Module Values_3.ModifyVpnTunnelOptionsSpecificationSource

The Amazon Web Services Site-to-Site VPN tunnel options to modify.

Sourcetype nonrec t = {
  1. tunnelInsideCidr : Values_0.String_.t option;
    (*

    The range of inside IPv4 addresses for the tunnel. Any specified CIDR blocks must be unique across all VPN connections that use the same virtual private gateway. Constraints: A size /30 CIDR block from the 169.254.0.0/16 range. The following CIDR blocks are reserved and cannot be used: 169.254.0.0/30 169.254.1.0/30 169.254.2.0/30 169.254.3.0/30 169.254.4.0/30 169.254.5.0/30 169.254.169.252/30

    *)
  2. tunnelInsideIpv6Cidr : Values_0.String_.t option;
    (*

    The range of inside IPv6 addresses for the tunnel. Any specified CIDR blocks must be unique across all VPN connections that use the same transit gateway. Constraints: A size /126 CIDR block from the local fd00::/8 range.

    *)
  3. preSharedKey : Values_0.PreSharedKey.t option;
    (*

    The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and the customer gateway. Constraints: Allowed characters are alphanumeric characters, periods (.), and underscores (_). Must be between 8 and 64 characters in length and cannot start with zero (0).

    *)
  4. phase1LifetimeSeconds : Values_0.Integer.t option;
    (*

    The lifetime for phase 1 of the IKE negotiation, in seconds. Constraints: A value between 900 and 28,800. Default: 28800

    *)
  5. phase2LifetimeSeconds : Values_0.Integer.t option;
    (*

    The lifetime for phase 2 of the IKE negotiation, in seconds. Constraints: A value between 900 and 3,600. The value must be less than the value for Phase1LifetimeSeconds. Default: 3600

    *)
  6. rekeyMarginTimeSeconds : Values_0.Integer.t option;
    (*

    The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey. The exact time of the rekey is randomly selected based on the value for RekeyFuzzPercentage. Constraints: A value between 60 and half of Phase2LifetimeSeconds. Default: 270

    *)
  7. rekeyFuzzPercentage : Values_0.Integer.t option;
    (*

    The percentage of the rekey window (determined by RekeyMarginTimeSeconds) during which the rekey time is randomly selected. Constraints: A value between 0 and 100. Default: 100

    *)
  8. replayWindowSize : Values_0.Integer.t option;
    (*

    The number of packets in an IKE replay window. Constraints: A value between 64 and 2048. Default: 1024

    *)
  9. dPDTimeoutSeconds : Values_0.Integer.t option;
    (*

    The number of seconds after which a DPD timeout occurs. A DPD timeout of 40 seconds means that the VPN endpoint will consider the peer dead 30 seconds after the first failed keep-alive. Constraints: A value greater than or equal to 30. Default: 40

    *)
  10. dPDTimeoutAction : Values_0.String_.t option;
    (*

    The action to take after DPD timeout occurs. Specify restart to restart the IKE initiation. Specify clear to end the IKE session. Valid Values: clear | none | restart Default: clear

    *)
  11. phase1EncryptionAlgorithms : Values_1.Phase1EncryptionAlgorithmsRequestList.t option;
    (*

    One or more encryption algorithms that are permitted for the VPN tunnel for phase 1 IKE negotiations. Valid values: AES128 | AES256 | AES128-GCM-16 | AES256-GCM-16

    *)
  12. phase2EncryptionAlgorithms : Values_1.Phase2EncryptionAlgorithmsRequestList.t option;
    (*

    One or more encryption algorithms that are permitted for the VPN tunnel for phase 2 IKE negotiations. Valid values: AES128 | AES256 | AES128-GCM-16 | AES256-GCM-16

    *)
  13. phase1IntegrityAlgorithms : Values_1.Phase1IntegrityAlgorithmsRequestList.t option;
    (*

    One or more integrity algorithms that are permitted for the VPN tunnel for phase 1 IKE negotiations. Valid values: SHA1 | SHA2-256 | SHA2-384 | SHA2-512

    *)
  14. phase2IntegrityAlgorithms : Values_1.Phase2IntegrityAlgorithmsRequestList.t option;
    (*

    One or more integrity algorithms that are permitted for the VPN tunnel for phase 2 IKE negotiations. Valid values: SHA1 | SHA2-256 | SHA2-384 | SHA2-512

    *)
  15. phase1DHGroupNumbers : Values_1.Phase1DHGroupNumbersRequestList.t option;
    (*

    One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel for phase 1 IKE negotiations. Valid values: 2 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24

    *)
  16. phase2DHGroupNumbers : Values_1.Phase2DHGroupNumbersRequestList.t option;
    (*

    One or more Diffie-Hellman group numbers that are permitted for the VPN tunnel for phase 2 IKE negotiations. Valid values: 2 | 5 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24

    *)
  17. iKEVersions : Values_1.IKEVersionsRequestList.t option;
    (*

    The IKE versions that are permitted for the VPN tunnel. Valid values: ikev1 | ikev2

    *)
  18. startupAction : Values_0.String_.t option;
    (*

    The action to take when the establishing the tunnel for the VPN connection. By default, your customer gateway device must initiate the IKE negotiation and bring up the tunnel. Specify start for Amazon Web Services to initiate the IKE negotiation. Valid Values: add | start Default: add

    *)
  19. logOptions : Values_1.VpnTunnelLogOptionsSpecification.t option;
    (*

    Options for logging VPN tunnel activity.

    *)
  20. enableTunnelLifecycleControl : Values_0.Boolean.t option;
    (*

    Turn on or off tunnel endpoint lifecycle control feature.

    *)
}
Sourceval make : ?tunnelInsideCidr:??? -> ?tunnelInsideIpv6Cidr:??? -> ?preSharedKey:??? -> ?phase1LifetimeSeconds:??? -> ?phase2LifetimeSeconds:??? -> ?rekeyMarginTimeSeconds:??? -> ?rekeyFuzzPercentage:??? -> ?replayWindowSize:??? -> ?dPDTimeoutSeconds:??? -> ?dPDTimeoutAction:??? -> ?phase1EncryptionAlgorithms:??? -> ?phase2EncryptionAlgorithms:??? -> ?phase1IntegrityAlgorithms:??? -> ?phase2IntegrityAlgorithms:??? -> ?phase1DHGroupNumbers:??? -> ?phase2DHGroupNumbers:??? -> ?iKEVersions:??? -> ?startupAction:??? -> ?logOptions:??? -> ?enableTunnelLifecycleControl:??? -> unit -> t
Sourceval to_value : t -> [> `Structure of (string * [> `Boolean of Values_0.Boolean.t | `Integer of Values_0.Integer.t | `List of [> `Structure of (string * [> `Integer of int | `String of string ]) list ] list | `String of Values_0.String_.t | `Structure of (string * [> `Structure of (string * [> `Boolean of bool | `String of string ]) list ]) list ]) list ]
Sourceval to_query : t -> Awso.Client.Query.t
Sourceval of_xml : Awso.Xml.t -> t
Sourceval of_string : string -> t
Sourceval of_json : Yojson.Safe.t -> t
Sourceval to_json : t -> Yojson.Safe.t