Values.OntapFileSystemConfigurationSourceConfiguration for the FSx for NetApp ONTAP file system.
type nonrec t = {automaticBackupRetentionDays : AutomaticBackupRetentionDays.t option;dailyAutomaticBackupStartTime : DailyTime.t option;deploymentType : OntapDeploymentType.t option;Specifies the FSx for ONTAP file system deployment type in use in the file system. MULTI_AZ_1 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. This is a first-generation FSx for ONTAP file system. MULTI_AZ_2 - A high availability file system configured for Multi-AZ redundancy to tolerate temporary AZ unavailability. This is a second-generation FSx for ONTAP file system. SINGLE_AZ_1 - A file system configured for Single-AZ redundancy. This is a first-generation FSx for ONTAP file system. SINGLE_AZ_2 - A file system configured with multiple high-availability (HA) pairs for Single-AZ redundancy. This is a second-generation FSx for ONTAP file system. For information about the use cases for Multi-AZ and Single-AZ deployments, refer to Choosing Multi-AZ or Single-AZ file system deployment.
*)endpointIpAddressRange : IpAddressRange.t option;(Multi-AZ only) Specifies the IPv4 address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API, Amazon FSx selects an unused IP address range for you from the 198.19.* range. By default in the Amazon FSx console, Amazon FSx chooses the last 64 IP addresses from the VPC’s primary CIDR range to use as the endpoint IP address range for the file system. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables.
*)endpoints : FileSystemEndpoints.t option;The Management and Intercluster endpoints that are used to access data or to manage the file system using the NetApp ONTAP CLI, REST API, or NetApp SnapMirror.
*)diskIopsConfiguration : DiskIopsConfiguration.t option;The SSD IOPS configuration for the ONTAP file system, specifying the number of provisioned IOPS and the provision mode.
*)preferredSubnetId : SubnetId.t option;routeTableIds : RouteTableIds.t option;(Multi-AZ only) The VPC route tables in which your file system's endpoints are created.
*)throughputCapacity : MegabytesPerSecond.t option;weeklyMaintenanceStartTime : WeeklyTime.t option;fsxAdminPassword : AdminPassword.t option;You can use the fsxadmin user account to access the NetApp ONTAP CLI and REST API. The password value is always redacted in the response.
*)hAPairs : HAPairs.t option;Specifies how many high-availability (HA) file server pairs the file system will have. The default value is 1. The value of this property affects the values of StorageCapacity, Iops, and ThroughputCapacity. For more information, see High-availability (HA) pairs in the FSx for ONTAP user guide. Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions: The value of HAPairs is less than 1 or greater than 12. The value of HAPairs is greater than 1 and the value of DeploymentType is SINGLE_AZ_1, MULTI_AZ_1, or MULTI_AZ_2.
*)throughputCapacityPerHAPair : ThroughputCapacityPerHAPair.t option;Use to choose the throughput capacity per HA pair. When the value of HAPairs is equal to 1, the value of ThroughputCapacityPerHAPair is the total throughput for the file system. This field and ThroughputCapacity cannot be defined in the same API call, but one is required. This field and ThroughputCapacity are the same for file systems with one HA pair. For SINGLE_AZ_1 and MULTI_AZ_1 file systems, valid values are 128, 256, 512, 1024, 2048, or 4096 MBps. For SINGLE_AZ_2, valid values are 1536, 3072, or 6144 MBps. For MULTI_AZ_2, valid values are 384, 768, 1536, 3072, or 6144 MBps. Amazon FSx responds with an HTTP status code 400 (Bad Request) for the following conditions: The value of ThroughputCapacity and ThroughputCapacityPerHAPair are not the same value. The value of deployment type is SINGLE_AZ_2 and ThroughputCapacity / ThroughputCapacityPerHAPair is not a valid HA pair (a value between 1 and 12). The value of ThroughputCapacityPerHAPair is not a valid value.
*)endpointIpv6AddressRange : Ipv6AddressRange.t option;(Multi-AZ only) Specifies the IPv6 address range in which the endpoints to access your file system will be created. By default in the Amazon FSx API and Amazon FSx console, Amazon FSx selects an available /118 IP address range for you from one of the VPC's CIDR ranges. You can have overlapping endpoint IP addresses for file systems deployed in the same VPC/route tables, as long as they don't overlap with any subnet.
*)}val make :
?automaticBackupRetentionDays:??? ->
?dailyAutomaticBackupStartTime:??? ->
?deploymentType:??? ->
?endpointIpAddressRange:??? ->
?endpoints:??? ->
?diskIopsConfiguration:??? ->
?preferredSubnetId:??? ->
?routeTableIds:??? ->
?throughputCapacity:??? ->
?weeklyMaintenanceStartTime:??? ->
?fsxAdminPassword:??? ->
?hAPairs:??? ->
?throughputCapacityPerHAPair:??? ->
?endpointIpv6AddressRange:??? ->
unit ->
tval to_value :
t ->
[> `Structure of
(string
* [> `Enum of string
| `Integer of AutomaticBackupRetentionDays.t
| `List of [> `String of RouteTableId.t ] list
| `String of DailyTime.t
| `Structure of
(string
* [> `Enum of string
| `Long of Iops.t
| `Structure of
(string
* [> `List of [> `String of IpAddress.t ] list
| `String of DNSName.t ])
list ])
list ])
list ]