CreateFleetRequest : sig ... end

Creates a fleet that represents a group of vehicles. You must create both a signal catalog and vehicles before you can create a fleet. For more information, see Fleets in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule CreateFleetResponse : sig ... end

Creates a fleet that represents a group of vehicles. You must create both a signal catalog and vehicles before you can create a fleet. For more information, see Fleets in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule CreateModelManifestRequestNodesList : sig ... end

Sourcemodule CreateModelManifestRequest : sig ... end

Creates a vehicle model (model manifest) that specifies signals (attributes, branches, sensors, and actuators). For more information, see Vehicle models in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule InvalidSignal : sig ... end

A reason that a signal isn't valid.

Sourcemodule InvalidSignals : sig ... end

Sourcemodule InvalidSignalsException : sig ... end

The request couldn't be completed because it contains signals that aren't valid.

Sourcemodule CreateModelManifestResponse : sig ... end

Creates a vehicle model (model manifest) that specifies signals (attributes, branches, sensors, and actuators). For more information, see Vehicle models in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule SensorFullyQualifiedNameString : sig ... end

Sourcemodule Sensor : sig ... end

An input component that reports the environmental condition of a vehicle. You can collect data about fluid levels, temperatures, vibrations, or battery voltage from sensors.

Sourcemodule CustomStructFullyQualifiedNameString : sig ... end

Sourcemodule CustomStruct : sig ... end

The custom structure represents a complex or higher-order data structure.

Sourcemodule NodeDataEncoding : sig ... end

Sourcemodule CustomPropertyFullyQualifiedNameString : sig ... end

Sourcemodule CustomProperty : sig ... end

Represents a member of the complex data structure. The data type of the property can be either primitive or another struct.

Sourcemodule Node : sig ... end

A general abstraction of a signal. A node can be specified as an actuator, attribute, branch, or sensor.

Sourcemodule Nodes : sig ... end

Sourcemodule CreateSignalCatalogRequest : sig ... end

Creates a collection of standardized signals that can be reused to create vehicle models.

Sourcemodule InvalidNodeException : sig ... end

The specified node type doesn't match the expected node type for a node. You can specify the node type as branch, sensor, actuator, or attribute.

Sourcemodule CreateSignalCatalogResponse : sig ... end

Creates a collection of standardized signals that can be reused to create vehicle models.

Sourcemodule StateTemplateProperties : sig ... end

Sourcemodule StateTemplateMetadataExtraDimensionNodePathList : sig ... end

Sourcemodule StateTemplateDataExtraDimensionNodePathList : sig ... end

Sourcemodule CreateStateTemplateRequest : sig ... end

Creates a state template. State templates contain state properties, which are signals that belong to a signal catalog that is synchronized between the Amazon Web Services IoT FleetWise Edge and the Amazon Web Services Cloud. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule ResourceUniqueId : sig ... end

Sourcemodule CreateStateTemplateResponse : sig ... end

Creates a state template. State templates contain state properties, which are signals that belong to a signal catalog that is synchronized between the Amazon Web Services IoT FleetWise Edge and the Amazon Web Services Cloud. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule CreateVehicleRequest : sig ... end

Creates a vehicle, which is an instance of a vehicle model (model manifest). Vehicles created from the same vehicle model consist of the same signals inherited from the vehicle model. If you have an existing Amazon Web Services IoT thing, you can use Amazon Web Services IoT FleetWise to create a vehicle and collect data from your thing. For more information, see Create a vehicle (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule CreateVehicleResponse : sig ... end

Creates a vehicle, which is an instance of a vehicle model (model manifest). Vehicles created from the same vehicle model consist of the same signals inherited from the vehicle model. If you have an existing Amazon Web Services IoT thing, you can use Amazon Web Services IoT FleetWise to create a vehicle and collect data from your thing. For more information, see Create a vehicle (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule ManifestStatus : sig ... end

Sourcemodule DecoderManifestSummary : sig ... end

Information about a created decoder manifest. You can use the API operation to return this information about multiple decoder manifests.

Sourcemodule DeleteCampaignRequest : sig ... end

Deletes a data collection campaign. Deleting a campaign suspends all data collection and removes it from any vehicles.

Sourcemodule DeleteCampaignResponse : sig ... end

Deletes a data collection campaign. Deleting a campaign suspends all data collection and removes it from any vehicles.

Sourcemodule DeleteDecoderManifestRequest : sig ... end

Deletes a decoder manifest. You can't delete a decoder manifest if it has vehicles associated with it.

Sourcemodule DeleteDecoderManifestResponse : sig ... end

Deletes a decoder manifest. You can't delete a decoder manifest if it has vehicles associated with it.

Sourcemodule DeleteFleetRequest : sig ... end

Deletes a fleet. Before you delete a fleet, all vehicles must be dissociated from the fleet. For more information, see Delete a fleet (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule DeleteFleetResponse : sig ... end

Deletes a fleet. Before you delete a fleet, all vehicles must be dissociated from the fleet. For more information, see Delete a fleet (AWS CLI) in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule DeleteModelManifestRequest : sig ... end

Deletes a vehicle model (model manifest).

Sourcemodule DeleteModelManifestResponse : sig ... end

Deletes a vehicle model (model manifest).

Sourcemodule DeleteSignalCatalogRequest : sig ... end

Deletes a signal catalog.

Sourcemodule DeleteSignalCatalogResponse : sig ... end

Deletes a signal catalog.

Sourcemodule DeleteStateTemplateRequest : sig ... end

Deletes a state template.

Sourcemodule DeleteStateTemplateResponse : sig ... end

Deletes a state template.

Sourcemodule DeleteVehicleRequest : sig ... end

Deletes a vehicle and removes it from any campaigns.

Sourcemodule DeleteVehicleResponse : sig ... end

Deletes a vehicle and removes it from any campaigns.

Sourcemodule DisassociateVehicleFleetRequest : sig ... end

Removes, or disassociates, a vehicle from a fleet. Disassociating a vehicle from a fleet doesn't delete the vehicle.

Sourcemodule DisassociateVehicleFleetResponse : sig ... end

Removes, or disassociates, a vehicle from a fleet. Disassociating a vehicle from a fleet doesn't delete the vehicle.

Sourcemodule EncryptionStatus : sig ... end

Sourcemodule EncryptionType : sig ... end

Sourcemodule FleetSummary : sig ... end

Information about a fleet. You can use the API operation to return this information about multiple fleets.

Sourcemodule FormattedVss : sig ... end

Vehicle Signal Specification (VSS) is a precise language used to describe and model signals in vehicle networks. The JSON file collects signal specificiations in a VSS format.

Sourcemodule Fqns : sig ... end

Sourcemodule GetCampaignRequest : sig ... end

Retrieves information about a campaign. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule GetCampaignResponse : sig ... end

Retrieves information about a campaign. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule GetDecoderManifestRequest : sig ... end

Retrieves information about a created decoder manifest.

Sourcemodule GetDecoderManifestResponse : sig ... end

Retrieves information about a created decoder manifest.

Sourcemodule GetEncryptionConfigurationRequest : sig ... end

Retrieves the encryption configuration for resources and data in Amazon Web Services IoT FleetWise.

Sourcemodule ErrorMessage : sig ... end

Sourcemodule GetEncryptionConfigurationResponse : sig ... end

Retrieves the encryption configuration for resources and data in Amazon Web Services IoT FleetWise.

Sourcemodule GetFleetRequest : sig ... end

Retrieves information about a fleet.

Sourcemodule GetFleetResponse : sig ... end

Retrieves information about a fleet.

Sourcemodule GetLoggingOptionsRequest : sig ... end

Retrieves the logging options.

Sourcemodule GetLoggingOptionsResponse : sig ... end

Retrieves the logging options.

Sourcemodule GetModelManifestRequest : sig ... end

Retrieves information about a vehicle model (model manifest).

Sourcemodule GetModelManifestResponse : sig ... end

Retrieves information about a vehicle model (model manifest).

Sourcemodule GetRegisterAccountStatusRequest : sig ... end

Retrieves information about the status of registering your Amazon Web Services account, IAM, and Amazon Timestream resources so that Amazon Web Services IoT FleetWise can transfer your vehicle data to the Amazon Web Services Cloud. For more information, including step-by-step procedures, see Setting up Amazon Web Services IoT FleetWise. This API operation doesn't require input parameters.

Sourcemodule CustomerAccountId : sig ... end

Sourcemodule TimestreamTableName : sig ... end

Sourcemodule TimestreamDatabaseName : sig ... end

Sourcemodule RegistrationStatus : sig ... end

Sourcemodule TimestreamRegistrationResponse : sig ... end

Information about the registered Amazon Timestream resources or errors, if any.

Sourcemodule IamRegistrationResponse : sig ... end

Information about registering an Identity and Access Management (IAM) resource so Amazon Web Services IoT FleetWise edge agent software can transfer your vehicle data to Amazon Timestream.

Sourcemodule GetRegisterAccountStatusResponse : sig ... end

Retrieves information about the status of registering your Amazon Web Services account, IAM, and Amazon Timestream resources so that Amazon Web Services IoT FleetWise can transfer your vehicle data to the Amazon Web Services Cloud. For more information, including step-by-step procedures, see Setting up Amazon Web Services IoT FleetWise. This API operation doesn't require input parameters.

Sourcemodule GetSignalCatalogRequest : sig ... end

Retrieves information about a signal catalog.

Sourcemodule NodeCounts : sig ... end

Information about the number of nodes and node types in a vehicle network.

Sourcemodule GetSignalCatalogResponse : sig ... end

Retrieves information about a signal catalog.

Sourcemodule GetStateTemplateRequest : sig ... end

Retrieves information about a state template. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule GetStateTemplateResponse : sig ... end

Retrieves information about a state template. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule GetVehicleRequest : sig ... end

Retrieves information about a vehicle.

Sourcemodule GetVehicleResponse : sig ... end

Retrieves information about a vehicle.

Sourcemodule NextToken : sig ... end

Sourcemodule MaxResults : sig ... end

Sourcemodule GetVehicleStatusRequest : sig ... end

Retrieves information about the status of campaigns, decoder manifests, or state templates associated with a vehicle.

Sourcemodule VehicleState : sig ... end

Sourcemodule VehicleStatus : sig ... end

Information about a campaign associated with a vehicle.

Sourcemodule VehicleStatusList : sig ... end

Sourcemodule GetVehicleStatusResponse : sig ... end

Retrieves information about the status of campaigns, decoder manifests, or state templates associated with a vehicle.

Sourcemodule IamResources : sig ... end

The IAM resource that enables Amazon Web Services IoT FleetWise edge agent software to send data to Amazon Timestream. For more information, see IAM roles in the Identity and Access Management User Guide.

Sourcemodule NetworkFileDefinition : sig ... end

Specifications for defining a vehicle network.

Sourcemodule NetworkFileDefinitions : sig ... end

Sourcemodule ImportDecoderManifestRequest : sig ... end

Creates a decoder manifest using your existing CAN DBC file from your local device. The CAN signal name must be unique and not repeated across CAN message definitions in a .dbc file.

Sourcemodule ImportDecoderManifestResponse : sig ... end

Creates a decoder manifest using your existing CAN DBC file from your local device. The CAN signal name must be unique and not repeated across CAN message definitions in a .dbc file.

Sourcemodule ImportSignalCatalogRequest : sig ... end

Creates a signal catalog using your existing VSS formatted content from your local device.

Sourcemodule ImportSignalCatalogResponse : sig ... end

Creates a signal catalog using your existing VSS formatted content from your local device.

Sourcemodule InterfaceIds : sig ... end

Sourcemodule StatusStr : sig ... end

Sourcemodule ListResponseScope : sig ... end

Sourcemodule ListCampaignsRequest : sig ... end

Lists information about created campaigns. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule CampaignSummaries : sig ... end

Sourcemodule ListCampaignsResponse : sig ... end

Lists information about created campaigns. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListDecoderManifestNetworkInterfacesRequest : sig ... end

Lists the network interfaces specified in a decoder manifest. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListDecoderManifestNetworkInterfacesResponse : sig ... end

Lists the network interfaces specified in a decoder manifest. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListDecoderManifestSignalsRequest : sig ... end

A list of information about signal decoders specified in a decoder manifest. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListDecoderManifestSignalsResponse : sig ... end

A list of information about signal decoders specified in a decoder manifest. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListDecoderManifestsRequest : sig ... end

Lists decoder manifests. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule DecoderManifestSummaries : sig ... end

Sourcemodule ListDecoderManifestsResponse : sig ... end

Lists decoder manifests. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListFleetsForVehicleRequest : sig ... end

Retrieves a list of IDs for all fleets that the vehicle is associated with. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule Fleets : sig ... end

Sourcemodule ListFleetsForVehicleResponse : sig ... end

Retrieves a list of IDs for all fleets that the vehicle is associated with. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListFleetsRequest : sig ... end

Retrieves information for each created fleet in an Amazon Web Services account. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule FleetSummaries : sig ... end

Sourcemodule ListFleetsResponse : sig ... end

Retrieves information for each created fleet in an Amazon Web Services account. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListModelManifestNodesRequest : sig ... end

Lists information about nodes specified in a vehicle model (model manifest). This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListModelManifestNodesResponse : sig ... end

Lists information about nodes specified in a vehicle model (model manifest). This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListModelManifestsRequest : sig ... end

Retrieves a list of vehicle models (model manifests). This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ModelManifestSummary : sig ... end

Information about a vehicle model (model manifest). You can use the API operation to return this information about multiple vehicle models.

Sourcemodule ModelManifestSummaries : sig ... end

Sourcemodule ListModelManifestsResponse : sig ... end

Retrieves a list of vehicle models (model manifests). This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule SignalNodeType : sig ... end

Sourcemodule ListSignalCatalogNodesRequest : sig ... end

Lists of information about the signals (nodes) specified in a signal catalog. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListSignalCatalogNodesResponse : sig ... end

Lists of information about the signals (nodes) specified in a signal catalog. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListSignalCatalogsRequest : sig ... end

Lists all the created signal catalogs in an Amazon Web Services account. You can use to list information about each signal (node) specified in a signal catalog. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule SignalCatalogSummary : sig ... end

Information about a collection of standardized signals, which can be attributes, branches, sensors, or actuators.

Sourcemodule SignalCatalogSummaries : sig ... end

Sourcemodule ListSignalCatalogsResponse : sig ... end

Lists all the created signal catalogs in an Amazon Web Services account. You can use to list information about each signal (node) specified in a signal catalog. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListStateTemplatesRequest : sig ... end

Lists information about created state templates. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule StateTemplateSummary : sig ... end

Information about a state template. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule StateTemplateSummaries : sig ... end

Sourcemodule ListStateTemplatesResponse : sig ... end

Lists information about created state templates. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule ListTagsForResourceRequest : sig ... end

Lists the tags (metadata) you have assigned to the resource.

Sourcemodule ListTagsForResourceResponse : sig ... end

Lists the tags (metadata) you have assigned to the resource.

Sourcemodule ListVehiclesInFleetRequest : sig ... end

Retrieves a list of summaries of all vehicles associated with a fleet. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule Vehicles : sig ... end

Sourcemodule ListVehiclesInFleetResponse : sig ... end

Retrieves a list of summaries of all vehicles associated with a fleet. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule ListVehiclesMaxResults : sig ... end

Sourcemodule AttributeValuesList : sig ... end

Sourcemodule AttributeNamesList : sig ... end

Sourcemodule ListVehiclesRequest : sig ... end

Retrieves a list of summaries of created vehicles. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule VehicleSummary : sig ... end

Information about a vehicle. To return this information about vehicles in your account, you can use the API operation.

Sourcemodule VehicleSummaries : sig ... end

Sourcemodule ListVehiclesResponse : sig ... end

Retrieves a list of summaries of created vehicles. This API operation uses pagination. Specify the nextToken parameter in the request to return more results.

Sourcemodule NodePaths : sig ... end

Sourcemodule PutEncryptionConfigurationRequestKmsKeyIdString : sig ... end

Sourcemodule PutEncryptionConfigurationRequest : sig ... end

Creates or updates the encryption configuration. Amazon Web Services IoT FleetWise can encrypt your data and resources using an Amazon Web Services managed key. Or, you can use a KMS key that you own and manage. For more information, see Data encryption in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule PutEncryptionConfigurationResponse : sig ... end

Creates or updates the encryption configuration. Amazon Web Services IoT FleetWise can encrypt your data and resources using an Amazon Web Services managed key. Or, you can use a KMS key that you own and manage. For more information, see Data encryption in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule PutLoggingOptionsRequest : sig ... end

Creates or updates the logging option.

Sourcemodule PutLoggingOptionsResponse : sig ... end

Creates or updates the logging option.

Sourcemodule TimestreamResources : sig ... end

The registered Amazon Timestream resources that Amazon Web Services IoT FleetWise edge agent software can transfer your vehicle data to.

Sourcemodule RegisterAccountRequest : sig ... end

This API operation contains deprecated parameters. Register your account again without the Timestream resources parameter so that Amazon Web Services IoT FleetWise can remove the Timestream metadata stored. You should then pass the data destination into the CreateCampaign API operation. You must delete any existing campaigns that include an empty data destination before you register your account again. For more information, see the DeleteCampaign API operation. If you want to delete the Timestream inline policy from the service-linked role, such as to mitigate an overly permissive policy, you must first delete any existing campaigns. Then delete the service-linked role and register your account again to enable CloudWatch metrics. For more information, see DeleteServiceLinkedRole in the Identity and Access Management API Reference. Registers your Amazon Web Services account, IAM, and Amazon Timestream resources so Amazon Web Services IoT FleetWise can transfer your vehicle data to the Amazon Web Services Cloud. For more information, including step-by-step procedures, see Setting up Amazon Web Services IoT FleetWise. An Amazon Web Services account is not the same thing as a "user." An Amazon Web Services user is an identity that you create using Identity and Access Management (IAM) and takes the form of either an IAM user or an IAM role, both with credentials. A single Amazon Web Services account can, and typically does, contain many users and roles.

Sourcemodule RegisterAccountResponse : sig ... end

This API operation contains deprecated parameters. Register your account again without the Timestream resources parameter so that Amazon Web Services IoT FleetWise can remove the Timestream metadata stored. You should then pass the data destination into the CreateCampaign API operation. You must delete any existing campaigns that include an empty data destination before you register your account again. For more information, see the DeleteCampaign API operation. If you want to delete the Timestream inline policy from the service-linked role, such as to mitigate an overly permissive policy, you must first delete any existing campaigns. Then delete the service-linked role and register your account again to enable CloudWatch metrics. For more information, see DeleteServiceLinkedRole in the Identity and Access Management API Reference. Registers your Amazon Web Services account, IAM, and Amazon Timestream resources so Amazon Web Services IoT FleetWise can transfer your vehicle data to the Amazon Web Services Cloud. For more information, including step-by-step procedures, see Setting up Amazon Web Services IoT FleetWise. An Amazon Web Services account is not the same thing as a "user." An Amazon Web Services user is an identity that you create using Identity and Access Management (IAM) and takes the form of either an IAM user or an IAM role, both with credentials. A single Amazon Web Services account can, and typically does, contain many users and roles.

Sourcemodule TagKeyList : sig ... end

Sourcemodule TagResourceRequest : sig ... end

Adds to or modifies the tags of the given resource. Tags are metadata which can be used to manage a resource.

Sourcemodule TagResourceResponse : sig ... end

Adds to or modifies the tags of the given resource. Tags are metadata which can be used to manage a resource.

Sourcemodule UntagResourceRequest : sig ... end

Removes the given tags (metadata) from the resource.

Sourcemodule UntagResourceResponse : sig ... end

Removes the given tags (metadata) from the resource.

Sourcemodule UpdateCampaignAction : sig ... end

Sourcemodule UpdateCampaignRequest : sig ... end

Updates a campaign.

Sourcemodule UpdateCampaignResponse : sig ... end

Updates a campaign.

Sourcemodule UpdateDecoderManifestRequest : sig ... end

Updates a decoder manifest. A decoder manifest can only be updated when the status is DRAFT. Only ACTIVE decoder manifests can be associated with vehicles.

Sourcemodule UpdateDecoderManifestResponse : sig ... end

Updates a decoder manifest. A decoder manifest can only be updated when the status is DRAFT. Only ACTIVE decoder manifests can be associated with vehicles.

Sourcemodule UpdateFleetRequest : sig ... end

Updates the description of an existing fleet.

Sourcemodule UpdateFleetResponse : sig ... end

Updates the description of an existing fleet.

Sourcemodule UpdateModelManifestRequest : sig ... end

Updates a vehicle model (model manifest). If created vehicles are associated with a vehicle model, it can't be updated.

Sourcemodule UpdateModelManifestResponse : sig ... end

Updates a vehicle model (model manifest). If created vehicles are associated with a vehicle model, it can't be updated.

Sourcemodule UpdateSignalCatalogRequest : sig ... end

Updates a signal catalog.

Sourcemodule UpdateSignalCatalogResponse : sig ... end

Updates a signal catalog.

Sourcemodule UpdateStateTemplateRequest : sig ... end

Updates a state template. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule UpdateStateTemplateResponse : sig ... end

Updates a state template. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule UpdateVehicleRequest : sig ... end

Updates a vehicle. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.

Sourcemodule UpdateVehicleResponse : sig ... end

Updates a vehicle. Access to certain Amazon Web Services IoT FleetWise features is currently gated. For more information, see Amazon Web Services Region and feature availability in the Amazon Web Services IoT FleetWise Developer Guide.