Awso_ses_async (p.awso-async.0.9.0.doc.awso-async.ses.Awso_ses

Source

val clone_receipt_rule_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CloneReceiptRuleSetRequest.t ->
  (Awso_ses.Values.CloneReceiptRuleSetResponse.t,
    Awso_ses.Values.CloneReceiptRuleSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val create_configuration_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateConfigurationSetRequest.t ->
  (Awso_ses.Values.CreateConfigurationSetResponse.t,
    Awso_ses.Values.CreateConfigurationSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val create_configuration_set_event_destination : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateConfigurationSetEventDestinationRequest.t ->
  (Awso_ses.Values.CreateConfigurationSetEventDestinationResponse.t,
    Awso_ses.Values.CreateConfigurationSetEventDestinationResponse.error)
    Result.t
    Async.Deferred.t

Source

val create_configuration_set_tracking_options : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateConfigurationSetTrackingOptionsRequest.t ->
  (Awso_ses.Values.CreateConfigurationSetTrackingOptionsResponse.t,
    Awso_ses.Values.CreateConfigurationSetTrackingOptionsResponse.error)
    Result.t
    Async.Deferred.t

Source

val create_custom_verification_email_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateCustomVerificationEmailTemplateRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val create_receipt_filter : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateReceiptFilterRequest.t ->
  (Awso_ses.Values.CreateReceiptFilterResponse.t,
    Awso_ses.Values.CreateReceiptFilterResponse.error)
    Result.t
    Async.Deferred.t

Source

val create_receipt_rule : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateReceiptRuleRequest.t ->
  (Awso_ses.Values.CreateReceiptRuleResponse.t,
    Awso_ses.Values.CreateReceiptRuleResponse.error)
    Result.t
    Async.Deferred.t

Source

val create_receipt_rule_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateReceiptRuleSetRequest.t ->
  (Awso_ses.Values.CreateReceiptRuleSetResponse.t,
    Awso_ses.Values.CreateReceiptRuleSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val create_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.CreateTemplateRequest.t ->
  (Awso_ses.Values.CreateTemplateResponse.t,
    Awso_ses.Values.CreateTemplateResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_configuration_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteConfigurationSetRequest.t ->
  (Awso_ses.Values.DeleteConfigurationSetResponse.t,
    Awso_ses.Values.DeleteConfigurationSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_configuration_set_event_destination : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteConfigurationSetEventDestinationRequest.t ->
  (Awso_ses.Values.DeleteConfigurationSetEventDestinationResponse.t,
    Awso_ses.Values.DeleteConfigurationSetEventDestinationResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_configuration_set_tracking_options : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteConfigurationSetTrackingOptionsRequest.t ->
  (Awso_ses.Values.DeleteConfigurationSetTrackingOptionsResponse.t,
    Awso_ses.Values.DeleteConfigurationSetTrackingOptionsResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_custom_verification_email_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteCustomVerificationEmailTemplateRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val delete_identity : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteIdentityRequest.t ->
  (Awso_ses.Values.DeleteIdentityResponse.t,
    Awso_ses.Values.DeleteIdentityResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_identity_policy : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteIdentityPolicyRequest.t ->
  (Awso_ses.Values.DeleteIdentityPolicyResponse.t,
    Awso_ses.Values.DeleteIdentityPolicyResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_receipt_filter : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteReceiptFilterRequest.t ->
  (Awso_ses.Values.DeleteReceiptFilterResponse.t,
    Awso_ses.Values.DeleteReceiptFilterResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_receipt_rule : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteReceiptRuleRequest.t ->
  (Awso_ses.Values.DeleteReceiptRuleResponse.t,
    Awso_ses.Values.DeleteReceiptRuleResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_receipt_rule_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteReceiptRuleSetRequest.t ->
  (Awso_ses.Values.DeleteReceiptRuleSetResponse.t,
    Awso_ses.Values.DeleteReceiptRuleSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteTemplateRequest.t ->
  (Awso_ses.Values.DeleteTemplateResponse.t,
    Awso_ses.Values.DeleteTemplateResponse.error)
    Result.t
    Async.Deferred.t

Source

val delete_verified_email_address : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DeleteVerifiedEmailAddressRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val describe_active_receipt_rule_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DescribeActiveReceiptRuleSetRequest.t ->
  (Awso_ses.Values.DescribeActiveReceiptRuleSetResponse.t,
    Awso_ses.Values.DescribeActiveReceiptRuleSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val describe_configuration_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DescribeConfigurationSetRequest.t ->
  (Awso_ses.Values.DescribeConfigurationSetResponse.t,
    Awso_ses.Values.DescribeConfigurationSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val describe_receipt_rule : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DescribeReceiptRuleRequest.t ->
  (Awso_ses.Values.DescribeReceiptRuleResponse.t,
    Awso_ses.Values.DescribeReceiptRuleResponse.error)
    Result.t
    Async.Deferred.t

Source

val describe_receipt_rule_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.DescribeReceiptRuleSetRequest.t ->
  (Awso_ses.Values.DescribeReceiptRuleSetResponse.t,
    Awso_ses.Values.DescribeReceiptRuleSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_account_sending_enabled : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  unit ->
  (Awso_ses.Values.GetAccountSendingEnabledResponse.t,
    Awso_ses.Values.GetAccountSendingEnabledResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_custom_verification_email_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.GetCustomVerificationEmailTemplateRequest.t ->
  (Awso_ses.Values.GetCustomVerificationEmailTemplateResponse.t,
    Awso_ses.Values.GetCustomVerificationEmailTemplateResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_identity_dkim_attributes : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.GetIdentityDkimAttributesRequest.t ->
  (Awso_ses.Values.GetIdentityDkimAttributesResponse.t,
    Awso_ses.Values.GetIdentityDkimAttributesResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_identity_mail_from_domain_attributes : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.GetIdentityMailFromDomainAttributesRequest.t ->
  (Awso_ses.Values.GetIdentityMailFromDomainAttributesResponse.t,
    Awso_ses.Values.GetIdentityMailFromDomainAttributesResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_identity_notification_attributes : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.GetIdentityNotificationAttributesRequest.t ->
  (Awso_ses.Values.GetIdentityNotificationAttributesResponse.t,
    Awso_ses.Values.GetIdentityNotificationAttributesResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_identity_policies : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.GetIdentityPoliciesRequest.t ->
  (Awso_ses.Values.GetIdentityPoliciesResponse.t,
    Awso_ses.Values.GetIdentityPoliciesResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_identity_verification_attributes : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.GetIdentityVerificationAttributesRequest.t ->
  (Awso_ses.Values.GetIdentityVerificationAttributesResponse.t,
    Awso_ses.Values.GetIdentityVerificationAttributesResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_send_quota : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  unit ->
  (Awso_ses.Values.GetSendQuotaResponse.t,
    Awso_ses.Values.GetSendQuotaResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_send_statistics : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  unit ->
  (Awso_ses.Values.GetSendStatisticsResponse.t,
    Awso_ses.Values.GetSendStatisticsResponse.error)
    Result.t
    Async.Deferred.t

Source

val get_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.GetTemplateRequest.t ->
  (Awso_ses.Values.GetTemplateResponse.t,
    Awso_ses.Values.GetTemplateResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_configuration_sets : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ListConfigurationSetsRequest.t ->
  (Awso_ses.Values.ListConfigurationSetsResponse.t,
    Awso_ses.Values.ListConfigurationSetsResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_custom_verification_email_templates : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ListCustomVerificationEmailTemplatesRequest.t ->
  (Awso_ses.Values.ListCustomVerificationEmailTemplatesResponse.t,
    Awso_ses.Values.ListCustomVerificationEmailTemplatesResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_identities : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ListIdentitiesRequest.t ->
  (Awso_ses.Values.ListIdentitiesResponse.t,
    Awso_ses.Values.ListIdentitiesResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_identity_policies : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ListIdentityPoliciesRequest.t ->
  (Awso_ses.Values.ListIdentityPoliciesResponse.t,
    Awso_ses.Values.ListIdentityPoliciesResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_receipt_filters : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ListReceiptFiltersRequest.t ->
  (Awso_ses.Values.ListReceiptFiltersResponse.t,
    Awso_ses.Values.ListReceiptFiltersResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_receipt_rule_sets : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ListReceiptRuleSetsRequest.t ->
  (Awso_ses.Values.ListReceiptRuleSetsResponse.t,
    Awso_ses.Values.ListReceiptRuleSetsResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_templates : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ListTemplatesRequest.t ->
  (Awso_ses.Values.ListTemplatesResponse.t,
    Awso_ses.Values.ListTemplatesResponse.error)
    Result.t
    Async.Deferred.t

Source

val list_verified_email_addresses : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  unit ->
  (Awso_ses.Values.ListVerifiedEmailAddressesResponse.t,
    Awso_ses.Values.ListVerifiedEmailAddressesResponse.error)
    Result.t
    Async.Deferred.t

Source

val put_configuration_set_delivery_options : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.PutConfigurationSetDeliveryOptionsRequest.t ->
  (Awso_ses.Values.PutConfigurationSetDeliveryOptionsResponse.t,
    Awso_ses.Values.PutConfigurationSetDeliveryOptionsResponse.error)
    Result.t
    Async.Deferred.t

Source

val put_identity_policy : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.PutIdentityPolicyRequest.t ->
  (Awso_ses.Values.PutIdentityPolicyResponse.t,
    Awso_ses.Values.PutIdentityPolicyResponse.error)
    Result.t
    Async.Deferred.t

Source

val reorder_receipt_rule_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.ReorderReceiptRuleSetRequest.t ->
  (Awso_ses.Values.ReorderReceiptRuleSetResponse.t,
    Awso_ses.Values.ReorderReceiptRuleSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val send_bounce : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SendBounceRequest.t ->
  (Awso_ses.Values.SendBounceResponse.t,
    Awso_ses.Values.SendBounceResponse.error)
    Result.t
    Async.Deferred.t

Source

val send_bulk_templated_email : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SendBulkTemplatedEmailRequest.t ->
  (Awso_ses.Values.SendBulkTemplatedEmailResponse.t,
    Awso_ses.Values.SendBulkTemplatedEmailResponse.error)
    Result.t
    Async.Deferred.t

Source

val send_custom_verification_email : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SendCustomVerificationEmailRequest.t ->
  (Awso_ses.Values.SendCustomVerificationEmailResponse.t,
    Awso_ses.Values.SendCustomVerificationEmailResponse.error)
    Result.t
    Async.Deferred.t

Source

val send_email : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SendEmailRequest.t ->
  (Awso_ses.Values.SendEmailResponse.t,
    Awso_ses.Values.SendEmailResponse.error)
    Result.t
    Async.Deferred.t

Source

val send_raw_email : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SendRawEmailRequest.t ->
  (Awso_ses.Values.SendRawEmailResponse.t,
    Awso_ses.Values.SendRawEmailResponse.error)
    Result.t
    Async.Deferred.t

Source

val send_templated_email : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SendTemplatedEmailRequest.t ->
  (Awso_ses.Values.SendTemplatedEmailResponse.t,
    Awso_ses.Values.SendTemplatedEmailResponse.error)
    Result.t
    Async.Deferred.t

Source

val set_active_receipt_rule_set : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SetActiveReceiptRuleSetRequest.t ->
  (Awso_ses.Values.SetActiveReceiptRuleSetResponse.t,
    Awso_ses.Values.SetActiveReceiptRuleSetResponse.error)
    Result.t
    Async.Deferred.t

Source

val set_identity_dkim_enabled : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SetIdentityDkimEnabledRequest.t ->
  (Awso_ses.Values.SetIdentityDkimEnabledResponse.t,
    Awso_ses.Values.SetIdentityDkimEnabledResponse.error)
    Result.t
    Async.Deferred.t

Source

val set_identity_feedback_forwarding_enabled : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SetIdentityFeedbackForwardingEnabledRequest.t ->
  (Awso_ses.Values.SetIdentityFeedbackForwardingEnabledResponse.t,
    Awso_ses.Values.SetIdentityFeedbackForwardingEnabledResponse.error)
    Result.t
    Async.Deferred.t

Source

val set_identity_headers_in_notifications_enabled : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SetIdentityHeadersInNotificationsEnabledRequest.t ->
  (Awso_ses.Values.SetIdentityHeadersInNotificationsEnabledResponse.t,
    Awso_ses.Values.SetIdentityHeadersInNotificationsEnabledResponse.error)
    Result.t
    Async.Deferred.t

Source

val set_identity_mail_from_domain : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SetIdentityMailFromDomainRequest.t ->
  (Awso_ses.Values.SetIdentityMailFromDomainResponse.t,
    Awso_ses.Values.SetIdentityMailFromDomainResponse.error)
    Result.t
    Async.Deferred.t

Source

val set_identity_notification_topic : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SetIdentityNotificationTopicRequest.t ->
  (Awso_ses.Values.SetIdentityNotificationTopicResponse.t,
    Awso_ses.Values.SetIdentityNotificationTopicResponse.error)
    Result.t
    Async.Deferred.t

Source

val set_receipt_rule_position : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.SetReceiptRulePositionRequest.t ->
  (Awso_ses.Values.SetReceiptRulePositionResponse.t,
    Awso_ses.Values.SetReceiptRulePositionResponse.error)
    Result.t
    Async.Deferred.t

Source

val test_render_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.TestRenderTemplateRequest.t ->
  (Awso_ses.Values.TestRenderTemplateResponse.t,
    Awso_ses.Values.TestRenderTemplateResponse.error)
    Result.t
    Async.Deferred.t

Source

val update_account_sending_enabled : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateAccountSendingEnabledRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val update_configuration_set_event_destination : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateConfigurationSetEventDestinationRequest.t ->
  (Awso_ses.Values.UpdateConfigurationSetEventDestinationResponse.t,
    Awso_ses.Values.UpdateConfigurationSetEventDestinationResponse.error)
    Result.t
    Async.Deferred.t

Source

val update_configuration_set_reputation_metrics_enabled : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateConfigurationSetReputationMetricsEnabledRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val update_configuration_set_sending_enabled : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateConfigurationSetSendingEnabledRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val update_configuration_set_tracking_options : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateConfigurationSetTrackingOptionsRequest.t ->
  (Awso_ses.Values.UpdateConfigurationSetTrackingOptionsResponse.t,
    Awso_ses.Values.UpdateConfigurationSetTrackingOptionsResponse.error)
    Result.t
    Async.Deferred.t

Source

val update_custom_verification_email_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateCustomVerificationEmailTemplateRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val update_receipt_rule : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateReceiptRuleRequest.t ->
  (Awso_ses.Values.UpdateReceiptRuleResponse.t,
    Awso_ses.Values.UpdateReceiptRuleResponse.error)
    Result.t
    Async.Deferred.t

Source

val update_template : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.UpdateTemplateRequest.t ->
  (Awso_ses.Values.UpdateTemplateResponse.t,
    Awso_ses.Values.UpdateTemplateResponse.error)
    Result.t
    Async.Deferred.t

Source

val verify_domain_dkim : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.VerifyDomainDkimRequest.t ->
  (Awso_ses.Values.VerifyDomainDkimResponse.t,
    Awso_ses.Values.VerifyDomainDkimResponse.error)
    Result.t
    Async.Deferred.t

Source

val verify_domain_identity : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.VerifyDomainIdentityRequest.t ->
  (Awso_ses.Values.VerifyDomainIdentityResponse.t,
    Awso_ses.Values.VerifyDomainIdentityResponse.error)
    Result.t
    Async.Deferred.t

Source

val verify_email_address : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.VerifyEmailAddressRequest.t ->
  (unit, unit) Result.t Async.Deferred.t

Source

val verify_email_identity : 
  ?endpoint_url:string ->
  ?cfg:Awso.Cfg.t ->
  Awso_ses.Values.VerifyEmailIdentityRequest.t ->
  (Awso_ses.Values.VerifyEmailIdentityResponse.t,
    Awso_ses.Values.VerifyEmailIdentityResponse.error)
    Result.t
    Async.Deferred.t

include module type of struct include Awso_ses.Values end

Sourceval service : Awso.Service.t

Sourceval apiVersion : string

Sourceval endpointPrefix : string

Sourceval serviceFullName : string

Sourceval signatureVersion : string

Sourceval protocol : string

Sourceval globalEndpoint : string

Sourceval serviceAbbreviation : string

Sourceval xmlNamespace : string

Sourceval simple_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t

Sourceval composed_to_json : ('a -> Awso__Botodata.value) -> 'a -> Yojson.Safe.t

Sourceval to_query : ('a -> Awso.Client.Query.value) -> 'a -> Awso.Client.Query.t

Source

val structure_to_value_aux : 
  ('a * 'b option) list ->
  f:(('a * 'b) list -> 'c) ->
  [> `Structure of 'c ]

Source

val structure_to_value : 
  ('a * 'b option) list ->
  [> `Structure of ('a * 'b) list ]

Source

val structure_to_wrapped_value : 
  wrapper:'a ->
  response:'a ->
  ('b * 'c option) list ->
  [> `Structure of ('a * [> `Structure of ('b * 'c) list ]) list ]

Sourcemodule ExtensionFieldName = Awso_ses.Values.ExtensionFieldName

Sourcemodule ExtensionFieldValue = Awso_ses.Values.ExtensionFieldValue

Sourcemodule HeaderName = Awso_ses.Values.HeaderName

Sourcemodule HeaderValue = Awso_ses.Values.HeaderValue

Sourcemodule Address = Awso_ses.Values.Address

Sourcemodule AmazonResourceName = Awso_ses.Values.AmazonResourceName

Sourcemodule BounceMessage = Awso_ses.Values.BounceMessage

Sourcemodule BounceSmtpReplyCode = Awso_ses.Values.BounceSmtpReplyCode

Sourcemodule BounceStatusCode = Awso_ses.Values.BounceStatusCode

Sourcemodule ConnectInstanceArn = Awso_ses.Values.ConnectInstanceArn

Sourcemodule IAMRoleARN = Awso_ses.Values.IAMRoleARN

Sourcemodule InvocationType = Awso_ses.Values.InvocationType

Sourcemodule S3BucketName = Awso_ses.Values.S3BucketName

Sourcemodule S3KeyPrefix = Awso_ses.Values.S3KeyPrefix

Sourcemodule SNSActionEncoding = Awso_ses.Values.SNSActionEncoding

Sourcemodule StopScope = Awso_ses.Values.StopScope

Sourcemodule DefaultDimensionValue = Awso_ses.Values.DefaultDimensionValue

Sourcemodule DimensionName = Awso_ses.Values.DimensionName

Sourcemodule DimensionValueSource = Awso_ses.Values.DimensionValueSource

Sourcemodule MessageTagName = Awso_ses.Values.MessageTagName

Sourcemodule MessageTagValue = Awso_ses.Values.MessageTagValue

Sourcemodule ExtensionField = Awso_ses.Values.ExtensionField

Additional X-headers to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Sourcemodule AddHeaderAction = Awso_ses.Values.AddHeaderAction

When included in a receipt rule, this action adds a header to the received email. For information about adding a header using a receipt rule, see the Amazon SES Developer Guide.

Sourcemodule BounceAction = Awso_ses.Values.BounceAction

When included in a receipt rule, this action rejects the received email by returning a bounce response to the sender and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). For information about sending a bounce message in response to a received email, see the Amazon SES Developer Guide.

Sourcemodule ConnectAction = Awso_ses.Values.ConnectAction

When included in a receipt rule, this action parses the received message and starts an email contact in Amazon Connect on your behalf. When you receive emails, the maximum email size (including headers) is 40 MB. Additionally, emails may only have up to 10 attachments. Emails larger than 40 MB or with more than 10 attachments will be bounced. We recommend that you configure this action via Amazon Connect.

Sourcemodule LambdaAction = Awso_ses.Values.LambdaAction

When included in a receipt rule, this action calls an Amazon Web Services Lambda function and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). To enable Amazon SES to call your Amazon Web Services Lambda function or to publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about giving permissions, see the Amazon SES Developer Guide. For information about using Amazon Web Services Lambda actions in receipt rules, see the Amazon SES Developer Guide.

Sourcemodule S3Action = Awso_ses.Values.S3Action

When included in a receipt rule, this action saves the received message to an Amazon Simple Storage Service (Amazon S3) bucket and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). To enable Amazon SES to write emails to your Amazon S3 bucket, use an Amazon Web Services KMS key to encrypt your emails, or publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about granting permissions, see the Amazon SES Developer Guide. When you save your emails to an Amazon S3 bucket, the maximum email size (including headers) is 40 MB. Emails larger than that bounces. For information about specifying Amazon S3 actions in receipt rules, see the Amazon SES Developer Guide.

Sourcemodule SNSAction = Awso_ses.Values.SNSAction

When included in a receipt rule, this action publishes a notification to Amazon Simple Notification Service (Amazon SNS). This action includes a complete copy of the email content in the Amazon SNS notifications. Amazon SNS notifications for all other actions simply provide information about the email. They do not include the email content itself. If you own the Amazon SNS topic, you don't need to do anything to give Amazon SES permission to publish emails to it. However, if you don't own the Amazon SNS topic, you need to attach a policy to the topic to give Amazon SES permissions to access it. For information about giving permissions, see the Amazon SES Developer Guide. You can only publish emails that are 150 KB or less (including the header) to Amazon SNS. Larger emails bounce. If you anticipate emails larger than 150 KB, use the S3 action instead. For information about using a receipt rule to publish an Amazon SNS notification, see the Amazon SES Developer Guide.

Sourcemodule StopAction = Awso_ses.Values.StopAction

When included in a receipt rule, this action terminates the evaluation of the receipt rule set and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). For information about setting a stop action in a receipt rule, see the Amazon SES Developer Guide.

Sourcemodule WorkmailAction = Awso_ses.Values.WorkmailAction

When included in a receipt rule, this action calls Amazon WorkMail and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). It usually isn't necessary to set this up manually, because Amazon WorkMail adds the rule automatically during its setup procedure. For information using a receipt rule to call Amazon WorkMail, see the Amazon SES Developer Guide.

Source

module CloudWatchDimensionConfiguration =
  Awso_ses.Values.CloudWatchDimensionConfiguration

Contains the dimension configuration to use when you publish email sending events to Amazon CloudWatch. For information about publishing email sending events to Amazon CloudWatch, see the Amazon SES Developer Guide.

Sourcemodule Charset = Awso_ses.Values.Charset

Sourcemodule MessageData = Awso_ses.Values.MessageData

Sourcemodule AddressList = Awso_ses.Values.AddressList

Sourcemodule MessageTag = Awso_ses.Values.MessageTag

Contains the name and value of a tag that you can provide to SendEmail or SendRawEmail to apply to an email. Message tags, which you use with configuration sets, enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Sourcemodule DiagnosticCode = Awso_ses.Values.DiagnosticCode

Sourcemodule DsnAction = Awso_ses.Values.DsnAction

Sourcemodule DsnStatus = Awso_ses.Values.DsnStatus

Sourcemodule ExtensionFieldList = Awso_ses.Values.ExtensionFieldList

Sourcemodule LastAttemptDate = Awso_ses.Values.LastAttemptDate

Sourcemodule RemoteMta = Awso_ses.Values.RemoteMta

Sourcemodule Cidr = Awso_ses.Values.Cidr

Sourcemodule ReceiptFilterPolicy = Awso_ses.Values.ReceiptFilterPolicy

Sourcemodule VerificationToken = Awso_ses.Values.VerificationToken

Sourcemodule ReceiptAction = Awso_ses.Values.ReceiptAction

An action that Amazon SES can take when it receives an email on behalf of one or more email addresses or domains that you own. An instance of this data type can represent only one action. For information about setting up receipt rules, see the Amazon SES Developer Guide.

Sourcemodule Recipient = Awso_ses.Values.Recipient

Source

module CloudWatchDimensionConfigurations =
  Awso_ses.Values.CloudWatchDimensionConfigurations

Sourcemodule EventType = Awso_ses.Values.EventType

Sourcemodule Content = Awso_ses.Values.Content

Represents textual data, plus an optional character set specification. By default, the text must be 7-bit ASCII, due to the constraints of the SMTP protocol. If the text must contain any other characters, then you must also specify a character set. Examples include UTF-8, ISO-8859-1, and Shift_JIS.

Sourcemodule BulkEmailStatus = Awso_ses.Values.BulkEmailStatus

Sourcemodule Error = Awso_ses.Values.Error

Sourcemodule MessageId = Awso_ses.Values.MessageId

Sourcemodule Destination = Awso_ses.Values.Destination

Represents the destination of the message, consisting of To:, CC:, and BCC: fields. Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the email address string must be 7-bit ASCII. If you want to send to or from email addresses that contain Unicode characters in the domain part of an address, you must encode the domain using Punycode. Punycode is not permitted in the local part of the email address (the part before the @ sign) nor in the "friendly from" name. If you want to use Unicode characters in the "friendly from" name, you must encode the "friendly from" name using MIME encoded-word syntax, as described in Sending raw email using the Amazon SES API. For more information about Punycode, see RFC 3492.

Sourcemodule MessageTagList = Awso_ses.Values.MessageTagList

Sourcemodule TemplateData = Awso_ses.Values.TemplateData

Sourcemodule BounceType = Awso_ses.Values.BounceType

Sourcemodule RecipientDsnFields = Awso_ses.Values.RecipientDsnFields

Recipient-related information to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Sourcemodule TemplateName = Awso_ses.Values.TemplateName

Sourcemodule Timestamp = Awso_ses.Values.Timestamp

Sourcemodule ReceiptRuleSetName = Awso_ses.Values.ReceiptRuleSetName

Sourcemodule ReceiptFilterName = Awso_ses.Values.ReceiptFilterName

Sourcemodule ReceiptIpFilter = Awso_ses.Values.ReceiptIpFilter

A receipt IP address filter enables you to specify whether to accept or reject mail originating from an IP address or range of IP addresses. For information about setting up IP address filters, see the Amazon SES Developer Guide.

Sourcemodule FailureRedirectionURL = Awso_ses.Values.FailureRedirectionURL

Sourcemodule FromAddress = Awso_ses.Values.FromAddress

Sourcemodule Subject = Awso_ses.Values.Subject

Sourcemodule SuccessRedirectionURL = Awso_ses.Values.SuccessRedirectionURL

Sourcemodule ConfigurationSetName = Awso_ses.Values.ConfigurationSetName

Sourcemodule Counter = Awso_ses.Values.Counter

Sourcemodule VerificationStatus = Awso_ses.Values.VerificationStatus

Sourcemodule Enabled = Awso_ses.Values.Enabled

Sourcemodule NotificationTopic = Awso_ses.Values.NotificationTopic

Sourcemodule BehaviorOnMXFailure = Awso_ses.Values.BehaviorOnMXFailure

Sourcemodule CustomMailFromStatus = Awso_ses.Values.CustomMailFromStatus

Sourcemodule MailFromDomainName = Awso_ses.Values.MailFromDomainName

Sourcemodule VerificationTokenList = Awso_ses.Values.VerificationTokenList

Sourcemodule ReceiptActionsList = Awso_ses.Values.ReceiptActionsList

Sourcemodule ReceiptRuleName = Awso_ses.Values.ReceiptRuleName

Sourcemodule RecipientsList = Awso_ses.Values.RecipientsList

Sourcemodule TlsPolicy = Awso_ses.Values.TlsPolicy

Sourcemodule CloudWatchDestination = Awso_ses.Values.CloudWatchDestination

Contains information associated with an Amazon CloudWatch event destination to which email sending events are published. Event destinations, such as Amazon CloudWatch, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Sourcemodule EventDestinationName = Awso_ses.Values.EventDestinationName

Sourcemodule EventTypes = Awso_ses.Values.EventTypes

Sourcemodule KinesisFirehoseDestination = Awso_ses.Values.KinesisFirehoseDestination

Contains the delivery stream ARN and the IAM role ARN associated with an Amazon Kinesis Firehose event destination. Event destinations, such as Amazon Kinesis Firehose, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Sourcemodule SNSDestination = Awso_ses.Values.SNSDestination

Contains the topic ARN associated with an Amazon Simple Notification Service (Amazon SNS) event destination. Event destinations, such as Amazon SNS, are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Sourcemodule HtmlPart = Awso_ses.Values.HtmlPart

Sourcemodule SubjectPart = Awso_ses.Values.SubjectPart

Sourcemodule TextPart = Awso_ses.Values.TextPart

Sourcemodule RuleOrRuleSetName = Awso_ses.Values.RuleOrRuleSetName

Sourcemodule CustomRedirectDomain = Awso_ses.Values.CustomRedirectDomain

Sourcemodule RawMessageData = Awso_ses.Values.RawMessageData

Sourcemodule Body = Awso_ses.Values.Body

Represents the body of the message. You can specify text, HTML, or both. If you use both, then the message should display correctly in the widest variety of email clients.

Sourcemodule BulkEmailDestinationStatus = Awso_ses.Values.BulkEmailDestinationStatus

An object that contains the response from the SendBulkTemplatedEmail operation.

Sourcemodule BulkEmailDestination = Awso_ses.Values.BulkEmailDestination

An array that contains one or more Destinations, as well as the tags and replacement data associated with each of those Destinations.

Sourcemodule BouncedRecipientInfo = Awso_ses.Values.BouncedRecipientInfo

Sourcemodule ArrivalDate = Awso_ses.Values.ArrivalDate

Sourcemodule ReportingMta = Awso_ses.Values.ReportingMta

Sourcemodule TemplateMetadata = Awso_ses.Values.TemplateMetadata

Contains information about an email template.

Sourcemodule ReceiptRuleSetMetadata = Awso_ses.Values.ReceiptRuleSetMetadata

Information about a receipt rule set. A receipt rule set is a collection of rules that specify what Amazon SES should do with mail it receives on behalf of your account's verified domains. For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

Sourcemodule ReceiptFilter = Awso_ses.Values.ReceiptFilter

Sourcemodule PolicyName = Awso_ses.Values.PolicyName

Sourcemodule Identity = Awso_ses.Values.Identity

Source

module CustomVerificationEmailTemplate =
  Awso_ses.Values.CustomVerificationEmailTemplate

Contains information about a custom verification email template.

Sourcemodule ConfigurationSet = Awso_ses.Values.ConfigurationSet

The name of the configuration set. Configuration sets let you create groups of rules that you can apply to the emails you send using Amazon SES. For more information about using configuration sets, see Using Amazon SES Configuration Sets in the Amazon SES Developer Guide.

Sourcemodule SendDataPoint = Awso_ses.Values.SendDataPoint

Represents sending statistics data. Each SendDataPoint contains statistics for a 15-minute period of sending activity.

Source

module IdentityVerificationAttributes =
  Awso_ses.Values.IdentityVerificationAttributes

Represents the verification attributes of a single identity.

Sourcemodule Policy = Awso_ses.Values.Policy

Source

module IdentityNotificationAttributes =
  Awso_ses.Values.IdentityNotificationAttributes

Represents the notification attributes of an identity, including whether an identity has Amazon Simple Notification Service (Amazon SNS) topics set for bounce, complaint, and/or delivery notifications, and whether feedback forwarding is enabled for bounce and complaint notifications.

Source

module IdentityMailFromDomainAttributes =
  Awso_ses.Values.IdentityMailFromDomainAttributes

Represents the custom MAIL FROM domain attributes of a verified identity (email address or domain).

Sourcemodule IdentityDkimAttributes = Awso_ses.Values.IdentityDkimAttributes

Represents the DKIM attributes of a verified email address or a domain.

Sourcemodule ReceiptRule = Awso_ses.Values.ReceiptRule

Receipt rules enable you to specify which actions Amazon SES should take when it receives mail on behalf of one or more email addresses or domains that you own. Each receipt rule defines a set of email addresses or domains that it applies to. If the email addresses or domains match at least one recipient address of the message, Amazon SES executes all of the receipt rule's actions on the message. For information about setting up receipt rules, see the Amazon SES Developer Guide.

Sourcemodule EventDestination = Awso_ses.Values.EventDestination

Contains information about an event destination. When you create or update an event destination, you must provide one, and only one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose or Amazon Simple Notification Service (Amazon SNS). Event destinations are associated with configuration sets, which enable you to publish email sending events to Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about using configuration sets, see the Amazon SES Developer Guide.

Sourcemodule LastFreshStart = Awso_ses.Values.LastFreshStart

Sourcemodule ConfigurationSetAttribute = Awso_ses.Values.ConfigurationSetAttribute

Sourcemodule Domain = Awso_ses.Values.Domain

Sourcemodule InvalidTemplateException = Awso_ses.Values.InvalidTemplateException

Indicates that the template that you specified could not be rendered. This issue may occur when a template refers to a partial that does not exist.

Source

module TemplateDoesNotExistException =
  Awso_ses.Values.TemplateDoesNotExistException

Indicates that the Template object you specified does not exist in your Amazon SES account.

Sourcemodule Template = Awso_ses.Values.Template

The content of the email, composed of a subject line and either an HTML part or a text-only part.

Source

module InvalidLambdaFunctionException =
  Awso_ses.Values.InvalidLambdaFunctionException

Indicates that the provided Amazon Web Services Lambda function is invalid, or that Amazon SES could not execute the provided function, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide.

Source

module InvalidS3ConfigurationException =
  Awso_ses.Values.InvalidS3ConfigurationException

Indicates that the provided Amazon S3 bucket or Amazon Web Services KMS encryption key is invalid, or that Amazon SES could not publish to the bucket, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide.

Sourcemodule InvalidSnsTopicException = Awso_ses.Values.InvalidSnsTopicException

Indicates that the provided Amazon SNS topic is invalid, or that Amazon SES could not publish to the topic, possibly due to permissions issues. For information about giving permissions, see the Amazon SES Developer Guide.

Sourcemodule LimitExceededException = Awso_ses.Values.LimitExceededException

Indicates that a resource could not be created because of service limits. For a list of Amazon SES limits, see the Amazon SES Developer Guide.

Sourcemodule RuleDoesNotExistException = Awso_ses.Values.RuleDoesNotExistException

Indicates that the provided receipt rule does not exist.

Source

module RuleSetDoesNotExistException =
  Awso_ses.Values.RuleSetDoesNotExistException

Indicates that the provided receipt rule set does not exist.

Sourcemodule TemplateContent = Awso_ses.Values.TemplateContent

Source

module ConfigurationSetDoesNotExistException =
  Awso_ses.Values.ConfigurationSetDoesNotExistException

Indicates that the configuration set does not exist.

Source

module InvalidTrackingOptionsException =
  Awso_ses.Values.InvalidTrackingOptionsException

Indicates that the custom domain to be used for open and click tracking redirects is invalid. This error appears most often in the following situations: When the tracking domain you specified is not verified in Amazon SES. When the tracking domain you specified is not a valid domain or subdomain.

Source

module TrackingOptionsDoesNotExistException =
  Awso_ses.Values.TrackingOptionsDoesNotExistException

Indicates that the TrackingOptions object you specified does not exist.

Sourcemodule TrackingOptions = Awso_ses.Values.TrackingOptions

A domain that is used to redirect email recipients to an Amazon SES-operated domain. This domain captures open and click events generated by Amazon SES emails. For more information, see Configuring Custom Domains to Handle Open and Click Tracking in the Amazon SES Developer Guide.

Source

module EventDestinationDoesNotExistException =
  Awso_ses.Values.EventDestinationDoesNotExistException

Indicates that the event destination does not exist.

Source

module InvalidCloudWatchDestinationException =
  Awso_ses.Values.InvalidCloudWatchDestinationException

Indicates that the Amazon CloudWatch destination is invalid. See the error message for details.

Source

module InvalidFirehoseDestinationException =
  Awso_ses.Values.InvalidFirehoseDestinationException

Indicates that the Amazon Kinesis Firehose destination is invalid. See the error message for details.

Source

module InvalidSNSDestinationException =
  Awso_ses.Values.InvalidSNSDestinationException

Indicates that the Amazon Simple Notification Service (Amazon SNS) destination is invalid. See the error message for details.

Source

module InvalidRenderingParameterException =
  Awso_ses.Values.InvalidRenderingParameterException

Indicates that one or more of the replacement values you provided is invalid. This error may occur when the TemplateData object contains invalid JSON.

Source

module MissingRenderingAttributeException =
  Awso_ses.Values.MissingRenderingAttributeException

Indicates that one or more of the replacement values for the specified template was not specified. Ensure that the TemplateData object contains references to all of the replacement tags in the specified template.

Sourcemodule RenderedTemplate = Awso_ses.Values.RenderedTemplate

Sourcemodule NotificationType = Awso_ses.Values.NotificationType

Source

module AccountSendingPausedException =
  Awso_ses.Values.AccountSendingPausedException

Indicates that email sending is disabled for your entire Amazon SES account. You can enable or disable email sending for your Amazon SES account using UpdateAccountSendingEnabled.

Source

module ConfigurationSetSendingPausedException =
  Awso_ses.Values.ConfigurationSetSendingPausedException

Indicates that email sending is disabled for the configuration set. You can enable or disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled.

Source

module MailFromDomainNotVerifiedException =
  Awso_ses.Values.MailFromDomainNotVerifiedException

Indicates that the message could not be sent because Amazon SES could not read the MX record required to use the specified MAIL FROM domain. For information about editing the custom MAIL FROM domain settings for an identity, see the Amazon SES Developer Guide.

Sourcemodule MessageRejected = Awso_ses.Values.MessageRejected

Indicates that the action failed, and the message could not be sent. Check the error stack for more information about what caused the error.

Sourcemodule RawMessage = Awso_ses.Values.RawMessage

Represents the raw data of the message.

Sourcemodule Message = Awso_ses.Values.Message

Represents the message to be sent, composed of a subject and a body.

Source

module CustomVerificationEmailTemplateDoesNotExistException =
  Awso_ses.Values.CustomVerificationEmailTemplateDoesNotExistException

Indicates that a custom verification email template with the name you specified does not exist.

Source

module FromEmailAddressNotVerifiedException =
  Awso_ses.Values.FromEmailAddressNotVerifiedException

Indicates that the sender address specified for a custom verification email is not verified, and is therefore not eligible to send the custom verification email.

Source

module ProductionAccessNotGrantedException =
  Awso_ses.Values.ProductionAccessNotGrantedException

Indicates that the account has not been granted production access.

Source

module BulkEmailDestinationStatusList =
  Awso_ses.Values.BulkEmailDestinationStatusList

Sourcemodule BulkEmailDestinationList = Awso_ses.Values.BulkEmailDestinationList

Sourcemodule BouncedRecipientInfoList = Awso_ses.Values.BouncedRecipientInfoList

Sourcemodule Explanation = Awso_ses.Values.Explanation

Sourcemodule MessageDsn = Awso_ses.Values.MessageDsn

Message-related information to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces. For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Sourcemodule ReceiptRuleNamesList = Awso_ses.Values.ReceiptRuleNamesList

Sourcemodule InvalidPolicyException = Awso_ses.Values.InvalidPolicyException

Indicates that the provided policy is invalid. Check the error stack for more information about what caused the error.

Source

module InvalidDeliveryOptionsException =
  Awso_ses.Values.InvalidDeliveryOptionsException

Indicates that provided delivery option is invalid.

Sourcemodule DeliveryOptions = Awso_ses.Values.DeliveryOptions

Specifies whether messages that use the configuration set are required to use Transport Layer Security (TLS).

Sourcemodule NextToken = Awso_ses.Values.NextToken

Sourcemodule TemplateMetadataList = Awso_ses.Values.TemplateMetadataList

Sourcemodule MaxItems = Awso_ses.Values.MaxItems

Sourcemodule ReceiptRuleSetsLists = Awso_ses.Values.ReceiptRuleSetsLists

Sourcemodule ReceiptFilterList = Awso_ses.Values.ReceiptFilterList

Sourcemodule PolicyNameList = Awso_ses.Values.PolicyNameList

Sourcemodule IdentityList = Awso_ses.Values.IdentityList

Sourcemodule IdentityType = Awso_ses.Values.IdentityType

Source

module CustomVerificationEmailTemplates =
  Awso_ses.Values.CustomVerificationEmailTemplates

Sourcemodule MaxResults = Awso_ses.Values.MaxResults

Sourcemodule ConfigurationSets = Awso_ses.Values.ConfigurationSets

Sourcemodule SendDataPointList = Awso_ses.Values.SendDataPointList

Sourcemodule Max24HourSend = Awso_ses.Values.Max24HourSend

Sourcemodule MaxSendRate = Awso_ses.Values.MaxSendRate

Sourcemodule SentLast24Hours = Awso_ses.Values.SentLast24Hours

Sourcemodule VerificationAttributes = Awso_ses.Values.VerificationAttributes

Sourcemodule PolicyMap = Awso_ses.Values.PolicyMap

Sourcemodule NotificationAttributes = Awso_ses.Values.NotificationAttributes

Sourcemodule MailFromDomainAttributes = Awso_ses.Values.MailFromDomainAttributes

Sourcemodule DkimAttributes = Awso_ses.Values.DkimAttributes

Sourcemodule ReceiptRulesList = Awso_ses.Values.ReceiptRulesList

Sourcemodule EventDestinations = Awso_ses.Values.EventDestinations

Sourcemodule ReputationOptions = Awso_ses.Values.ReputationOptions

Contains information about the reputation settings for a configuration set.

Source

module ConfigurationSetAttributeList =
  Awso_ses.Values.ConfigurationSetAttributeList

Sourcemodule CannotDeleteException = Awso_ses.Values.CannotDeleteException

Indicates that the delete operation could not be completed.

Sourcemodule AlreadyExistsException = Awso_ses.Values.AlreadyExistsException

Indicates that a resource could not be created because of a naming conflict.

Source

module TrackingOptionsAlreadyExistsException =
  Awso_ses.Values.TrackingOptionsAlreadyExistsException

Indicates that the configuration set you specified already contains a TrackingOptions object.

Source

module ConfigurationSetAlreadyExistsException =
  Awso_ses.Values.ConfigurationSetAlreadyExistsException

Indicates that the configuration set could not be created because of a naming conflict.

Source

module InvalidConfigurationSetException =
  Awso_ses.Values.InvalidConfigurationSetException

Indicates that the configuration set is invalid. See the error message for details.

Source

module EventDestinationAlreadyExistsException =
  Awso_ses.Values.EventDestinationAlreadyExistsException

Indicates that the event destination could not be created because of a naming conflict.

Source

module VerifyEmailIdentityResponse =
  Awso_ses.Values.VerifyEmailIdentityResponse

An empty element returned on a successful request.

Sourcemodule VerifyEmailIdentityRequest = Awso_ses.Values.VerifyEmailIdentityRequest

Represents a request to begin email address verification with Amazon SES. For information about email address verification, see the Amazon SES Developer Guide.

Sourcemodule VerifyEmailAddressRequest = Awso_ses.Values.VerifyEmailAddressRequest

Represents a request to begin email address verification with Amazon SES. For information about email address verification, see the Amazon SES Developer Guide.

Source

module VerifyDomainIdentityResponse =
  Awso_ses.Values.VerifyDomainIdentityResponse

Returns a TXT record that you must publish to the DNS server of your domain to complete domain verification with Amazon SES.

Source

module VerifyDomainIdentityRequest =
  Awso_ses.Values.VerifyDomainIdentityRequest

Represents a request to begin Amazon SES domain verification and to generate the TXT records that you must publish to the DNS server of your domain to complete the verification. For information about domain verification, see the Amazon SES Developer Guide.

Sourcemodule VerifyDomainDkimResponse = Awso_ses.Values.VerifyDomainDkimResponse

Returns CNAME records that you must publish to the DNS server of your domain to set up Easy DKIM with Amazon SES.

Sourcemodule VerifyDomainDkimRequest = Awso_ses.Values.VerifyDomainDkimRequest

Represents a request to generate the CNAME records needed to set up Easy DKIM with Amazon SES. For more information about setting up Easy DKIM, see the Amazon SES Developer Guide.

Sourcemodule UpdateTemplateResponse = Awso_ses.Values.UpdateTemplateResponse

Updates an email template. Email templates enable you to send personalized email to one or more destinations in a single operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Sourcemodule UpdateTemplateRequest = Awso_ses.Values.UpdateTemplateRequest

Sourcemodule UpdateReceiptRuleResponse = Awso_ses.Values.UpdateReceiptRuleResponse

An empty element returned on a successful request.

Sourcemodule UpdateReceiptRuleRequest = Awso_ses.Values.UpdateReceiptRuleRequest

Represents a request to update a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module UpdateCustomVerificationEmailTemplateRequest =
  Awso_ses.Values.UpdateCustomVerificationEmailTemplateRequest

Represents a request to update an existing custom verification email template.

Source

module UpdateConfigurationSetTrackingOptionsResponse =
  Awso_ses.Values.UpdateConfigurationSetTrackingOptionsResponse

An empty element returned on a successful request.

Source

module UpdateConfigurationSetTrackingOptionsRequest =
  Awso_ses.Values.UpdateConfigurationSetTrackingOptionsRequest

Represents a request to update the tracking options for a configuration set.

Source

module UpdateConfigurationSetSendingEnabledRequest =
  Awso_ses.Values.UpdateConfigurationSetSendingEnabledRequest

Represents a request to enable or disable the email sending capabilities for a specific configuration set.

Source

module UpdateConfigurationSetReputationMetricsEnabledRequest =
  Awso_ses.Values.UpdateConfigurationSetReputationMetricsEnabledRequest

Represents a request to modify the reputation metric publishing settings for a configuration set.

Source

module UpdateConfigurationSetEventDestinationResponse =
  Awso_ses.Values.UpdateConfigurationSetEventDestinationResponse

An empty element returned on a successful request.

Source

module UpdateConfigurationSetEventDestinationRequest =
  Awso_ses.Values.UpdateConfigurationSetEventDestinationRequest

Represents a request to update the event destination of a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module UpdateAccountSendingEnabledRequest =
  Awso_ses.Values.UpdateAccountSendingEnabledRequest

Represents a request to enable or disable the email sending capabilities for your entire Amazon SES account.

Sourcemodule TestRenderTemplateResponse = Awso_ses.Values.TestRenderTemplateResponse

Creates a preview of the MIME content of an email when provided with a template and a set of replacement data. You can execute this operation no more than once per second.

Sourcemodule TestRenderTemplateRequest = Awso_ses.Values.TestRenderTemplateRequest

Creates a preview of the MIME content of an email when provided with a template and a set of replacement data. You can execute this operation no more than once per second.

Source

module SetReceiptRulePositionResponse =
  Awso_ses.Values.SetReceiptRulePositionResponse

An empty element returned on a successful request.

Source

module SetReceiptRulePositionRequest =
  Awso_ses.Values.SetReceiptRulePositionRequest

Represents a request to set the position of a receipt rule in a receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module SetIdentityNotificationTopicResponse =
  Awso_ses.Values.SetIdentityNotificationTopicResponse

An empty element returned on a successful request.

Source

module SetIdentityNotificationTopicRequest =
  Awso_ses.Values.SetIdentityNotificationTopicRequest

Represents a request to specify the Amazon SNS topic to which Amazon SES publishes bounce, complaint, or delivery notifications for emails sent with that identity as the source. For information about Amazon SES notifications, see the Amazon SES Developer Guide.

Source

module SetIdentityMailFromDomainResponse =
  Awso_ses.Values.SetIdentityMailFromDomainResponse

An empty element returned on a successful request.

Source

module SetIdentityMailFromDomainRequest =
  Awso_ses.Values.SetIdentityMailFromDomainRequest

Represents a request to enable or disable the Amazon SES custom MAIL FROM domain setup for a verified identity. For information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.

Source

module SetIdentityHeadersInNotificationsEnabledResponse =
  Awso_ses.Values.SetIdentityHeadersInNotificationsEnabledResponse

An empty element returned on a successful request.

Source

module SetIdentityHeadersInNotificationsEnabledRequest =
  Awso_ses.Values.SetIdentityHeadersInNotificationsEnabledRequest

Represents a request to set whether Amazon SES includes the original email headers in the Amazon SNS notifications of a specified type. For information about notifications, see the Amazon SES Developer Guide.

Source

module SetIdentityFeedbackForwardingEnabledResponse =
  Awso_ses.Values.SetIdentityFeedbackForwardingEnabledResponse

An empty element returned on a successful request.

Source

module SetIdentityFeedbackForwardingEnabledRequest =
  Awso_ses.Values.SetIdentityFeedbackForwardingEnabledRequest

Represents a request to enable or disable whether Amazon SES forwards you bounce and complaint notifications through email. For information about email feedback forwarding, see the Amazon SES Developer Guide.

Source

module SetIdentityDkimEnabledResponse =
  Awso_ses.Values.SetIdentityDkimEnabledResponse

An empty element returned on a successful request.

Source

module SetIdentityDkimEnabledRequest =
  Awso_ses.Values.SetIdentityDkimEnabledRequest

Represents a request to enable or disable Amazon SES Easy DKIM signing for an identity. For more information about setting up Easy DKIM, see the Amazon SES Developer Guide.

Source

module SetActiveReceiptRuleSetResponse =
  Awso_ses.Values.SetActiveReceiptRuleSetResponse

An empty element returned on a successful request.

Source

module SetActiveReceiptRuleSetRequest =
  Awso_ses.Values.SetActiveReceiptRuleSetRequest

Represents a request to set a receipt rule set as the active receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule SendTemplatedEmailResponse = Awso_ses.Values.SendTemplatedEmailResponse

Composes an email message using an email template and immediately queues it for sending. To send email using this operation, your call must meet the following requirements: The call must refer to an existing email template. You can create email templates using the CreateTemplate operation. The message must be sent from a verified email address or domain. If your account is still in the Amazon SES sandbox, you may only send to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide. The maximum message size is 10 MB. Calls to the SendTemplatedEmail operation may only include one Destination parameter. A destination is a set of recipients that receives the same version of the email. The Destination parameter can include up to 50 recipients, across the To:, CC: and BCC: fields. The Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid. If your call to the SendTemplatedEmail operation includes all of the required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES can't render the email because the template contains errors, it doesn't send the email. Additionally, because it already accepted the message, Amazon SES doesn't return a message stating that it was unable to send the email. For these reasons, we highly recommend that you set up Amazon SES to send you notifications when Rendering Failure events occur. For more information, see Sending Personalized Email Using the Amazon SES API in the Amazon Simple Email Service Developer Guide.

Sourcemodule SendTemplatedEmailRequest = Awso_ses.Values.SendTemplatedEmailRequest

Represents a request to send a templated email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule SendRawEmailResponse = Awso_ses.Values.SendRawEmailResponse

Represents a unique message ID.

Sourcemodule SendRawEmailRequest = Awso_ses.Values.SendRawEmailRequest

Represents a request to send a single raw email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule SendEmailResponse = Awso_ses.Values.SendEmailResponse

Represents a unique message ID.

Sourcemodule SendEmailRequest = Awso_ses.Values.SendEmailRequest

Represents a request to send a single formatted email using Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module SendCustomVerificationEmailResponse =
  Awso_ses.Values.SendCustomVerificationEmailResponse

The response received when attempting to send the custom verification email.

Source

module SendCustomVerificationEmailRequest =
  Awso_ses.Values.SendCustomVerificationEmailRequest

Represents a request to send a custom verification email to a specified recipient.

Source

module SendBulkTemplatedEmailResponse =
  Awso_ses.Values.SendBulkTemplatedEmailResponse

Composes an email message to multiple destinations. The message body is created using an email template. To send email using this operation, your call must meet the following requirements: The call must refer to an existing email template. You can create email templates using CreateTemplate. The message must be sent from a verified email address or domain. If your account is still in the Amazon SES sandbox, you may send only to verified addresses or domains, or to email addresses associated with the Amazon SES Mailbox Simulator. For more information, see Verifying Email Addresses and Domains in the Amazon SES Developer Guide. The maximum message size is 10 MB. Each Destination parameter must include at least one recipient email address. The recipient address can be a To: address, a CC: address, or a BCC: address. If a recipient email address is invalid (that is, it is not in the format UserName@[SubDomain.]Domain.TopLevelDomain), the entire message is rejected, even if the message contains other recipients that are valid. The message may not include more than 50 recipients, across the To:, CC: and BCC: fields. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call the SendBulkTemplatedEmail operation several times to send the message to each group. The number of destinations you can contact in a single call can be limited by your account's maximum sending rate.

Source

module SendBulkTemplatedEmailRequest =
  Awso_ses.Values.SendBulkTemplatedEmailRequest

Represents a request to send a templated email to multiple destinations using Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule SendBounceResponse = Awso_ses.Values.SendBounceResponse

Represents a unique message ID.

Sourcemodule SendBounceRequest = Awso_ses.Values.SendBounceRequest

Represents a request to send a bounce message to the sender of an email you received through Amazon SES.

Source

module ReorderReceiptRuleSetResponse =
  Awso_ses.Values.ReorderReceiptRuleSetResponse

An empty element returned on a successful request.

Source

module ReorderReceiptRuleSetRequest =
  Awso_ses.Values.ReorderReceiptRuleSetRequest

Represents a request to reorder the receipt rules within a receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule PutIdentityPolicyResponse = Awso_ses.Values.PutIdentityPolicyResponse

An empty element returned on a successful request.

Sourcemodule PutIdentityPolicyRequest = Awso_ses.Values.PutIdentityPolicyRequest

Represents a request to add or update a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Source

module PutConfigurationSetDeliveryOptionsResponse =
  Awso_ses.Values.PutConfigurationSetDeliveryOptionsResponse

An HTTP 200 response if the request succeeds, or an error message if the request fails.

Source

module PutConfigurationSetDeliveryOptionsRequest =
  Awso_ses.Values.PutConfigurationSetDeliveryOptionsRequest

A request to modify the delivery options for a configuration set.

Source

module ListVerifiedEmailAddressesResponse =
  Awso_ses.Values.ListVerifiedEmailAddressesResponse

A list of email addresses that you have verified with Amazon SES under your Amazon Web Services account.

Sourcemodule ListTemplatesResponse = Awso_ses.Values.ListTemplatesResponse

Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region. You can execute this operation no more than once per second.

Sourcemodule ListTemplatesRequest = Awso_ses.Values.ListTemplatesRequest

Lists the email templates present in your Amazon SES account in the current Amazon Web Services Region. You can execute this operation no more than once per second.

Source

module ListReceiptRuleSetsResponse =
  Awso_ses.Values.ListReceiptRuleSetsResponse

A list of receipt rule sets that exist under your Amazon Web Services account.

Sourcemodule ListReceiptRuleSetsRequest = Awso_ses.Values.ListReceiptRuleSetsRequest

Represents a request to list the receipt rule sets that exist under your Amazon Web Services account. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule ListReceiptFiltersResponse = Awso_ses.Values.ListReceiptFiltersResponse

A list of IP address filters that exist under your Amazon Web Services account.

Sourcemodule ListReceiptFiltersRequest = Awso_ses.Values.ListReceiptFiltersRequest

Represents a request to list the IP address filters that exist under your Amazon Web Services account. You use IP address filters when you receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module ListIdentityPoliciesResponse =
  Awso_ses.Values.ListIdentityPoliciesResponse

A list of names of sending authorization policies that apply to an identity.

Source

module ListIdentityPoliciesRequest =
  Awso_ses.Values.ListIdentityPoliciesRequest

Represents a request to return a list of sending authorization policies that are attached to an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Sourcemodule ListIdentitiesResponse = Awso_ses.Values.ListIdentitiesResponse

A list of all identities that you have attempted to verify under your Amazon Web Services account, regardless of verification status.

Sourcemodule ListIdentitiesRequest = Awso_ses.Values.ListIdentitiesRequest

Represents a request to return a list of all identities (email addresses and domains) that you have attempted to verify under your Amazon Web Services account, regardless of verification status.

Source

module ListCustomVerificationEmailTemplatesResponse =
  Awso_ses.Values.ListCustomVerificationEmailTemplatesResponse

A paginated list of custom verification email templates.

Source

module ListCustomVerificationEmailTemplatesRequest =
  Awso_ses.Values.ListCustomVerificationEmailTemplatesRequest

Represents a request to list the existing custom verification email templates for your account. For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer Guide.

Source

module ListConfigurationSetsResponse =
  Awso_ses.Values.ListConfigurationSetsResponse

A list of configuration sets associated with your Amazon Web Services account. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module ListConfigurationSetsRequest =
  Awso_ses.Values.ListConfigurationSetsRequest

Represents a request to list the configuration sets associated with your Amazon Web Services account. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Sourcemodule GetTemplateResponse = Awso_ses.Values.GetTemplateResponse

Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify. You can execute this operation no more than once per second.

Sourcemodule GetTemplateRequest = Awso_ses.Values.GetTemplateRequest

Displays the template object (which includes the Subject line, HTML part and text part) for the template you specify. You can execute this operation no more than once per second.

Sourcemodule GetSendStatisticsResponse = Awso_ses.Values.GetSendStatisticsResponse

Represents a list of data points. This list contains aggregated data from the previous two weeks of your sending activity with Amazon SES.

Sourcemodule GetSendQuotaResponse = Awso_ses.Values.GetSendQuotaResponse

Represents your Amazon SES daily sending quota, maximum send rate, and the number of emails you have sent in the last 24 hours.

Source

module GetIdentityVerificationAttributesResponse =
  Awso_ses.Values.GetIdentityVerificationAttributesResponse

The Amazon SES verification status of a list of identities. For domain identities, this response also contains the verification token.

Source

module GetIdentityVerificationAttributesRequest =
  Awso_ses.Values.GetIdentityVerificationAttributesRequest

Represents a request to return the Amazon SES verification status of a list of identities. For domain identities, this request also returns the verification token. For information about verifying identities with Amazon SES, see the Amazon SES Developer Guide.

Source

module GetIdentityPoliciesResponse =
  Awso_ses.Values.GetIdentityPoliciesResponse

Represents the requested sending authorization policies.

Sourcemodule GetIdentityPoliciesRequest = Awso_ses.Values.GetIdentityPoliciesRequest

Represents a request to return the requested sending authorization policies for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Source

module GetIdentityNotificationAttributesResponse =
  Awso_ses.Values.GetIdentityNotificationAttributesResponse

Represents the notification attributes for a list of identities.

Source

module GetIdentityNotificationAttributesRequest =
  Awso_ses.Values.GetIdentityNotificationAttributesRequest

Represents a request to return the notification attributes for a list of identities you verified with Amazon SES. For information about Amazon SES notifications, see the Amazon SES Developer Guide.

Source

module GetIdentityMailFromDomainAttributesResponse =
  Awso_ses.Values.GetIdentityMailFromDomainAttributesResponse

Represents the custom MAIL FROM attributes for a list of identities.

Source

module GetIdentityMailFromDomainAttributesRequest =
  Awso_ses.Values.GetIdentityMailFromDomainAttributesRequest

Represents a request to return the Amazon SES custom MAIL FROM attributes for a list of identities. For information about using a custom MAIL FROM domain, see the Amazon SES Developer Guide.

Source

module GetIdentityDkimAttributesResponse =
  Awso_ses.Values.GetIdentityDkimAttributesResponse

Represents the status of Amazon SES Easy DKIM signing for an identity. For domain identities, this response also contains the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES successfully verified that these tokens were published.

Source

module GetIdentityDkimAttributesRequest =
  Awso_ses.Values.GetIdentityDkimAttributesRequest

Represents a request for the status of Amazon SES Easy DKIM signing for an identity. For domain identities, this request also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES successfully verified that these tokens were published. For more information about Easy DKIM, see the Amazon SES Developer Guide.

Source

module GetCustomVerificationEmailTemplateResponse =
  Awso_ses.Values.GetCustomVerificationEmailTemplateResponse

The content of the custom verification email template.

Source

module GetCustomVerificationEmailTemplateRequest =
  Awso_ses.Values.GetCustomVerificationEmailTemplateRequest

Represents a request to retrieve an existing custom verification email template.

Source

module GetAccountSendingEnabledResponse =
  Awso_ses.Values.GetAccountSendingEnabledResponse

Represents a request to return the email sending status for your Amazon SES account in the current Amazon Web Services Region.

Source

module DescribeReceiptRuleSetResponse =
  Awso_ses.Values.DescribeReceiptRuleSetResponse

Represents the details of the specified receipt rule set.

Source

module DescribeReceiptRuleSetRequest =
  Awso_ses.Values.DescribeReceiptRuleSetRequest

Represents a request to return the details of a receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module DescribeReceiptRuleResponse =
  Awso_ses.Values.DescribeReceiptRuleResponse

Represents the details of a receipt rule.

Sourcemodule DescribeReceiptRuleRequest = Awso_ses.Values.DescribeReceiptRuleRequest

Represents a request to return the details of a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module DescribeConfigurationSetResponse =
  Awso_ses.Values.DescribeConfigurationSetResponse

Represents the details of a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module DescribeConfigurationSetRequest =
  Awso_ses.Values.DescribeConfigurationSetRequest

Represents a request to return the details of a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module DescribeActiveReceiptRuleSetResponse =
  Awso_ses.Values.DescribeActiveReceiptRuleSetResponse

Represents the metadata and receipt rules for the receipt rule set that is currently active.

Source

module DescribeActiveReceiptRuleSetRequest =
  Awso_ses.Values.DescribeActiveReceiptRuleSetRequest

Represents a request to return the metadata and receipt rules for the receipt rule set that is currently active. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module DeleteVerifiedEmailAddressRequest =
  Awso_ses.Values.DeleteVerifiedEmailAddressRequest

Represents a request to delete an email address from the list of email addresses you have attempted to verify under your Amazon Web Services account.

Sourcemodule DeleteTemplateResponse = Awso_ses.Values.DeleteTemplateResponse

Deletes an email template. You can execute this operation no more than once per second.

Sourcemodule DeleteTemplateRequest = Awso_ses.Values.DeleteTemplateRequest

Represents a request to delete an email template. For more information, see the Amazon SES Developer Guide.

Source

module DeleteReceiptRuleSetResponse =
  Awso_ses.Values.DeleteReceiptRuleSetResponse

An empty element returned on a successful request.

Source

module DeleteReceiptRuleSetRequest =
  Awso_ses.Values.DeleteReceiptRuleSetRequest

Represents a request to delete a receipt rule set and all of the receipt rules it contains. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule DeleteReceiptRuleResponse = Awso_ses.Values.DeleteReceiptRuleResponse

An empty element returned on a successful request.

Sourcemodule DeleteReceiptRuleRequest = Awso_ses.Values.DeleteReceiptRuleRequest

Represents a request to delete a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module DeleteReceiptFilterResponse =
  Awso_ses.Values.DeleteReceiptFilterResponse

An empty element returned on a successful request.

Sourcemodule DeleteReceiptFilterRequest = Awso_ses.Values.DeleteReceiptFilterRequest

Represents a request to delete an IP address filter. You use IP address filters when you receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule DeleteIdentityResponse = Awso_ses.Values.DeleteIdentityResponse

An empty element returned on a successful request.

Sourcemodule DeleteIdentityRequest = Awso_ses.Values.DeleteIdentityRequest

Represents a request to delete one of your Amazon SES identities (an email address or domain).

Source

module DeleteIdentityPolicyResponse =
  Awso_ses.Values.DeleteIdentityPolicyResponse

An empty element returned on a successful request.

Source

module DeleteIdentityPolicyRequest =
  Awso_ses.Values.DeleteIdentityPolicyRequest

Represents a request to delete a sending authorization policy for an identity. Sending authorization is an Amazon SES feature that enables you to authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

Source

module DeleteCustomVerificationEmailTemplateRequest =
  Awso_ses.Values.DeleteCustomVerificationEmailTemplateRequest

Represents a request to delete an existing custom verification email template.

Source

module DeleteConfigurationSetTrackingOptionsResponse =
  Awso_ses.Values.DeleteConfigurationSetTrackingOptionsResponse

An empty element returned on a successful request.

Source

module DeleteConfigurationSetTrackingOptionsRequest =
  Awso_ses.Values.DeleteConfigurationSetTrackingOptionsRequest

Represents a request to delete open and click tracking options in a configuration set.

Source

module DeleteConfigurationSetResponse =
  Awso_ses.Values.DeleteConfigurationSetResponse

An empty element returned on a successful request.

Source

module DeleteConfigurationSetRequest =
  Awso_ses.Values.DeleteConfigurationSetRequest

Represents a request to delete a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module DeleteConfigurationSetEventDestinationResponse =
  Awso_ses.Values.DeleteConfigurationSetEventDestinationResponse

An empty element returned on a successful request.

Source

module DeleteConfigurationSetEventDestinationRequest =
  Awso_ses.Values.DeleteConfigurationSetEventDestinationRequest

Represents a request to delete a configuration set event destination. Configuration set event destinations are associated with configuration sets, which enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module CustomVerificationEmailTemplateAlreadyExistsException =
  Awso_ses.Values.CustomVerificationEmailTemplateAlreadyExistsException

Indicates that a custom verification email template with the name you specified already exists.

Source

module CustomVerificationEmailInvalidContentException =
  Awso_ses.Values.CustomVerificationEmailInvalidContentException

Indicates that custom verification email template provided content is invalid.

Sourcemodule CreateTemplateResponse = Awso_ses.Values.CreateTemplateResponse

Creates an email template. Email templates enable you to send personalized email to one or more destinations in a single operation. For more information, see the Amazon SES Developer Guide. You can execute this operation no more than once per second.

Sourcemodule CreateTemplateRequest = Awso_ses.Values.CreateTemplateRequest

Represents a request to create an email template. For more information, see the Amazon SES Developer Guide.

Source

module CreateReceiptRuleSetResponse =
  Awso_ses.Values.CreateReceiptRuleSetResponse

An empty element returned on a successful request.

Source

module CreateReceiptRuleSetRequest =
  Awso_ses.Values.CreateReceiptRuleSetRequest

Represents a request to create an empty receipt rule set. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule CreateReceiptRuleResponse = Awso_ses.Values.CreateReceiptRuleResponse

An empty element returned on a successful request.

Sourcemodule CreateReceiptRuleRequest = Awso_ses.Values.CreateReceiptRuleRequest

Represents a request to create a receipt rule. You use receipt rules to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module CreateReceiptFilterResponse =
  Awso_ses.Values.CreateReceiptFilterResponse

An empty element returned on a successful request.

Sourcemodule CreateReceiptFilterRequest = Awso_ses.Values.CreateReceiptFilterRequest

Represents a request to create a new IP address filter. You use IP address filters when you receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Source

module CreateCustomVerificationEmailTemplateRequest =
  Awso_ses.Values.CreateCustomVerificationEmailTemplateRequest

Represents a request to create a custom verification email template.

Source

module CreateConfigurationSetTrackingOptionsResponse =
  Awso_ses.Values.CreateConfigurationSetTrackingOptionsResponse

An empty element returned on a successful request.

Source

module CreateConfigurationSetTrackingOptionsRequest =
  Awso_ses.Values.CreateConfigurationSetTrackingOptionsRequest

Represents a request to create an open and click tracking option object in a configuration set.

Source

module CreateConfigurationSetResponse =
  Awso_ses.Values.CreateConfigurationSetResponse

An empty element returned on a successful request.

Source

module CreateConfigurationSetRequest =
  Awso_ses.Values.CreateConfigurationSetRequest

Represents a request to create a configuration set. Configuration sets enable you to publish email sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module CreateConfigurationSetEventDestinationResponse =
  Awso_ses.Values.CreateConfigurationSetEventDestinationResponse

An empty element returned on a successful request.

Source

module CreateConfigurationSetEventDestinationRequest =
  Awso_ses.Values.CreateConfigurationSetEventDestinationRequest

Represents a request to create a configuration set event destination. A configuration set event destination, which can be either Amazon CloudWatch or Amazon Kinesis Firehose, describes an Amazon Web Services service in which Amazon SES publishes the email sending events associated with a configuration set. For information about using configuration sets, see the Amazon SES Developer Guide.

Source

module CloneReceiptRuleSetResponse =
  Awso_ses.Values.CloneReceiptRuleSetResponse

An empty element returned on a successful request.

Sourcemodule CloneReceiptRuleSetRequest = Awso_ses.Values.CloneReceiptRuleSetRequest

Represents a request to create a receipt rule set by cloning an existing one. You use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

Sourcemodule Cli : sig ... end